Embedded Box PCs

Neousys embedded PCs are designed and built by a Taipei manufacturer that specializes in rugged embedded computing for machine vision, vehicles and robotics. Its computers run on Intel, AMD, NVIDIA Jetson and Arm processors, with wide-temperature operation standard across the range.

SolidRun embedded box PCs are designed and manufactured in Acre, Israel, by a company that has built embedded computers since 2010. Its Bedrock line pairs AMD Ryzen processors with a conduction-cooled chassis rated −40 to 85 °C and a wide DC input.

Forecr embedded computers are designed in Tallinn, Estonia, by a company that builds only on NVIDIA Jetson. The same Jetson module runs through its whole line-up, from a bare industrial carrier board to a sealed MIL-STD mission computer, with no change of software.

Vecow embedded systems are designed in Taiwan by a manufacturer of rugged edge AI and embedded computing for machine vision, robotics, rail and vehicles. Its wider range runs on Intel, AMD, NVIDIA Jetson, Qualcomm and NXP processors, with fanless, wide-temperature designs across much of it.

Sintrones fanless embedded PCs are designed in Taiwan by a manufacturer that focuses on vehicles, rail and transport. Most of its range is designed to E-Mark, EN 50155 or EN 45545-2 requirements, with ignition sensing, wide DC input and M12 connector options.

DFI box PCs are designed by a manufacturer that has built industrial motherboards and embedded computers in Taipei since 1981, now part of the Qisda and BenQ Group. DFI backs its boards and systems with up to 15 years of long-term support.

Premio embedded computer systems are designed by a company that has built computers in Greater Los Angeles since 1989. Research and engineering for its rugged range sit in Taipei, where C&T Solution became Premio Taiwan in January 2026.

ASRock Industrial embedded PCs are designed in Taipei by a company that began as ASRock’s industrial division and has run independently within the Pegatron group since 2018. Its range runs from NUC and Mini-ITX boards to fanless box PCs and Jetson Orin systems.

Giada embedded box PCs are designed in Shenzhen by a manufacturer best known for digital signage players and embedded computers. Its range covers Intel, AMD and Rockchip platforms, from OPS slot-in computers and fanless box PCs to industrial motherboards and Arm boards.

Arestech fanless embedded PCs are designed and manufactured in Taiwan by a company that has built IP-rated panel PCs, touch monitors and fanless computers since 2011. Its range is organized by ingress protection, from front-sealed builds to full IP66 and IP69K stainless steel.

Axiomtek embedded computers are designed by one of Taiwan’s major manufacturers of industrial and embedded computers. Its range spans fanless box PCs, panel PCs and HMIs, railway and in-vehicle computers, single board computers and edge AI systems on Intel, AMD and NVIDIA Jetson.

Advantech embedded systems are designed by a company that has built industrial computers in Taipei since 1983, from embedded boards and industrial PCs to rackmount systems and GPU servers. Its range also covers NVIDIA GPU cards and fanless MIC edge AI systems.

Nexcom fanless box PCs are designed by a company that has built industrial computers in Taipei since 1992, with more than 300 R&D engineers across six business divisions. Its embedded range covers fanless computers, signage players, gateways, boards, panel PCs and touch monitors.

Winmate box PCs are designed and manufactured in New Taipei City by a company that has built rugged computers since 1996. Its range is built in Taiwan to IP, MIL-STD-810 and ATEX requirements for logistics, maritime, defense, healthcare and process industries.

Yuan embedded computer systems are designed by a company that has built video capture hardware in Taiwan since 1990 and describes its business as image acquisition, conversion, streaming and analysis. Its range runs from capture cards and AV over IP to NVIDIA Jetson edge AI systems.

Diamond Systems embedded PCs are designed and manufactured in Sunnyvale, California, by a specialist in rugged, I/O-rich embedded computing. Products are qualified across their full temperature range during design and backed by lifecycles of seven years or more.

EverFocus embedded box PCs are designed in Taiwan by a company known for surveillance and edge AI vision platforms for transport, retail, fleets and mobile robots. Its range includes edge AI cameras, mobile video recorders and vision computing platforms on NVIDIA Jetson.

Stereolabs fanless embedded PCs are designed by a company that builds AI stereo and monocular cameras for robots, autonomous machines and spatial analytics. ZED cameras, ZED Link capture cards and ZED Box computers share the ZED SDK’s depth sensing, positional tracking and object detection.