Data Acquisition and I/O Modules
Data Acquisition and I/O Modules for Rugged Systems
Data acquisition and I/O modules give a rugged embedded computer the analog, digital, serial, CAN bus and Ethernet connections it needs to measure sensors, drive actuators and talk to the equipment around it.
The boards fit PC/104, PC/104-Plus, PCIe/104 and Mini PCIe hosts, so they stack on single board computers and Jetson carrier boards, and every module is rated for -40 to +85 °C with latching connectors for vibration.
Choose by signal type below, or read our guide to what PC/104 is and how a stack is built.
Browse Our Range of DAQ Cards
- CANbus: 2x Isolated CANbus, DB9
- Power: 3.3V DC [Bus]
- Temp: -40°C to 85°C [-40°F to 185°F]
-
JNMM-2L-XT
JANUS-MM-LP with 2 isolated CAN 2.0B ports, 16 digital I/O and PC/104 -
JNMM-2LP-XT
JANUS-MM-LP with 2 isolated CAN 2.0B ports, 16 digital I/O and PC/104-Plus -
JNMM-4L-XT
JANUS-MM-LP with 4 isolated CAN 2.0B ports, 16 digital I/O and PC/104 -
JNMM-4LP-XT
JANUS-MM-LP with 4 isolated CAN 2.0B ports, 16 digital I/O and PC/104-Plus
- Power: 5V DC [Bus]
- Temp: -40°C to 85°C [-40°F to 185°F]
- CANbus: 2x Isolated CANbus [Board]
- Power: 3.3V DC [Bus]
- Temp: -40°C to 85°C [-40°F to 185°F]
- Certification: RoHS
- Serial: 2x Isolated RS232 [Board], 2x Isolated RS485 [Board]
-
EMM-4E-XT
EMERALD-MM-8E/EL with 4 non-isolated RS-232/422/485 ports and 8 auxiliary I/O lines -
EMM-4EL-XT
EMERALD-MM-8E/EL with 4 opto-isolated RS-232/422/485 ports and 8 auxiliary I/O lines -
EMM-8E-XT
EMERALD-MM-8E/EL with 8 non-isolated RS-232/422/485 ports and 8 auxiliary I/O lines -
EMM-8EL-XT
EMERALD-MM-8E/EL with 8 opto-isolated RS-232/422/485 ports and 8 auxiliary I/O lines
- Power: 5V DC [Bus]
- Temp: -40°C to 85°C [-40°F to 185°F]
- Serial: 4x RS232/422/485 [Board]
Complete the Stack
What to Specify in a Data Acquisition Module
A data acquisition module adds analog, digital, serial or CAN I/O to an embedded computer, usually as a PC/104 stack or a Mini PCIe card. These are the points to check before you choose one.
Data Acquisition Innovation & Stack Insights
Match the I/O to Your Signals.
Tell us the signals you need to measure or control, the channel count and the host board. We will recommend the right modules, then configure and test the host computer before it ships.






















