Vecow EAC-6200 NVIDIA Jetson Orin NX Machine Vision PCs with PoE+

Camera-based inspection usually brings a computer, a PoE switch and a power supply into the same cabinet, and every extra box is another thing to wire and maintain. The Vecow EAC-6200 series folds the switch into the computer: machine vision PCs with four IEEE 802.3at GbE PoE+ ports built around the NVIDIA Jetson Orin NX module. Fewer boxes means fewer power supplies to fuse, fewer cables to route and fewer things to check when a line stops.

Both EAC-6200 models share one design. The Orin NX module brings a 1024-core NVIDIA Ampere GPU with 32 Tensor cores, Linux and the JetPack SDK, with HEVC encoding of up to one 4K stream at 60 fps. Beside the four PoE+ ports sit two GbE LAN ports, all on RJ45 with optional X-coded M12, plus a CAN FD port, two COM ports, three USB 3.1 ports, 7-bit GPIO and an M.2 NVMe SSD. Two M.2 Key B sockets, an M.2 Key E socket and dual SIM sockets take 5G, 4G or Wi-Fi. The display output drives a local HMI or inspection screen.

The two models differ by module. The EAC-6200-R16 carries the Orin NX 16GB with an 8-core Arm Cortex-A78AE CPU and two NVDLA engines, rated by Vecow at up to 100 TOPS, for cells running several models at once. The EAC-6200-R08 uses the Orin NX 8GB with a 6-core CPU and one NVDLA engine, a lower-cost fit for single-model inspection stations. Both run the same software image, so a project can start on one module and move to the other as the model count changes, without rewiring cameras or controls.

EAC-6200 machine vision PCs typically serve high-speed AOI, medical imaging and mobile robot vision. A 9 V to 50 V DC input with 16-mode software ignition control suits machine and vehicle power, and the 193 x 132 x 80 mm, 1.9 kg unit is rated from -20 °C to 70 °C in 15 W mode, with MIL-STD-810G operating shock and vibration and EN 50155 and EN 50121-3-2 EMC listings. Wall mounting is standard, with a DIN-rail kit optional, so the computer can sit on the machine frame close to its cameras.