Things Embedded are an official Diamond Systems UK distributor and can supply the JANUS-MM-LP.
The Janus-MM-4LP-XT family of I/O modules offers two or four opto-isolated CANbus 2.0B ports plus 16 digital I/O lines. Models are available in both the PC/104-Plus and PC/104 form factors. An FGPA core houses the CAN controller logic and digital I/O logic providing data rates up to 1Mbps. Each CAN port supports standard and extended frames as well as expanded TX and RX message queues for enhanced performance. Each port has its own combination isolator and transceiver chip.
Janus-MM-4LP-XT fits a wide variety of rugged and on-vehicle embedded serial I/O application needs. It was designed with harsh applications in mind including latching connectors to further improve reliability. Extended temperature operation of -40°C to +85°C is tested and guaranteed. The module is compatible with MIL-STD-202G shock and vibration specifications.
Diamond Systems offers cables for use with the Janus-MM-4LP-XT family of PC/104-Plus CANbus modules.
|Brand & Model
|Diamond Systems JANUS-MM-LP : JNMM-4LP-XT
|Quad Channel Isolated CAN Bus PC/104 Plus Module with 16-Channels Digital I/O
|Number of CAN ports
|2 or 4 CANbus 2.0B
|Up to 1Mbps
|ADM3053 isolation + transceiver
|500V port-to-port and port-to-host
|Standard 11-bit identifier
|Extended 29-bit identifier
|Expanded TX and RX message queues
|16 8-byte transmit message queues
|31 8-byte receive message queues
|Jumper selectable biased split termination
|Number of lines
|16 programmable DIO lines arranged in 2 8-bit ports
|3.3V or 5V, jumper selectable
|PCI or ISA, self selecting
|Latching connectors for increased ruggedness
|tbd W at 5VDC
|Operating System support
|Windows Embedded Standard 7
|Linux Ubuntu 12.04LTS
|-40ºC to +85°C (-40ºF to +185°F)
|5% to 95% non-condensing
|tbd hours at 20°C
|3.55″ x 3.775″ (90mm x 96mm)