Skip to main content
Loading...

Winmate R15L100-PTC3-POE 15″ PoE Powered PCAP Touch Monitor with XGA Display and Front IP65

The R15L100-PTC3-POE is Winmate's 15 inch PoE chassis monitor, running from one network cable and pairing a 1024 x 768 display with PCAP multi-touch and strengthened front glass behind a front IP65 bezel. It suits control rooms and monitoring stations that need a larger 4:3 screen without a local power supply.

  • PoE Powered: IEEE 802.3at (25 W) or 802.3af (15 W) powered device, so a PoE switch or injector supplies the monitor.
  • 15″ XGA Display: 1024 x 768 at 350 nits with 800:1 contrast, giving 4:3 HMI and SCADA software a larger working area.
  • PCAP Multi-Touch: Projected capacitive multi-touch over USB with strengthened front glass, plus protection glass and anti-glare coating as options.
  • Front IP65 Enclosure: Front IP65 sealing on a fanless plastic enclosure of 352.5 x 276.7 x 45 mm, mounted on VESA 75 or 100.
  • VGA, Optional HDMI: VGA input as standard with HDMI and twin speakers as options, set up through a seven-key OSD.
Touch Technology: PCAPPCAP
Ingress Protection: Front IP65Front IP65
Certification: CECE
Certification: FCCFCC
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Overview
  • Specifications
  • Downloads

R15L100-PTC3-POE Overview

Operators watching a process all shift need a screen big enough to show the whole line, and installers want to avoid pulling a new power circuit to put one there. The R15L100-PTC3-POE is Winmate’s 15 inch PoE chassis monitor, and it takes its power from the network cable that already reaches the workstation.

The 15 inch 4:3 LCD runs at 1024 x 768 with 350 nits brightness, 800:1 contrast and an active area of 304.1 x 228.1 mm, which gives 4:3 HMI and SCADA software more room than the 10.4 and 12.1 inch versions. Projected capacitive multi-touch reports over USB, the front uses strengthened glass, and protection glass and an anti-glare coating are both offered as options.

Power arrives over the LAN port from any PoE switch or injector, as an IEEE 802.3at (25 W) or 802.3af (15 W) powered device, so one network cable replaces a local power supply. Video comes in over VGA as standard, with HDMI and a pair of speakers listed as options, and seven front keys drive the on-screen menu. For a brighter 4:3 panel in a metal chassis, the R12L100-PCM2-POE offers 500 nits at 12.1 inches, and the W15L100-PTA3-POE is the 15.6 inch widescreen version.

The fanless plastic enclosure measures 352.5 x 276.7 x 45 mm and has a front IP65 rating against dust and splashes. It mounts on 75 x 75 or 100 x 100 mm VESA and operates from 0 to 50 °C at 10 to 90% humidity. The monitor carries CE and FCC marks, and Winmate names industrial visualisation, control rooms and equipment monitoring as typical uses.

R15L100-PTC3-POE Specifications

Overview
Brand & ModelWinmate R15L100-PTC3-POE
FeaturesPoE Powered
Display
Display15"[4:3, 1024 x 768, XGA]
Touch InterfaceEthernet
USB
Touch ControllerMulti Touch PCAP
Brightness350 Nits
Viewing AngleWide Viewing Angle
160° Horizontal, 150° Vertical
Aspect Ratio4:3
FormatStandard
Contrast800:1
Number of Display Inputs3x Display Ports
Video Inputs1x Ethernet Input
1x Optional HDMI Input
1x VGA Input
Power
Power InputPoE Powered Device (PD) [RJ45]
Environmental Conditions
Operating Temperature0°C to 50°C [32°F to 122°F]
Storage Temperature-10°C to 60°C [14°F to 140°F]
Humidity10-90% (Non-condensing)
Ingress ProtectionFront IP65
Front IP65 [Dustproof, Protection against low pressure water jets spraying from the front side]
CertificationCE
FCC
Mechanical Properties
Dimensions353mm x 277mm x 45mm (13.9" x 10.91" x 1.77")

Official Winmate UK Distributor

Things Embedded is an official Winmate UK distributor, supplying the R15L100-PTC3-POE configured for UK industrial display projects. Within the Winmate range the W15L100-PTA3-POE offers the same PoE design as a 15.6 inch widescreen, and the R15L100-POC3 is a 15 inch 4:3 model for sites with local power.

With a 15 inch 4:3 panel the R15L100-PTC3-POE sits among our 15 inch touch screen monitors, our Power over Ethernet monitors and our front IP65 monitors. Where a larger 4:3 screen must run from the network, this is the model to specify.

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.