Vecow EAC-6200-R08 NVIDIA Jetson Orin NX 8GB Machine Vision PC with 4x PoE+ LAN

Many inspection stations run one camera model on a handful of cameras, and paying for the largest module there adds cost without adding throughput. The EAC-6200-R08 keeps the four PoE+ camera ports with the 8GB Orin NX module. It is the 8GB machine vision PC in the Vecow EAC-6200 series.

The EAC-6200-R08 runs an NVIDIA Jetson Orin NX 8GB module with a 6-core Arm Cortex-A78AE CPU, a 1024-core NVIDIA Ampere GPU with 32 Tensor cores and one NVDLA engine, with 8 GB LPDDR5 memory. Against the 16GB build it trades memory and one deep-learning engine for a lower cost per node, which suits single-model inference. It ships with Linux and the NVIDIA JetPack SDK, and the module encodes HEVC at up to one 4K stream at 60 fps or six 1080p streams at 60 fps for recording or streaming results.

Networking on the EAC-6200-R08 is six GbE ports: two GbE LAN ports for the plant network and four IEEE 802.3at GbE PoE+ ports at 25.5 W each for cameras, all on RJ45 with optional X-coded M12 connectors. A CAN FD port joins one USB 3.1 Gen 2 and two USB 3.1 ports, two COM RS-232/422/485 ports, 7-bit GPIO, a digital display output, micro USB console and recovery ports, a micro SD slot and an M.2 Key M NVMe SSD, while two M.2 Key B sockets, an M.2 Key E socket and dual SIM sockets take 5G, 4G or Wi-Fi modules.

Power comes in on 9 V to 50 V DC through a terminal block, with 16-mode software ignition control and a remote switch for vehicle and robot installs. The 193 x 132 x 80 mm, 1.9 kg unit wall-mounts or takes an optional DIN-rail kit, and Vecow rates it from -20 °C to 70 °C in 15 W mode and -20 °C to 55 °C in 25 W mode, with MIL-STD-810G operating shock and vibration and EN 50155 and EN 50121-3-2 EMC listings. Where more models run at once, see the EAC-6200-R16.