Skip to main content
Loading...

Antaira LMP-2602G-SFP-T 26-Port Gigabit Managed Rackmount Industrial Switch with 24x PoE+ (720W), 2x SFP and -40 to 75 °C

The LMP-2602G-SFP-T is the extended temperature build of the Antaira LMP-2602G-SFP series: a 26-port managed rack switch with 24 PoE+ ports on a 720 W budget and two gigabit combo ports, each usable as RJ45 or SFP, rated -40 °C to 75 °C, for unheated equipment rooms.

  • -40 °C to 75 °C Operation: The extended temperature rating keeps all 24 PoE+ ports running in unheated equipment rooms and shelters through the year.
  • 24 Full-Power PoE+ Ports: Twenty-four 10/100/1000 RJ45 ports to IEEE 802.3at/af, with a 720 W budget that covers every port at 30 W.
  • Two Gigabit Combo Ports: Two gigabit combo ports, each usable as RJ45 or SFP, take copper or single-mode and multi-mode fibre uplinks.
  • 19-Inch Rack Mounting: Mounts in a standard 19-inch rack in an IP40 metal case, with all PoE ports in one place for patching.
  • Layer 2 Managed With G.8032: 802.1Q VLANs, 802.1p QoS, IGMP, LACP, LLDP and 802.1X, with G.8032 ERPS and STP, RSTP, MSTP redundancy.
Operating Temperature: Extended TemperatureExtended Temp
Certification: CECE
Certification: FCCFCC
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Overview
  • Specifications
  • Downloads

LMP-2602G-SFP-T Overview

Network racks in outlying buildings and equipment shelters are often unheated, yet a 19-inch rack there may have to power two dozen cameras or devices. The LMP-2602G-SFP-T is the extended temperature model in the Antaira LMP-2602G-SFP series, a 26-port managed industrial PoE+ switch for the rack, rated -40 °C to 75 °C.

Twenty-four 10/100/1000 RJ45 ports support IEEE 802.3at/af PoE+ at up to 30 W per port, and the 720 W budget is enough to run all 24 at full power. Two gigabit combo ports, each usable as RJ45 or SFP, take a copper uplink or a 100/1000 single-mode or multi-mode fibre module. Store-and-forward switching runs on a 52 Gbps fabric with an 8K MAC table and 9.6K jumbo frames.

Management is Layer 2: 802.1Q VLANs, 802.1p QoS, IGMP v1/v2, LACP link aggregation, LLDP and 802.1X authentication, with SNMP v1/v2c/v3, RMON and Syslog for monitoring. Ring redundancy uses ITU-T G.8032 ERPS, with STP, RSTP and MSTP also supported. Redundant 48 to 55 V DC inputs land on a removable 8-contact terminal block with slow-blow fuse overload and reverse polarity protection, and a built-in relay output warns of a power failure. The switch draws 21 W itself.

The LMP-2602G-SFP-T runs in an IP40 metal case for a 19-inch rack. Antaira lists FCC, CE and UL 61010-1 approvals and covers it with its 5-year warranty. The LMP-2602G-SFP is the -10 °C to 65 °C model, and the LNP-2602G-SFP-T keeps the same ports unmanaged at this rating. We supply and specify the switch, and can pre-configure IP addressing, VLANs and ring settings on request.

LMP-2602G-SFP-T Specifications

Overview
Brand & ModelAntaira LMP-2602G-SFP-T
FeaturesIndustrial
Managed Ethernet Switch
Networking
Switching LayerLayer 2
Switch TypeManaged
Ethernet Ports24x 10/100/1000 BASE-TX [PoE+] [RJ45]
2x 10/100/1000 BASE-TX [RJ45]
Number of Ethernet Ports26x Ethernet Ports
PoE StandardPoE+ 30W [802.3at]
PoE Power Budget720W
Number of Fiber Ports2x 100/1000 [SFP]
Networking StandardsIEEE 802.1AB LLDP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1X Port-Based Network Access Control
IEEE 802.3 10BaseTx Ethernet
IEEE 802.3ab 1000BaseTx Gigabit Ethernet
IEEE 802.3ad Link Aggregation
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3u 100BaseTx Fast Ethernet
IEEE 802.3x Back Pressure Flow Control
IEEE 802.3z Gigabit Fiber
ITU-T G.8032 ERPS
Power
Power Input48-55V DC, Terminal Block
Environmental Conditions
Operating Temperature-40°C to 75°C [-40°F to 167°F]
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Humidity5% - 95% (Non-condensing)
Ingress ProtectionIP40
CertificationCE
FCC
UL 61010-1
Mechanical Properties
Weight2.8 Kg (6.2 Lbs)
Dimensions440mm x 44mm x 200mm (17.32" x 1.73" x 7.87")
Mounting Options19" Rack Mount

Official Antaira UK Distributor

Things Embedded is an official Antaira UK distributor, and we supply the LMP-2602G-SFP-T with matching SFP transceivers and rack cabling, with IP addressing, VLANs and ring settings pre-configured on request. Within the Antaira range, the LMP-2602G-SFP standard temperature build rated -10 °C to 65 °C.

Across our range, the LMP-2602G-SFP-T sits with our 19-inch rack industrial switches, industrial PoE switches and managed industrial switches.

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.