DFI ADS103-R680IB Intel 14th Gen Core Thin Mini-ITX SBC with R680E Chipset, Triple LAN and 15 to 36 V DC Input

A data collector that gathers readings from a machine network, a camera segment and the site uplink, and stores them locally before forwarding, needs both ports and memory it can trust. The ADS103-R680IB is the R680E build of the DFI ADS103 series with three Ethernet ports, joining ECC memory support to a 15 to 36 V DC input on a Thin Mini-ITX board of 170 x 170 mm.

The LGA1700 socket takes Intel Core Series 2 (Bartlett Lake-S), including P-core-only parts such as the 12-core Core 9 273PE, plus 12th, 13th and 14th Gen Core, Intel Processor 300, Pentium and Celeron, at up to 65 W TDP. Two DDR4 3200 MHz SO-DIMMs hold up to 64 GB with ECC support, and Intel vPro supports out-of-band management. Intel UHD Graphics runs two DP++ outputs at up to 4096 x 2304, internal LVDS or eDP, and an optional fourth display through DFI’s extension port.

The three Ethernet ports are one 2.5GbE on an Intel I226V and two GbE on Intel I210AT and I219LM controllers. Four USB 3.2 Gen 2 ports sit on the rear, two fewer than the DB builds, with two USB 3.2 Gen 1 and four USB 2.0 on internal headers. Two RS-232/422/485 ports and 8-bit DIO reach serial instruments and signals. NVMe runs at PCIe Gen4 x4 on the M.2 M-key, RAID 0, 1, 5 and 10 cover the M.2 and two SATA ports, and the PCIe x16 Gen5 slot supplies up to 75 W to a card.

The ADS103-R680IB runs from 15 to 36 V DC on a DC jack or 4-pin connector and operates from -5 to 65 °C, with CE, FCC, UKCA and RoHS compliance, TPM 2.0 and a watchdog. ADS103-R680DB swaps the third LAN port for six rear USB 3.2 Gen 2, and ADS103-H610IB offers three LAN ports on the H610E chipset without ECC or vPro.