Skip to main content

Antaira LMX-0501G-SFP-V2 5-Port Gigabit Managed Industrial Ethernet Switches with 1x SFP and Extended Temperature Options

The Antaira LMX-0501G-SFP-V2 series is a family of five-port managed industrial Ethernet switches with four 10/100/1000 RJ45 ports and one 100/1000 SFP slot, G.8032 ERPS ring recovery under 50 ms, Modbus TCP, static routes between VLANs and redundant 12 to 48 V DC input in an IP30 DIN rail case. The LMX-0501G-SFP-V2 series suits power and utility, water, oil and gas, factory automation and ITS cabinets.

  • Four Gigabit RJ45 Plus One SFP: Four 10/100/1000 RJ45 ports and one 100/1000 SFP slot for a fibre uplink over distance or through electrical noise.
  • G.8032 ERPS Ring Recovery: ITU-T G.8032 ERPS recovers a ring in under 50 ms, with STP, RSTP and MSTP for other topologies.
  • Modbus TCP and 802.1X: Modbus TCP for SCADA monitoring and 802.1X, HTTPS and SSH for access control, with static routes between VLANs.
  • Redundant 12 to 48 V DC Input: Dual DC inputs on a 6-contact terminal block with reverse polarity and overload protection and a 7.5 W draw.
  • Two Temperature Grades: Standard -10 °C to 70 °C or extended -40 °C to 75 °C, both in an IP30 metal DIN rail case.
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Description
  • Compare Variants
  • Downloads
UK Support Team: +44 (0)1785 558 300

LMX-0501G-SFP-V2 Description

Copper Ethernet runs out at 100 m and picks up interference near drives and power cables, so the link from a remote cabinet back to the control room is often fibre. A managed switch at that cabinet also gives the SCADA team VLANs, ring protection and something to poll. The Antaira LMX-0501G-SFP-V2 series combines both: four managed gigabit copper ports and one SFP slot for the fibre uplink, in an IP30 metal case for a DIN rail.

Both models share the same Version 2 hardware. The four 10/100/1000Base-T(X) RJ45 ports support auto MDI/MDI-X, and the SFP slot takes a 100 or 1000 Mbps transceiver, so the fibre type and reach follow the module chosen. Switching is store-and-forward on a 10 Gbps fabric with an 8K MAC table and 9.6 KB jumbo frames. The Layer 2+ firmware covers IEEE 802.1Q VLANs, QoS, IGMP snooping for up to 1024 groups, LACP, SNMP v1/v2c/v3, RMON, Modbus TCP and 802.1X, and adds static routes between VLANs with DHCP Option 82. ITU-T G.8032 ERPS recovers a ring in under 50 ms, with STP, RSTP and MSTP available.

There are two temperature grades. The LMX-0501G-SFP-V2 is the standard build, rated -10 °C to 70 °C for heated or indoor cabinets. The LMX-0501G-SFP-T-V2 is the extended temperature build, rated -40 °C to 75 °C for unheated outdoor enclosures, pumping stations and roadside cabinets. For a fifth copper port, the Antaira LMX-0601G-SFP-V2 series follows the same design.

Antaira names power and utility, water and wastewater, oil, gas and mining, factory automation, security surveillance and ITS as typical applications. Each case is tested for shock to IEC 60068-2-27, vibration to IEC 60068-2-6 and free fall to IEC 60068-2-32, with storage from -40 °C to 85 °C and 5% to 95% non-condensing humidity. Redundant 12 to 48 V DC inputs land on a 6-contact terminal block with reverse polarity and overload protection, a 24 V DC relay contact and a 7.5 W draw, and high EFT and ESD protection is built in. The LMX-0501G-SFP-V2 series carries FCC and CE marks, is RoHS compliant and comes with Antaira’s 5-year warranty, and we can pre-configure IP addressing, VLANs and ring settings before it ships.

LMX-0501G-SFP-V2 Specifications

Overview
Brand & ModelAntaira LMX-0501G-SFP-V2
FeaturesFanless
Industrial
Managed Ethernet Switch
Networking
Switching LayerLayer 2+
Switch TypeManaged
Ethernet Ports4x 10/100/1000 BASE-TX [RJ45]
Number of Ethernet Ports4x Ethernet Ports
Number of Fiber Ports1x 100/1000 [SFP]
Networking StandardsIEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1X Port-Based Network Access Control
IEEE 802.3 10BaseTx Ethernet
IEEE 802.3ab 1000BaseTx Gigabit Ethernet
IEEE 802.3ad Link Aggregation
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3u 100BaseTx Fast Ethernet
IEEE 802.3x Back Pressure Flow Control
IEEE 802.3z Gigabit Fiber
ITU-T G.8032 ERPS
Power
Power Input12-48V DC, Terminal Block
Environmental Conditions
Operating TemperatureSee Variant Specifications
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Humidity5% - 95% (Non-condensing)
Ingress ProtectionIP30
ShockIEC 60068-2-27
VibrationIEC 60068-2-6
CertificationCE
FCC
RoHS
Mechanical Properties
Weight0.9 Kg (1.9 Lbs)
Dimensions54mm x 142mm x 99mm (2.13" x 5.59" x 3.9")
Mounting OptionsDIN Mount
Wall Mount

LMX-0501G-SFP-V2 Variants

Antaira LMX-0501G-SFP-T-V2 5-Port Gigabit Managed Industrial Ethernet Switch with 1x SFP and Extended Temperature

LMX-0501G-SFP-T-V2 with 4x Gigabit RJ45, 1x SFP, G.8032 ERPS and -40 to 75 °C

View
Overview
Brand & ModelAntaira LMX-0501G-SFP-T-V2
Environmental Conditions
Operating Temperature-40°C to 75°C [-40°F to 167°F], Extended Temperature

Antaira LMX-0501G-SFP-V2 5-Port Gigabit Managed Industrial Ethernet Switch with 1x SFP

LMX-0501G-SFP-V2 with 4x Gigabit RJ45, 1x SFP, G.8032 ERPS and 12-48 V DC input

View
Overview
Brand & ModelAntaira LMX-0501G-SFP-V2
Environmental Conditions
Operating Temperature-10°C to 70°C [14°F to 158°F], Extended Temperature

No related media available for this product series.

Official Antaira UK Distributor

Things Embedded is an official Antaira UK distributor, supplying the LMX-0501G-SFP-V2 series for UK utility, water, oil and gas and factory automation programmes. Within the Antaira range, the LMX-0601G-SFP-V2 adds a fifth gigabit copper port, and the LMX-0500-V2 offers five Fast Ethernet ports where no fibre is needed.

The LMX-0501G-SFP-V2 series sits among our managed industrial switches, our industrial Ethernet switches for cabinets and DIN rail and our full Ethernet switch range. Where a cabinet needs four managed gigabit ports and a single fibre uplink, this is the Antaira series to specify. If you share the device list, fibre routes and cabinet conditions, our engineers can suggest the right model and set up IP addressing, VLANs and ring settings before the switch leaves us.

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.