IBOX-650P-IP66-01-JAO32 Overview
GMSL-2 cameras are common on vehicles and robots because they carry low-latency video over long cable runs. The Sintrones IBOX-650P-IP66-01-JAO32 brings that capture into a sealed enclosure: a member of the IBOX-650P-IP66 series that pairs the NVIDIA Jetson AGX Orin 32GB module with four GMSL-2 inputs in an IP66 outdoor PC.
The Jetson AGX Orin 32GB combines 1792 CUDA cores, an 8-core Arm Cortex-A78AE CPU and 32 GB of LPDDR5, which suits perception on up to four cameras with moderate model sizes. The VDB-101 camera board feeds four FAKRA-Z connectors, and Sintrones lists support for cameras from oToBrite, e-con Systems and StereoLabs, though BSP versions can vary by camera. The IBOX-650P-IP66-01-JAO64 offers the same camera set with the 64GB module.
Beside the cameras, the IBOX-650P-IP66-01-JAO32 has one 10GbE and two 2.5GbE ports on X-coded M12 connectors, with IEEE 802.3at PoE+ at up to 30 W on the 2.5GbE pair for IP cameras or LiDAR. Two CAN FD ports on M8 connect to vehicle buses, an M12 port handles RS-232/422/485, and two USB 3.2 ports and HDMI sit on IP67 connectors. Storage is the 64 GB eMMC with the BSP pre-installed plus an M.2 2280 NVMe slot, and M.2 Key B with Nano SIM, M.2 Key E and mPCIe slots take WWAN, Wi-Fi and GNSS modules.
Sealed to IP66 and cooled passively, the outdoor PC runs from -25 °C to 70 °C and is tested to MIL-STD-810H for vibration and shock. Sintrones lists E-Mark, ECE R118, EN 50155 and EN 45545-2 (R25), and the 9 to 60 V DC M12 input adds ignition detection with surge and reverse-polarity protection. The IBOX-650P-IP66-01-JAO32 suits camera-led work on rail vehicles, robots and outdoor sites.
IBOX-650P-IP66-01-JAO32 Specifications
| Overview | |
|---|---|
| Brand & Model | Sintrones IBOX-650P-IP66-01-JAO32 |
| Features | Embedded Fanless GPU Industrial M12 Connectors Rugged Waterproof |
| Performance | |
| AI Performance | 200 TOPS |
| System-on-Module | NVIDIA Jetson AGX Orin 32GB: 200 TOPS, 1792-core Ampere GPU with 56 Tensor Cores, 8-core Arm Cortex-A78AE 2.2GHz, 32GB 256-bit LPDDR5, 64GB eMMC, 15-40W |
| Graphics | |
| Display Outputs | 1x HDMI |
| I/O | |
| Ethernet | 3x Ethernet Ports |
| 1x 10 GbE LAN [M12] 2x 2.5 GbE LAN [M12] [PoE] | |
| USB | 2x USB Ports |
| 2x USB 3.2 Gen 2 [Type A] | |
| Serial | 1x Serial Ports |
| 1x RS232/422/485 [M12] | |
| CANbus | 2x CANbus Ports |
| 2x CANbus, M8 | |
| MIPI Interface | 4x GMSL Automotive Camera Inputs [FAKRA-Z] |
| Expansion | |
| M.2 | 2x M.2 Expansion Slots |
| 1x M.2 B-Key [USB] [3042/3052] 1x M.2 E-Key [USB] [2230] | |
| mPCIe | 1x mPCIe Slots |
| 1x mPCIe [USB] | |
| SIM Slots | 1x SIM Slots |
| Wireless Connectivity | Optional 4G Modem Optional 5G Modem Optional WiFi/Bluetooth |
| Storage | |
| Storage | 1x M.2 SSD |
| NVMe | NVMe SSD Support |
| Power | |
| Power Input | 9-60V DC Input [M12] |
| Power Support Modes | AT: PWR on Input ATX: Press Button to Power |
| Ignition Sensing | Supports Ignition Control |
| Environmental Conditions | |
| Thermal Dissipation | Fanless Passively Cooled Chassis |
| Operating Temperature | -25°C to 70°C [-13°F to 158°F] |
| Storage Temperature | -40°C to 80°C [-40°F to 176°F] |
| Humidity | 10-90% (Non-condensing) |
| Ingress Protection | IP66 IP66 [Dustproof, Protection against powerful water jets spraying from any direction] |
| Shock | MIL-STD-810G |
| Vibration | IEC 60068-2-64 MIL-STD-810G |
| Certification | CE E-Mark EN50155 FCC |
| Mechanical Properties | |
| Weight | 5 KG (11 LBS) |
| Dimensions | 300mm x 190mm x 78mm (11.81" x 7.48" x 3.07") |
Official Sintrones UK Distributor
Things Embedded is an official Sintrones UK distributor, and the Sintrones IBOX range includes several Jetson computers with GMSL-2 camera inputs. The IBOX-650P-T1 series pairs the same AGX Orin compute and camera board with 1000BASE-T1 for in-vehicle networks. The IBOX-602P-IP66 series offers Jetson Orin NX at IP66 with PoE and GMSL, and the IBOX-604-G2 series is a Jetson Orin NX and Orin Nano drone computer for lighter airborne payloads.
Across categories, the IBOX-650P-IP66-01-JAO32 sits with our waterproof box PCs built for open-air mounting. The Jetson module lists it among our rugged Jetson computers, and its two CAN FD ports place it with our Jetson CAN bus computers for vehicle and robot integration.
Consult. Design. Integrate.
Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.
Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.