US Yuan
// Headquartered in Taiwan. Founded in 1990.
Yuan USA Distributor
YUAN High-Tech has designed video capture hardware in Taiwan since 1990 and describes its business as image acquisition, conversion, streaming and analysis. The range runs from SD composite to 8K HDMI 2.1 and 12G-SDI capture cards on PCIe, M.2, Mini PCIe and USB 3, through SDVoE AV-over-IP decoders, to NVIDIA Jetson Orin carrier boards and edge AI computers with the NexVDO SDK.
01 Product Range
YUAN Video Capture, AV over IP and Edge AI
Seven product families: video capture from SD to 8K on PCIe, M.2, Mini PCIe and USB, AV over IP encoders and SDVoE, SDI and HDMI converters, and NVIDIA Jetson and IGX edge AI hardware. Pick the family that matches the job, then the model that matches the signal and channel count.
4K and 8K Video Capture Cards
10-bit 4K and 8K capture on PCIe and M.2: HDMI 2.1 at 8K60, HDMI 2.0 and 12G-SDI at 4K60 in one, two and four channels, DisplayPort 1.4a at 8K30, a 12G-SDI input and output card with genlock for broadcast, and SDVoE cards that take 4K video straight off a 10G network.
- HDMI 2.1 at 8K60, HDMI 2.0 and 12G-SDI at 4K60 on PCIe and M.2
- One, two and four channel cards with loop-through and HDR
- 12G-SDI genlock card for broadcast timing
- SDVoE capture over 10G copper or fiber
Models in This Family
Full HD and SD Video Capture Cards
Uncompressed HD capture that leaves encoding to the host: 10-bit 1080p60 cards for HDMI, 3G-SDI, DVI and analog inputs in one to 16 channels, HD-TVI cards for CCTV, and standard-definition composite cards for legacy sources, on PCIe, M.2 and Mini PCIe.
- SC400 and SC420: 10-bit 1080p60 HDMI, SDI, all-in-one and TVI
- SC550, SC542 and SC540: HD capture with real-time recording
- SC3 series: composite and S-Video capture for legacy CCTV
- PCIe, M.2 and Mini PCIe versions of most cards
Models in This Family
H.264 Hardware Encoding Capture Cards
Capture cards with an on-board H.264 encoder that takes multi-channel recording and streaming off the host processor: the SC5C0 series at 1080p60 and the SC5A0 series at 1080p30, with HDMI, 3G-SDI, HDV and hybrid inputs on PCIe, M.2 and Mini PCIe.
- SC5C0: HD60 hardware encoding in one to eight channels
- SC5A0: HD30 hardware encoding in one to eight channels
- HDMI, SDI, HDV, HDAV and hybrid SDI and DVI inputs
- M.2 A/E-key, B/M-key and Mini PCIe versions
Models in This Family
USB Video Capture Devices
Plug-in capture for laptops and sealed PCs: UVC devices for HDMI 2.1 at 8K60 and 4K144, HDMI 2.0 at 4K60 with HDR and 12G-SDI, with loop-through and keyboard and mouse control on selected models, plus all-in-one units, a four-channel hybrid recorder and compact USB Type-C dongles.
- UB700G and UB575G: HDMI 2.1 capture at up to 8K60
- UB579G, UB576G and UB570G PRO: HDMI 2.0 or 12G-SDI at 4K60
- UB575 AIO and UB5A0N4 Hybrid: all-in-one and four-channel inputs
- PD570, PD575 and PD576: compact USB Type-C dongles
Models in This Family
AV over IP Encoders, Decoders and SDVoE
Video over IP for live production, control rooms and pro AV: NDI and Dante AV encoders and decoders, H.26X streaming encoders with RTSP, RTMP, SRT and HLS, four-channel encoders with on-device AI, and SDVoE transmitters and receivers that carry 4K video over 10G copper or fiber with very low latency.
- SC6F0N1: NDI and Dante AV-H transceivers for HDMI 2.0 and 12G-SDI
- SC6E0N1 and SC6G0N1: HDMI, UVC and IP bridges with NDI HX and Dante AV-H options
- SC6T0N4 AI+: four-channel encoders with on-device AI
- SDVoE transmitters, receivers and AIR6N0-C NX SDVoE systems
Models in This Family
SDI and HDMI Converters, Extenders and Splitters
Signal-chain hardware for broadcast and pro AV: SDI to HDMI and HDMI to SDI converters in HD and 4K, quad-link and 12G-SDI conversion, genlock and cross converters, audio embedders and de-embedders, copper and fiber extenders, SDI repeaters, splitters, a 4K HDMI matrix and quad multiviewers.
- HD and 4K SDI and HDMI converters, including quad-link and 12G-SDI
- Genlock, cross conversion and audio embedding
- HDMI 2.0 over copper and SDI over fiber extenders
- Splitters, a 4×4 HDMI 2.0 matrix and quad multiviewers
Models in This Family
NVIDIA Jetson and IGX Edge AI Boards and Computers
Edge AI hardware built around video input: Jetson Thor and AGX Orin carrier boards and computers, an AI NVR with eight PoE ports, the NEAR T7X on NVIDIA IGX Thor, the AIR6N0-C-MB NX carrier for Orin NX and Orin Nano, compact Pandora systems including Pandora Health builds with HDMI and SDI capture, VPP6N0 computers, and Holoscan sensor bridges that feed live video into NVIDIA Holoscan.
- ARC6N0 and EDG6N0: Jetson Thor and AGX Orin carrier boards and computers
- NEAR T7X: NVIDIA IGX Thor with an optional RTX PRO 6000 Blackwell GPU
- Pandora and Pandora Health: compact Orin NX and Orin Nano systems
- AIR6N0-C-MB NX and VPP6N0: Orin carrier board and computers
- Holoscan sensor bridges for HDMI, 12G-SDI and GMSL2
Models in This Family
// LOADING...
Browse Yuan's Latest Products
Or choose a product family above.
- AI Performance: 70–100 TOPS
- SOM: NVIDIA Jetson Orin NX 16GB, NVIDIA Jetson Orin NX 8GB
- Memory: 16GB Soldered On-board, 8GB Soldered On-board
- OS: Linux, Linux Ubuntu 22.04
- Display Outputs: 1x HDMI
- Ethernet: 2x GbE LAN [RJ45]
- USB: 1x USB 3.2 Gen 2 [Type C], 2x USB 2.0 [Type A], 2x USB 3.2 Gen 2 [Type A]
- CANbus: 1x CANbus [Board]
- Simultaneous Video Inputs: 4
- Video Input: 4x SDI
- M.2: 1x M.2 B-Key [USB] [3042/3052], 1x M.2 E-Key [PCIe x1 Gen4/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen4] [2280]
- Storage: 1x M.2 SSD
- Power: 12-36V DC [Barrel Connector]
- Temp: 0°C to 60°C [32°F to 140°F]
- AI Performance: 70–100 TOPS
- SOM: NVIDIA Jetson Orin NX 16GB, NVIDIA Jetson Orin NX 8GB
- Memory: 16GB Soldered On-board, 8GB Soldered On-board
- OS: Linux, Linux Ubuntu 22.04
- Display Outputs: 1x HDMI
- Ethernet: 2x GbE LAN [RJ45]
- USB: 1x USB 3.2 Gen 2 [Type C], 2x USB 2.0 [Type A], 2x USB 3.2 Gen 2 [Type A]
- CANbus: 1x CANbus [Board]
- Video Input: 1x 3G-SDI, 1x HDMI
- M.2: 1x M.2 B-Key [USB] [3042/3052], 1x M.2 E-Key [PCIe x1 Gen4/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen4] [2280]
- Storage: 1x M.2 SSD
- Power: 12-36V DC [Barrel Connector]
- Temp: 0°C to 60°C [32°F to 140°F]
- AI Performance: 70–100 TOPS
- SOM: NVIDIA Jetson Orin NX 16GB, NVIDIA Jetson Orin NX 8GB
- Memory: 16GB Soldered On-board, 8GB Soldered On-board
- OS: Linux, Linux Ubuntu 22.04
- Display Outputs: 1x HDMI
- Ethernet: 2x GbE LAN [RJ45]
- USB: 1x USB 3.2 Gen 2 [Type C], 2x USB 2.0 [Type A], 2x USB 3.2 Gen 2 [Type A]
- CANbus: 1x CANbus [Board]
- Simultaneous Video Inputs: 1
- Video Input: 1x SDI
- Video Output: 1x SDI
- M.2: 1x M.2 B-Key [USB] [3042/3052], 1x M.2 E-Key [PCIe x1 Gen4/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen4] [2280]
- Storage: 1x M.2 SSD
- Power: 12-36V DC [Barrel Connector]
- Temp: 0°C to 60°C [32°F to 140°F]
- AI Performance: 70–100 TOPS
- SOM: NVIDIA Jetson Orin NX 16GB, NVIDIA Jetson Orin NX 8GB
- Memory: 16GB Soldered On-board, 8GB Soldered On-board
- OS: Linux, Linux Ubuntu 22.04
- Display Outputs: 1x HDMI
- Ethernet: 2x GbE LAN [RJ45]
- USB: 1x USB 3.2 Gen 2 [Type C], 2x USB 2.0 [Type A], 2x USB 3.2 Gen 2 [Type A]
- CANbus: 1x CANbus [Board]
- Simultaneous Video Inputs: 1
- Video Input: 1x HDMI2.0
- Video Output: 1x HDMI2.0
- M.2: 1x M.2 B-Key [USB] [3042/3052], 1x M.2 E-Key [PCIe x1 Gen4/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen4] [2280]
- Storage: 1x M.2 SSD
- Power: 12-36V DC [Barrel Connector]
- Temp: 0°C to 60°C [32°F to 140°F]
- AI Performance: 20 TOPS
- SOM: NVIDIA Jetson Orin Nano 4GB
- Memory: 4GB Soldered On-board
- OS: Linux, Linux Ubuntu 22.04
- Display Outputs: 1x HDMI
- Ethernet: 2x GbE LAN [RJ45]
- USB: 1x USB 3.2 Gen 2 [Type C], 2x USB 2.0 [Type A], 2x USB 3.2 Gen 2 [Type A]
- CANbus: 1x CANbus [Board]
- M.2: 1x M.2 B-Key [USB] [3042/3052], 1x M.2 E-Key [PCIe x1 Gen3/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen3] [2280], 1x M.2 M-Key [PCIe x4 Gen3] [2280/3080]
- Storage: 1x M.2 SSD
- Power: 9-36V DC [Barrel Connector]
- Temp: 0°C to 60°C [32°F to 140°F]
- AI Performance: 40 TOPS
- SOM: NVIDIA Jetson Orin Nano 8GB
- Memory: 8GB Soldered On-board
- OS: Linux, Linux Ubuntu 22.04
- Display Outputs: 1x HDMI
- Ethernet: 2x GbE LAN [RJ45]
- USB: 1x USB 3.2 Gen 2 [Type C], 2x USB 2.0 [Type A], 2x USB 3.2 Gen 2 [Type A]
- CANbus: 1x CANbus [Board]
- M.2: 1x M.2 B-Key [USB] [3042/3052], 1x M.2 E-Key [PCIe x1 Gen3/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen3] [2280], 1x M.2 M-Key [PCIe x4 Gen3] [2280/3080]
- Storage: 1x M.2 SSD
- Power: 9-36V DC [Barrel Connector]
- Temp: 0°C to 60°C [32°F to 140°F]
- AI Performance: 70 TOPS
- SOM: NVIDIA Jetson Orin NX 8GB
- Memory: 8GB Soldered On-board
- OS: Linux, Linux Ubuntu 22.04
- Display Outputs: 1x HDMI
- Ethernet: 2x GbE LAN [RJ45]
- USB: 1x USB 3.2 Gen 2 [Type C], 2x USB 2.0 [Type A], 2x USB 3.2 Gen 2 [Type A]
- CANbus: 1x CANbus [Board]
- M.2: 1x M.2 B-Key [USB] [3042/3052], 1x M.2 E-Key [PCIe x1 Gen4/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen4] [2280], 1x M.2 M-Key [PCIe x4 Gen4] [2280/3080]
- Storage: 1x M.2 SSD
- Power: 12-36V DC [Barrel Connector]
- Temp: 0°C to 60°C [32°F to 140°F]
- AI Performance: 100 TOPS
- SOM: NVIDIA Jetson Orin NX 16GB
- Memory: 16GB Soldered On-board
- OS: Linux, Linux Ubuntu 22.04
- Display Outputs: 1x HDMI
- Ethernet: 2x GbE LAN [RJ45]
- USB: 1x USB 3.2 Gen 2 [Type C], 2x USB 2.0 [Type A], 2x USB 3.2 Gen 2 [Type A]
- CANbus: 1x CANbus [Board]
- M.2: 1x M.2 B-Key [USB] [3042/3052], 1x M.2 E-Key [PCIe x1 Gen4/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen4] [2280], 1x M.2 M-Key [PCIe x4 Gen4] [2280/3080]
- Storage: 1x M.2 SSD
- Power: 12-36V DC [Barrel Connector]
- Temp: 0°C to 60°C [32°F to 140°F]
- AI Performance: 20–100 TOPS
- SOM: NVIDIA Jetson Orin Nano 4GB, NVIDIA Jetson Orin Nano 8GB, NVIDIA Jetson Orin NX 16GB, NVIDIA Jetson Orin NX 8GB
- Memory: 16GB Soldered On-board, 4GB Soldered On-board, 8GB Soldered On-board
- OS: Linux, Linux Ubuntu 22.04
- Display Outputs: 1x HDMI
- Ethernet: 2x GbE LAN [RJ45]
- USB: 2x USB 3.2 Gen 2 [Type A]
- Serial: 1x RS485 [Terminal Block]
- M.2: 1x M.2 M-Key [PCIe x2 Gen4] [2280]
- Storage: 1x Micro SD
- Power: 12-28V DC Input
- Temp: 0°C to 60°C [32°F to 140°F]
- Certification: CE, FCC
- AI Performance: 1,200–2,070 TOPS
- SOM: NVIDIA Jetson T4000, NVIDIA Jetson T5000
- Memory: 128GB Soldered On-board, 64GB Soldered On-board
- OS: Linux Ubuntu 24.04, Linux
- Display Outputs: 1x Display Port, 1x HDMI
- Ethernet: 1x 100GbE LAN [QSFP28], 1x 5 GbE LAN [RJ45]
- USB: 2x USB 3.2 Gen 2 [Type C], 4x USB 3.2 Gen 2 [Type A]
- CANbus: 4x CANbus [Board]
- M.2: 1x M.2 B-Key [USB] [2242/3042/3052], 1x M.2 E-Key [PCIe x1 Gen4/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen5] [2280]
- Power: 20-32V DC Input
- Temp: -25°C to 45°C [-13°F to 113°F]
- Certification: CE, FCC
- AI Performance: 1,200–2,070 TOPS
- SOM: NVIDIA Jetson T4000, NVIDIA Jetson T5000
- Memory: 128GB Soldered On-board, 64GB Soldered On-board
- OS: Linux Ubuntu 24.04, Linux
- Display Outputs: 1x Display Port, 1x HDMI
- Ethernet: 1x 100GbE LAN [QSFP28], 1x 5 GbE LAN [RJ45], 8x GbE LAN [RJ45] [PoE]
- USB: 2x USB 3.2 Gen 2 [Type C], 4x USB 3.2 Gen 2 [Type A]
- M.2: 1x M.2 B-Key [USB] [2242/3042/3052], 1x M.2 E-Key [PCIe x1 Gen4/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen4] [2280]
- Storage: 1x M.2 SSD, 2x 2.5" HDD/SSD [SATA]
- Power: 20-57V DC Input
- Temp: 0°C to 35°C [32°F to 95°F]
- Certification: CE, FCC
- AI Performance: 1,200–2,070 TOPS
- SOM: NVIDIA Jetson T4000, NVIDIA Jetson T5000
- Memory: 128GB Soldered On-board, 64GB Soldered On-board
- OS: Linux Ubuntu 24.04, Linux
- Display Outputs: 1x Display Port, 1x HDMI
- Ethernet: 1x 100GbE LAN [QSFP28], 1x 5 GbE LAN [RJ45]
- USB: 2x USB 3.2 Gen 2 [Type C], 4x USB 3.2 Gen 2 [Type A]
- CANbus: 4x CANbus [Board]
- M.2: 1x M.2 B-Key [USB] [2242/3042/3052], 1x M.2 E-Key [PCIe x1 Gen4/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen5] [2280]
- Power: 20-57V DC Input
- Temp: -20°C to 45°C [-4°F to 113°F]
- Certification: CE, FCC
- GPU: NVIDIA RTX PRO 6000 Blackwell Max-Q
- AI Performance: 2,070–3,511 TOPS
- SOM: IGX T7000
- Memory: 128GB Soldered On-board
- Display Outputs: 4x Display Ports
- Ethernet: 2x 100GbE LAN [QSFP112], 2x GbE LAN [RJ45]
- USB: 1x USB 3.2 Gen 2 [Type C], 4x USB 3.2 Gen 2 [Type A]
- M.2: 1x M.2 E-Key [PCIe x1/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen5] [2280]
- PCIe: 1x PCIe [x16 Slot] [x8 Signal] [Gen5]
- Storage: 4x SATA Ports
- Power: 100-240V AC
- Temp: 5°C to 45°C [41°F to 113°F]
- AI Performance: 70–100 TOPS
- SOM: NVIDIA Jetson Orin NX 16GB, NVIDIA Jetson Orin NX 8GB
- Memory: 16GB Soldered On-board, 8GB Soldered On-board
- OS: Linux, Linux Ubuntu 22.04
- Display Outputs: 1x Mini HDMI
- Ethernet: 1x GbE LAN [RJ45]
- USB: 4x USB 3.2 Gen 2 [Type C], 2x USB 3.2 Gen 2 [Type C], 3x USB 2.0 [Board]
- CANbus: 1x CANbus [Board]
- M.2: 1x M.2 E-Key [PCIe x1 Gen4/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen4] [2230]
- Power: 12-36V DC [2-Pin]
- Temp: 0°C to 60°C [32°F to 140°F]
- AI Performance: 70–100 TOPS
- SOM: NVIDIA Jetson Orin NX 16GB, NVIDIA Jetson Orin NX 8GB
- Memory: 16GB Soldered On-board, 8GB Soldered On-board
- OS: Linux, Linux Ubuntu 22.04
- Display Outputs: 1x Mini HDMI
- Ethernet: 1x GbE LAN [RJ45]
- USB: 2x USB 3.2 Gen 2 [Type C], 4x USB 2.0 [Board]
- CANbus: 1x CANbus [Board], 2x CANbus [Board]
- M.2: 1x M.2 B-Key [USB] [3042/3052], 1x M.2 E-Key [PCIe x1 Gen4/USB 2.0] [2230], 1x M.2 M-Key [PCIe x2 Gen4] [2230], 1x M.2 M-Key [PCIe x4 Gen4] [2230]
- Power: 12-36V DC [2-Pin]
- Temp: 0°C to 60°C [32°F to 140°F]
Why Choose YUAN
YUAN High-Tech has designed video capture hardware in Taipei, Taiwan, since 1990, with its own teams developing the hardware, drivers, firmware, FPGA logic and SDK behind every product. The range runs from SD to 8K capture on PCIe, M.2, Mini PCIe and USB to NVIDIA Jetson edge AI platforms, and as an official YUAN distributor we bring that range to USA projects.
In-House Video Engineering
YUAN's own R&D teams design the hardware, drivers, firmware, FPGA logic and SDK, so the whole capture path, from input connector to application, comes from one engineering group.
SD to 8K Coverage
Interfaces from 8K down to legacy SD, including HDMI, DisplayPort, SDI, DVI, VGA, YPbPr, composite and S-Video, so new and older video sources can be captured from one range.
Every Host Slot
The same capture families are built as PCIe, M.2, Mini PCIe and USB versions, so a design proven in a workstation can move into a box PC, carrier board or sealed system.
On-Board Encoding
Pro H.26X capture cards encode on the card, and YUAN's Jetson platforms handle H.26X and AV1 encoding and decoding, freeing the host processor for recording, streaming and analysis.
NexVDO SDK
One cross-platform SDK with modules for capture, recording, streaming and AI analysis, unified APIs across NVIDIA Jetson and Intel x86, and support for Windows, Linux and macOS.
NVIDIA Strategic Partner
As a strategic partner of NVIDIA, YUAN builds Jetson Orin and Jetson Thor carrier boards, edge computers and servers that place multichannel 4K60 capture right beside the AI processor.
Optimized Video Pipeline
Low-latency RDMA capture, color conversion, deinterlacing and display are built into YUAN's processing pipeline, tuned for NVIDIA and Intel GPU and NPU hardware ahead of encoding and AI analysis.
Built Into ODM Products
YUAN capture modules sit inside the product lines of leading ODM customers and channel partners worldwide, serving surveillance, industrial automation, healthcare, broadcast and education systems.
Local Support
Your YUAN Partner in the USA
Our YUAN news, case studies and white papers cover the latest hardware and projects we have delivered with them. As the official YUAN distributor in the USA, we help you choose the right YUAN capture card or Jetson board and support it locally for the life of your project. Capture cards can be fitted and tested in our hosts, and Jetson systems ship with JetPack loaded. When YUAN launches, updates or retires a product, we will update you directly, with time to plan the change or a last-time buy.
Fanless GPU Computer Built On A Custom Jetson Carrier Board
A customer needed a compact fanless GPU computer on a custom NVIDIA Orin carrier board, with serial control, 3G-SDI capture and GPIO sleep and shutdown, in battery and DC-powered versions.
Rugged Edge AI Computer Deployed with Object Tracking Engine
A developer of deep learning object tracking software deploys it in vehicles on a fanless Jetson AGX Xavier rugged edge AI computer, with RS-485 PTZ control and AHD, SDI and IP video inputs.
Equipping AI Medical Carts with Endoscopy Video Capture
A medical technology company building AI for colorectal and gastrointestinal diagnosis equipped its endoscopy carts with an EN 60601-1 certified medical cart computer and a custom HDMI and SDI capture card.
Autonomous Optical Detection and Tracking Technology with NVIDIA Jetson
An all-in-one PTZ camera for drone detection runs on Jetson AGX Orin with low-latency HDMI 2.0 capture, on a standard carrier or a custom wide-temperature board we built for the customer.
// Official YUAN Distributor
Speak to a YUAN Specialist.
Things Embedded is an official YUAN distributor and integration partner in the USA. Tell us the video signals, the channel count and the host you have to fit, and we will point you to the right family, then configure, image and test the system before it ships.
Phone · USA
+1 407 214 9446