Vecow ECX-4071R Intel Core Ultra Fanless AI Computer with Dual 10GbE SFP+ and 4x PoE+

When a dozen cameras feed one inspection station, the bottleneck is often the uplink rather than the processor. The ECX-4071R addresses that with two 10GbE SFP+ ports alongside four 2.5GbE PoE+ ports and two front-access SSD trays. It is the 10GbE fanless AI computer with removable storage in the Vecow ECX-4000 series.

Inside the ECX-4071R, Vecow uses Intel Core Ultra 200S processors (Arrow Lake-S) on the W880 chipset, from the 14-core Core Ultra 5 245 to the 24-core Core Ultra 9 285 in 65 W or 35 W versions. The integrated NPU and Xe LPG graphics deliver up to 36 TOPS, which suits OpenVINO inference for detection, classification and anomaly checks without a separate accelerator. Two DDR5 6400 MHz CSODIMM slots take up to 96 GB, with ECC as an option, and Intel vPro, TSN, TCC and TPM 2.0 support remote management, deterministic networking and hardware-based security.

Networking on the ECX-4071R is 2x 10GbE SFP+, five 2.5GbE ports with four PoE+, and one GbE, with each PoE+ port rated to 25.5 W under IEEE 802.3at. Two front-access SSD trays with software RAID 0 or 1 sit beside an M.2 Key M PCIe x4 slot. Six USB 3.2 Gen 2 ports, four RS-232/422/485 COM ports, 16 isolated DIO, two DisplayPort, HDMI 2.0 and DVI-I outputs, two M.2 Key B sockets and an M.2 Key E socket with two SIM slots for 5G, 4G or Wi-Fi complete the I/O.

The fanless 260 x 175 x 79 mm chassis is rated -40 °C to 55 °C across the ECX-4071 builds, runs on redundant 9-50 V DC inputs with 16-mode software ignition control, and carries EN 50155 and EN 50121-3-2 EMC listings. Where removable trays are not needed, the ECX-4071 keeps the same 10GbE and PoE+ networking.