PC/104 Power Supplies
PC/104 Power Supplies for Vehicle and Aircraft Inputs
A PC/104 power supply sits in the stack and converts a vehicle, aircraft or battery input into the regulated +5 V, +12 V and +3.3 V rails the boards need, delivered through the stack connector with no separate harness.
The range covers DC/DC boards from 25 W to 50 W with wide input ranges, isolated versions, models with an integrated UPS and battery charger, and rugged versions built to MIL-STD-461, MIL-STD-704 and MIL-STD-1275, all rated for -40 to +85 °C.
Pair it with the host board and I/O modules it will power; the wider power supply range covers systems outside the stack.
Browse Our Range of PC/104 Power Supplies
- Power: 7-34V DC [Terminal Block]
- Temp: -40°C to 85°C [-40°F to 185°F]
-
JMM-7005-UPS
JUPITER-MM-7000 with 25 W 5 V output and UPS for industrial systems -
JMM-7012-UPS
JUPITER-MM-7000 with 40 W 12 V output and UPS for industrial systems -
JMM-7305-ISO-UPS
JUPITER-MM-7000 with 40 W isolated 5 V output, UPS and MIL-STD filtering -
JMM-7305-UPS
JUPITER-MM-7000 with 25 W 5 V output, UPS and MIL-STD filtering -
JMM-7312-ISO-UPS
JUPITER-MM-7000 with 40 W isolated 12 V output, UPS and MIL-STD filtering -
JMM-7312-UPS
JUPITER-MM-7000 with 40 W 12 V output, UPS and MIL-STD filtering
- Temp: -40°C to 85°C [-40°F to 185°F]
- Power: 9-36V DC Input
Complete the Stack
What to Check in a PC104 Power Supply
The power layer has to match both the supply on the platform and the load of every board above it. Input range, output rails and ride-through decide whether the stack stays up when the supply does not. These are the points to check.
PC/104 Power Innovation & Rugged Supply Insights
Size the Power Supply for Your Stack.
Tell us the platform supply, the boards in the stack and the standards it must meet. We will recommend the right PC/104 power supply, then build, configure and test the stack before it ships.



