US Video Extenders
HDMI Over Cat6 and SDI Over Fiber for Long Cable Runs
A video extender carries a signal further than its own cable standard allows, so a source in one room can feed a display, recorder or switcher in another. The range covers HDMI over Cat6 transmitter and receiver pairs that run HDMI 2.0 at 4K60 over 10G copper on Cat6A cable, SDI fiber extenders on single-mode fiber, and reclocking repeaters for 3G-SDI and 12G-SDI.
Options include up to 10 km over single-mode fiber with an SFP port for other modules, an SDI loop-out at the fiber transmitter, eight channels of audio over the copper link and up to 16 channels of SDI audio on the fiber and repeater units, suited to stadiums, outside broadcast, campuses and industrial sites where cable runs are long.
Speak to a video extender specialist to match the cable type, distance and signal format to your installation.
Browse Our SDI Extenders and Repeaters
- Simultaneous Video Inputs: 1
- Video Input: 1x LC Fiber (Single-Mode)
- Max Input Resolution: HD60 [1920x1080p @ 60/50fps]
- Video Output: 1x SDI
- Max Video Capture Resolution: HD60 [1920x1080p @ 60/50fps]
- Power: 7.5-15V DC
- Simultaneous Video Inputs: 1
- Video Input: 1x SDI
- Max Input Resolution: HD60 [1920x1080p @ 60/50fps]
- Video Output: 1x LC Fiber (Single-Mode), 1x SDI
- Max Video Capture Resolution: HD60 [1920x1080p @ 60/50fps]
- Power: 7.5-15V DC
- Simultaneous Video Inputs: 1
- Video Input: 1x SDI
- Max Input Resolution: HD60 [1920x1080p @ 60/50fps]
- Video Output: 1x SDI
- Max Video Capture Resolution: HD60 [1920x1080p @ 60/50fps]
- Power: 7.5-15V DC
- Simultaneous Video Inputs: 1
- Video Input: 1x 12G-SDI
- Max Input Resolution: 4K60 [4096×2160p @ 60/50fps]
- Video Output: 1x 12G-SDI
- Max Video Capture Resolution: 4K60 [4096x2160p @ 60/50/30/25/24fps]
- Power: 7.5-15V DC
- Simultaneous Video Inputs: 1
- Video Input: 1x RJ45 (10G)
- Video Output: 1x HDMI2.0
- Power: 7.5-15V DC
- Simultaneous Video Inputs: 1
- Video Input: 1x HDMI2.0
- Max Input Resolution: 4K60 [4096×2160p @ 60/50fps]
- Video Output: 1x RJ45 (10G)
- Power: 7.5-15V DC
Video Extender Ranges Configured by Things Embedded
We work with a leading manufacturer of broadcast extenders, so the ranges below are the ones we specify for long runs between rooms, buildings and camera positions. Compare them by cable, distance and format, then browse the models above or ask a broadcast video specialist which range suits your installation.
Yuan HDMI 2.0 Over Copper Extenders
A transmitter and receiver pair that carries HDMI 2.0 at 4K60 over 10G copper on Cat6A cable, with eight channels of audio.
Yuan SDI and 12G-SDI Repeaters
Reclocking repeaters that restore and amplify a 3G-SDI or 12G-SDI signal to extend a cable run.
Yuan SDI Fiber Extenders
A 3G-SDI transmitter and receiver pair on single-mode LC fiber with up to 10 km reach, an SDI loop-out and an SFP port.
Not sure which range fits? Tell us the application and we will recommend the right model.
What to Specify in a Long-Distance Video Link
Our broadcast video specialists specify every extender against the signal, the distance and the cable already in place. These are the choices we work through with you before recommending a pair.
Cable and Distance
Cat6A copper suits runs inside a building; single-mode fiber reaches up to 10 km; a repeater extends an existing SDI run.
Signal Format
HDMI 2.0 at 4K60 over copper, 3G-SDI over fiber and 3G-SDI or 12G-SDI through the repeaters.
Fiber Modules
LC single-mode connectors, with an SFP port on the fiber receiver for other modules and reaches.
Audio
Eight channels with HDMI over copper and up to 16 channels of embedded SDI audio over fiber.
Loop-Out
The SDI fiber transmitter has a loop-out for a local monitor at the source.
Power
Compact units run from a 7.5 to 15 V DC supply at each end of the link.
Explore Converters, AV Over IP and Capture
Compare extenders with the converters, splitters and AV over IP links that move the same signals around a site.
Video Extender Innovation & Long-Distance Video Insights
Speak to a Video Extender Specialist.
Tell us the signal, the distance and the cable already in place between source and destination. We will recommend the right extender or repeater, then configure and test the pair before it ships.