EverFocus eNVP-JOX-IV-F4004 NVIDIA Jetson Orin NX Edge AI Box PC with 5x PoE LAN and PoE-PD Input

A junction or depot camera cluster usually needs a PoE switch, a power supply and a computer, each in its own enclosure. The eNVP-JOX-IV-F4004 folds those roles into one edge AI box PC from the EverFocus eNVP-JOX-IV series, with an NVIDIA Jetson Orin NX 16GB and five PoE outputs for cameras.

The Orin NX 16GB pairs a 8-core Arm Cortex-A78AE CPU with a 1024-core NVIDIA Ampere architecture GPU and 32 Tensor Cores, and the 16GB of 128-bit LPDDR5 is soldered onboard. EverFocus ships the eNVP-JOX-IV-F4004 with Linux and NVIDIA JetPack 5.1 and above, so detection and analytics models built with the NVIDIA tools can be deployed as they are. Storage is an M.2 M-Key 2280 NVMe slot, and an M.2 E-Key 2230 slot plus an M.2 B-Key 3042/3052 slot take Wi-Fi or the optional 4G LTE (Cat 1) module, with GPS also offered.

Networking is where the eNVP-JOX-IV-F4004 stands apart. Six Gigabit RJ45 ports are fitted: one accepts PoE-PD power at up to 60 W, one delivers 15 W PoE, and four more deliver PoE when the computer runs from its DC input, which EverFocus calls DC mode. Alongside sit two RS-485 ports on DB-9, two CAN bus ports on a terminal block, eight alarm I/O, four USB 3.1 Type-A ports and an HDMI 2.0 output, so cameras, controllers and a local display can all connect to one box. Power arrives on a 9 to 48 V DC terminal block with ignition management in 12, 24 and 48 V modes, so the edge AI box PC can start and shut down with a vehicle or a cabinet supply.

The eNVP-JOX-IV-F4004 runs from -20 to 60 °C at 10 to 95% humidity, non-condensing, with a maximum draw of 45 W before the PoE load. The 192 x 154.8 x 70.4 mm enclosure mounts on DIN rail, a wall or VESA, and NEMA TS2 is available as an option for traffic control cabinets. Where only one camera needs power, the eNVP-JOX-IV-F4000 keeps the PoE-PD input and single PoE port with the same Orin NX 16GB module.