Antaira LMP-2602G-SFP 26-Port Gigabit Managed Rackmount Industrial Switches with 24x PoE+ (720W), 2x SFP and Extended Temperature Options

Large camera and device networks often bring their cabling back to a rack in a control room or equipment shelter, and powering two dozen devices from DIN-rail switches there means several boxes, several power feeds and more to configure. The Antaira LMP-2602G-SFP series puts 24 full-power PoE+ ports in one managed industrial switch for a 19-inch rack, with two combo uplinks for copper or fibre.

Every LMP-2602G-SFP has 24 10/100/1000 RJ45 ports with IEEE 802.3at/af PoE+ at up to 30 W each, and the 720 W budget covers all 24 at full power, so there is no need to ration PoE across the ports. Two gigabit combo ports, each usable as RJ45 or SFP, take a copper uplink or a 100/1000 single-mode or multi-mode module. Store-and-forward switching runs on a 52 Gbps fabric with an 8K MAC table and 9.6K jumbo frames. Layer 2 management covers 802.1Q VLANs, 802.1p QoS, IGMP v1/v2, LACP, LLDP and 802.1X, with SNMP v1/v2c/v3, RMON and Syslog, and redundancy uses ITU-T G.8032 ERPS with STP, RSTP and MSTP.

The series comes in two temperature grades. The LMP-2602G-SFP is the standard build, rated -10 °C to 65 °C for control rooms and heated equipment rooms. The LMP-2602G-SFP-T is the extended temperature build, rated -40 °C to 75 °C for unheated shelters and outbuildings. Within the Antaira range, the LMP-2804G-4XS series adds Layer 3 routing and four 10G SFP+ uplinks to 24 PoE+ ports, the LNP-2602G-SFP series keeps the ports unmanaged, and the LMX-2602G-SFP series offers the same layout without PoE.

Power comes in on redundant 48 to 55 V DC inputs through a removable 8-contact terminal block, with slow-blow fuse overload protection, reverse polarity protection and a built-in relay output that warns of a power failure. The switch draws 21 W. Both LMP-2602G-SFP models sit in an IP40 metal case for a 19-inch rack and carry Antaira’s 5-year warranty, with FCC, CE and UL 61010-1 approvals. Antaira names power and utility, water treatment, oil and gas, factory automation, security surveillance and ITS as target networks, and the series suits the rack where those networks gather their PoE devices.