Things Embedded are an official Diamond Systems USA distributor and can supply the DS-MPE-SER4M.
he DS-MPE-SER4M is a rugged, low cost 4-port high speed PCIe MiniCard module that is ideal for serial I/O expansion in embedded and OEM applications.
It offers four RS-232/422/485 serial ports in the PCIe MiniCard full size form factor with an extended operating temperature of -40°C to +85°C. Data rates on every port are up to 1Mbps in RS-232 mode, and 10Mbps in RS-422 and RS-485 modes. The board’s protocols can be set by jumpers or programmatically selected with GPIO lines built into the UART and controlled via software. The serial I/O signals are provided on two miniature connectors with two ports per connector.
Extended temperature capability (-40°C to +85°C) enables the board to operate in environments with extreme temperature swings, such as vehicles or outdoor installations. In addition, the board may be custom-configured with 0-ohm resistors in place of jumper blocks for increased ruggedness in high-vibration environments.
The DS-MPE-SER4M product comes with the PCIe MiniCard hardware assembly, a cable kit with two dual serial cables, and a hardware kit containing jumpers and mounting screws.
| Overview | |
|---|---|
| Brand & Model | Diamond Systems DS-MPE-SER4M |
| Rugged High-Speed 4-Port Serial mPCIe Card with Latching Connectors | |
| Features | Compact Industrial Rugged |
| Number of serial ports | 4 |
| Protocols | RS-232/422/485 on each port jumper or software configured |
| Maximum baud rate | RS-232: 1Mbps |
| RS-422/485: 10Mbps | |
| UARTs | 16550 compatible |
| FIFO | 256-byte TX/RX |
| ESD protection | +/-15KV |
| Input power | +3.3VDC +/-5% |
| Power consumption | 0.462W @ 3.3V |
| Software drivers | Windows XP |
| Linux 2.6.16, 2.6.27, 2.6.31, 2.6.32 | |
| Form Factor | PCIe MiniCard full size |
| Dimensions | 50.95 x 30mm (2 x 1.18″) |
| Operating temperature | -40ºC to +85ºC |
| Operating humidity | 5% to 95% noncondensing |
| MTBF | tbd |
| Weight | 8.5g (0.3oz) |
| RoHS | Compliant |
Tell us about your application and a member of the team will get right back to you.