UK NXP i.MX 94
i.MX 94 Boards for Industrial Networking and Real-Time Control
An NXP i.MX 94 board runs up to four Arm Cortex-A55 cores beside two Cortex-M33 and two Cortex-M7 real-time cores, with an Ethernet TSN switch built into the processor, the first in the i.MX range. The range covers SBCs and industrial motherboards built around the i.MX 94 (iMX94).
Options include up to five Ethernet ports with 2.5GbE on two, Profinet, EtherCAT, EtherNet/IP and OPC UA protocol support, an eIQ Neutron NPU, LPDDR4 or LPDDR5 with inline ECC, EdgeLock security and a safety island to SIL 2 hardware integrity, running Yocto Linux with a real-time OS on the Cortex-M cores, suited to industrial gateways, PLCs and motion controllers.
Speak to an i.MX 94 specialist to match the board, the network and the real-time needs to your application.
Browse Our i.MX 94 Boards
Sorry, this category is empty.
What to Specify in an i.MX 94 Board
Our embedded specialists specify every i.MX 94 board against the application, the I/O and the enclosure it goes into. These are the choices we work through with you before recommending a range.
Processor and Real-Time Cores
Up to four Cortex-A55 cores with two Cortex-M33 and two Cortex-M7 cores for deterministic control.
TSN Switch
A switch built into the processor with up to five Ethernet ports and 2.5GbE on two.
Industrial Protocols
Profinet, EtherCAT, EtherNet/IP, Modbus and OPC UA on the same network.
Safety and Security
A safety island to SIL 2 hardware integrity and EdgeLock secure boot and encryption.
AI
An eIQ Neutron NPU for anomaly detection and light vision at the gateway.
Operating System and BSP
Yocto Linux or Ubuntu images with the NXP board support package, drivers and eIQ tools installed and tested.
i.MX 94 Innovation & Industrial Networking Insights
Speak to an i.MX 94 Specialist.
Tell us where the board will be installed, the network and real-time needs and the interfaces you need to connect. We will recommend the right i.MX 94 board, then configure, image and test it before it ships.