Skip to main content
Loading...

Antaira LMP-1204G-SFP-T 12-Port Gigabit Managed Industrial Ethernet Switch with 8x PoE+, 4x SFP and -40 to 75 °C

The LMP-1204G-SFP-T is the extended temperature build of the Antaira LMP-1204G-SFP series: the same 12-port Layer 2 managed PoE+ switch with eight 30 W ports and four SFP slots, rated -40 °C to 75 °C. It suits unheated outdoor cabinets on utility, oil and gas and ITS networks.

  • -40 °C to 75 °C Operation: The extended temperature rating keeps PoE and ring traffic running in unheated outdoor cabinets through winter cold and summer heat.
  • Eight 30 W PoE+ Ports: Eight 10/100/1000 RJ45 ports to IEEE 802.3at/af supply up to 30 W each to cameras and other powered devices.
  • Four Dual-Rate SFP Slots: Four 100/1000 SFP slots take single-mode or multi-mode modules for fibre uplinks over distance or through electrical noise.
  • G.8032 Ring Under 50 ms: ITU-T G.8032 ERPS restores a broken ring in under 50 ms, with STP, RSTP and MSTP also supported.
  • Hazardous Location Approvals: Antaira lists UL Class 1 Division 2, ATEX Zone 2, UL 61010-1 and NEMA TS2 certifications, with FCC and CE marks.
Thermal Dissipation: FanlessFanless
Operating Temperature: Extended TemperatureExtended Temp
Certification: ATEX Zone 2ATEX Zone 2
Certification: CECE
Certification: FCCFCC
Certification: UL Class 1 Division 2UL Class 1 Division 2
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Overview
  • Specifications
  • Downloads

LMP-1204G-SFP-T Overview

Outdoor cabinets on ITS, oil and gas and utility networks are rarely heated, so the switch inside has to start and run through hard frost and summer sun while it powers devices and holds the ring together. The LMP-1204G-SFP-T is the extended temperature model in the Antaira LMP-1204G-SFP series, a 12-port Layer 2 managed industrial PoE+ switch rated -40 °C to 75 °C.

It carries eight 10/100/1000 RJ45 ports with IEEE 802.3at/af PoE+ at up to 30 W per port and four 100/1000 dual-rate SFP slots for single-mode or multi-mode fibre, with reach set by the module fitted. Store-and-forward switching runs on a 24 Gbps fabric with an 8K MAC table and 9.6K jumbo frames. ITU-T G.8032 ERPS brings a broken ring back in under 50 ms, and STP, RSTP, MSTP, LACP, 802.1Q VLANs, QoS, IGMP and Modbus TCP cover the rest of the Layer 2 toolset.

Redundant 48 to 55 V DC inputs land on a removable 6-contact terminal block, protected against overload current and reverse polarity. The PoE ping alarm restarts a port whose device has stopped responding, which can save a site visit to a remote camera, and a relay output and e-mail alerts flag faults. 802.1X, SNMPv3, HTTPS and SSH secure management from the web console, Telnet or CLI.

The LMP-1204G-SFP-T sits in an IP30 metal case for DIN-rail or optional wall mounting. Antaira lists FCC, CE, UL 61010-1, UL Class 1 Division 2, NEMA TS2 and ATEX Zone 2 approvals and backs it with its 5-year warranty. The LMP-1204G-SFP is the standard temperature model for heated cabinets, and the LMP-1204G-SFP-bt-T adds 90 W 802.3bt ports at the same rating. We supply and specify the switch, and pre-configure IP addressing, VLANs and ring settings where you ask.

LMP-1204G-SFP-T Specifications

Overview
Brand & ModelAntaira LMP-1204G-SFP-T
FeaturesFanless
Industrial
Managed Ethernet Switch
Networking
Switching LayerLayer 2
Switch TypeManaged
Ethernet Ports8x 10/100/1000 BASE-TX [PoE+] [RJ45]
Number of Ethernet Ports8x Ethernet Ports
PoE StandardPoE+ 30W [802.3at]
Number of Fiber Ports4x 100/1000 [SFP]
Networking StandardsIEEE 802.1AB LLDP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1X Port-Based Network Access Control
IEEE 802.3 10BaseTx Ethernet
IEEE 802.3ab 1000BaseTx Gigabit Ethernet
IEEE 802.3ad Link Aggregation
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3u 100BaseTx Fast Ethernet
IEEE 802.3x Back Pressure Flow Control
IEEE 802.3z Gigabit Fiber
ITU-T G.8032 ERPS
Power
Power Input48-55V DC, Terminal Block
Environmental Conditions
Operating Temperature-40°C to 75°C [-40°F to 167°F]
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Humidity5% - 95% (Non-condensing)
Ingress ProtectionIP30
ShockIEC 60068-2-27
VibrationIEC 60068-2-6
CertificationATEX Zone 2
CE
FCC
NEMA TS2
RoHS
UL 61010-1
UL Class 1 Division 2
Mechanical Properties
Weight1.1 Kg (2.5 Lbs)
Dimensions54mm x 142mm x 99mm (2.13" x 5.59" x 3.9")
Mounting OptionsDIN Mount
Wall Mount

Official Antaira UK Distributor

Things Embedded is an official Antaira UK distributor, and we supply the LMP-1204G-SFP-T with matching SFP transceivers and a DIN-rail power supply, with IP addressing, VLANs and ring settings pre-configured on request. Within the Antaira range, the LMP-1204G-SFP standard temperature build rated -10 °C to 70 °C for heated or indoor cabinets.

Across our range, the LMP-1204G-SFP-T sits with our PoE switches for industrial sites, managed industrial switches and industrial Ethernet switches.

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.