Skip to main content
Loading...

AVerMedia D115WOXB NVIDIA Jetson Orin NX Rugged Fanless PC with Dual GbE, PoE Options and -25 to 60 °C

The D115WOXB is the Orin NX box in the AVerMedia D115W series, built on the second-generation D115W board with 4-lane camera inputs, optional PoE on one port and -25 °C to 60 °C operation. It suits roadside, retail and security edge AI in unheated cabinets, where a 9-24 V DC supply and fanless cooling matter.

  • -25 to 60 °C Fanless Operation: Rated from -25 °C to 60 °C with no fan, so it suits unheated roadside cabinets and enclosures with no maintenance access.
  • Jetson Orin NX 16GB or 8GB: An NVIDIA Jetson Orin NX module in 16GB or 8GB form, rated at up to 100 TOPS or 70 TOPS.
  • Two 4-Lane MIPI CSI-2 Inputs: Two internal 22-pin MIPI CSI-2 connectors with four lanes each, for higher-resolution embedded cameras than the original D115.
  • Dual GbE with Optional PoE: Two GbE RJ45 ports, with optional PoE on Ethernet 1 to power a camera or sensor over the network cable.
  • 9-24 V DC and CAN Header: Wide 9-24 V DC input by jack or 4-pin header, plus CAN, two UARTs, two I2C buses and four GPIO lines.
Operating Software: LinuxLinux
USB Generation: USB3USB3
M.2: 22x M.2
Connectivity: WirelessWi-Fi
 NVMe: NVMe SSD SupportNVMe SSD
Thermal Dissipation: FanlessFanless
Operating Temperature: Extended TemperatureExtended Temp
Certification: CECE
Certification: FCCFCC
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Overview
  • Specifications
  • Downloads

D115WOXB Overview

Roadside cabinets, shop ceilings and security enclosures are rarely heated, and a winter night can take them well below freezing. The AVerMedia D115WOXB is a rugged fanless PC that keeps a Jetson Orin NX running from -25 °C to 60 °C, and it is the Orin NX box in the D115W series. It is built on the D115W carrier board; the D115WONB is the same box with an Orin Nano, and the D115WOXB-1 adds out-of-band management and optional 4G/5G.

The D115WOXB is supplied with a Jetson Orin NX 16GB or 8GB module, rated by NVIDIA at up to 100 TOPS and 70 TOPS respectively, enough for multi-stream detection, tracking or classification at the edge. Two internal MIPI CSI-2 connectors with four lanes each, on 22-pin FPCs, give embedded cameras more bandwidth than the 2-lane inputs on the original D115. AVerMedia publishes board support packages for JetPack 5 and JetPack 6.2, on Ubuntu 20.04 and 22.04.

Two GbE RJ45 ports handle cameras and uplink, and Ethernet 1 can take an optional PoE board to power a camera or sensor over the same cable. One HDMI output drives a 4K display at 60 Hz, and three USB 3.2 Gen 2 Type-A ports include one inside the enclosure. A 256GB NVMe SSD fills the M.2 M-key 2280 socket, an M.2 E-key 2230 socket takes an optional Wi-Fi and Bluetooth card, and the 20-pin terminal-block header carries CAN, two UARTs, two I2C buses and four GPIO lines. Recovery is over USB-C.

The D115WOXB runs fanless from -25 °C to 60 °C, with storage from -40 °C to 85 °C and up to 95% humidity at 40 °C, non-condensing. Power is 9-24 V DC through a DC jack or a 4-pin ATX header, and AVerMedia lists CE, FCC and KC marks. We supply it with the Orin NX module fitted, JetPack flashed and the SSD installed, with any optional PoE board, Wi-Fi card and antennas fitted and tested before it ships.

D115WOXB Specifications

Overview
Brand & ModelAVerMedia D115WOXB
FeaturesCompact
Embedded
Fanless
GPU
Industrial
Performance
AI Performance70–100 TOPS
Memory16GB Soldered On-board
8GB Soldered On-board
System-on-ModuleNVIDIA Jetson Orin NX 16GB: 100 TOPS, 1024-core Ampere GPU with 32 Tensor Cores, 8-core Arm Cortex-A78AE 2.0GHz, 16GB 128-bit LPDDR5, 10-25W
NVIDIA Jetson Orin NX 8GB: 70 TOPS, 1024-core Ampere GPU with 32 Tensor Cores, 6-core Arm Cortex-A78AE 2.0GHz, 8GB 128-bit LPDDR5, 10-20W
Operating SystemLinux
Linux Ubuntu 20.04
Linux Ubuntu 22.04
Jetpack VersionJetPack 6.2
JetPack 5
Graphics
Multi Display SupportSingle Display Support
Display Outputs1x HDMI
I/O
Ethernet2x Ethernet Ports
2x GbE LAN [RJ45]
Optional PoE Modules
USB3x USB Ports
3x USB 3.2 Gen 2 [Type A]
CANbus1x CANbus Ports
1x CANbus [Terminal Block]
GPIOGPIO [4-lines]
MIPI Interface2x 4 Lane MIPI CSI-2
Expansion
M.22x M.2 Expansion Slots
1x M.2 E-Key [2230]
1x M.2 M-Key [PCIe] [2280]
Wireless ConnectivityOptional WiFi/Bluetooth
Storage
Storage1x M.2 SSD
NVMeNVMe SSD Support
Power
Power Input9-24V DC [4-Pin]
9-24V DC [Barrel Connector]
Environmental Conditions
Thermal DissipationFanless Passively Cooled Chassis
Operating Temperature-25°C to 60°C [-13°F to 140°F]
Storage Temperature-40°C to 85°C [-40°F to 185°F]
CertificationCE
FCC
KC
Mechanical Properties
Weight1.0 Kg (2.2 Lbs)
Dimensions126mm x 96mm x 74mm (4.96" x 3.78" x 2.91")

AVerMedia Edge AI Systems in the UK

Things Embedded supplies the AVerMedia D115WOXB in the UK, and we supply the D115WOXB with JetPack flashed, the module and storage fitted and the unit tested before it ships. Within the AVerMedia range, the D115OXB uses the original D115 board with 2-lane camera inputs and a 0 °C to 60 °C rating, and you can compare every model on our AVerMedia Jetson computers page.

For alternatives from our own range, see our rugged NVIDIA Jetson computers and edge AI computers.

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.