UK TI Sitara AM335x
AM335x IoT Gateways for Industrial Data and Control
A TI Sitara AM335x gateway runs a single Arm Cortex-A8 core at up to 1 GHz with Linux at a few watts, which suits small industrial devices that read sensors, switch outputs and pass the data on over Ethernet or a cellular link. Our range uses the AM3352 with 1 GB of DDR3L memory and Debian pre-installed.
Options include isolated digital inputs and outputs, RS-232/422/485 and RS-485 serial, isolated CAN bus, 16-bit voltage or 4 to 20 mA analogue inputs, single or dual 10/100 Ethernet with PoE powered device input, and a mini PCIe socket for 3G, 4G or Wi-Fi, in DIN-rail cases rated from -25 to 70 °C, suited to remote monitoring, data logging, building control and machine connectivity.
Speak to an AM335x specialist to match the gateway, the I/O and the network to your installation.
Browse Our AM335x IoT Gateways
Or choose a range below.
- CPU: Sitara AM3352
- Memory: 1GB Soldered On-board
- OS: Linux Debian 9
- Ethernet: 2x 10/100 LAN [RJ45]
- USB: 1x USB 2.0 [Type A]
- mPCIe: 1x mPCIe [USB/SIM]
- Storage: 2x Micro SD
- Power: 12-25V DC [Terminal Block], PoE Powered Device (PD) [RJ45]
- Temp: -25°C to 70°C [-13°F to 158°F]
- Certification: CE, FCC
- Mounting Options: DIN Mount
- Serial: 1x RS232/422/485 [Terminal Block], 1x RS485 [Terminal Block]
- CPU: Sitara AM3352
- Memory: 1GB Soldered On-board
- Ethernet: 1x 10/100 LAN [RJ45]
- USB: 1x USB 2.0 [Type A]
- mPCIe: 1x mPCIe [USB/SIM]
- Storage: 2x Micro SD
- Power: 8-25V DC [Terminal Block]
- Temp: -25°C to 70°C [-13°F to 158°F]
- Certification: CE, FCC
- Mounting Options: DIN Mount
- OS: Linux Debian 8
- Serial: 2x RS232/422/485 [Terminal Block]
AM335x Ranges Configured by Things Embedded
We work with the manufacturers of AM335x gateways, so the ranges below are the ones we specify for remote monitoring, data logging and machine connectivity. Compare them by I/O, network and power input, then browse the gateways above or ask a specialist which range suits your installation.
IGT Arm Industrial IoT Gateways
Compact DIN-rail IoT gateways on the TI Sitara AM3352 Arm processor, shipped with Debian pre-installed. Isolated digital I/O, serial and CAN bus sit on terminal blocks, with 10/100 Ethernet, a mini PCIe socket for 3G, 4G or Wi-Fi, and versions with PoE powered device input or 16-bit analogue voltage and current inputs.
Not sure which range fits? Tell us the application and we will recommend the right model.
What to Specify in an AM335x Gateway
Our embedded specialists specify every AM335x gateway against the sensors, the network and the cabinet it goes into. These are the choices we work through with you before recommending a range.
Processor and Storage
A Cortex-A8 core at 1 GHz with 1 GB of DDR3L, and microSD slots for the system image and data.
Digital and Analogue I/O
Isolated digital inputs and outputs, or 16-bit voltage and 4 to 20 mA inputs for sensors and transmitters.
Wireless Expansion
A mini PCIe socket with a SIM slot for 3G, 4G or Wi-Fi modules and their antennas.
Networking and Serial
One or two 10/100 Ethernet ports, RS-232/422/485 and RS-485 serial, and isolated CAN bus.
Power and Temperature
8 to 25 V or 12 to 25 V DC, PoE powered device input on some versions, and -25 to 70 °C.
Operating System
Debian images with drivers for the I/O, serial and wireless modules installed and tested before shipping.
AM335x Industrial IoT Insights
Speak to an AM335x Specialist.
Tell us where the gateway will be installed, the sensors and signals it must read and the network available. We will recommend the right AM335x gateway, then configure, image and test it before it ships.