Skip to main content
Loading...

Yuan HDMI2.0 to Dante AV Ultra HDMI 2.0 Dante AV Encoder with Dante AV Ultra, 8-Channel Audio and PoE at 4K60

The HDMI2.0 to Dante AV Ultra is Yuan's HDMI 2.0 Dante AV encoder, putting a 4096x2160p60 HDMI source and up to eight channels of 24-bit audio onto a Dante AV Ultra network over gigabit Ethernet. It runs from PoE or 7.5 to 15V DC. It suits cameras, media players and lecterns feeding a Dante AV system.

  • HDMI 2.0 to Dante AV Ultra: Takes one HDMI 2.0 input at up to 4096x2160p60 and sends it as Dante AV Ultra over a gigabit RJ45 port.
  • Eight-Channel Audio: HDMI audio at eight channels, 24-bit and 32 to 192kHz, plus a stereo analogue input, goes out as Dante audio.
  • Wide Resolution Range: Accepts from 4096x2160 and 3840x2160 at 60fps down to 1080p, 720p, PC modes and 480i or 576i.
  • Web Control and USB: A web interface handles setup and firmware updates, and a USB 2.0 Type-B port connects to a PC.
  • PoE or 7.5 to 15V DC: Runs from PoE on the network port or a 7.5 to 15V DC input, so one cable can serve a source position.
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Overview
  • Specifications

HDMI2.0 to Dante AV Ultra Overview

Getting an HDMI source onto a Dante network lets video follow the same routing and control as the audio. The Yuan HDMI2.0 to Dante AV Ultra is the sending end of that link: an HDMI 2.0 Dante AV encoder that turns a camera, media player or presentation PC into a Dante AV Ultra source, which can suit pro AV installs in venues, lecture theatres and corporate spaces.

Input is one HDMI 2.0 port from 4096×2160 and 3840×2160 at 60fps down to 1080p, 720p, PC modes and 480i or 576i, with a stereo analogue audio input. HDMI audio is taken as up to eight channels of 24-bit audio at 32 to 192kHz, and the analogue input as two channels at 48kHz. The HDMI2.0 to Dante AV Ultra sends video and up to eight audio channels as Dante AV Ultra on one gigabit RJ45 port, and supports Dante AV Ultra only.

A web interface covers setup and firmware updates, with an LED indicator and DHCP, and a USB 2.0 Type-B port connects to a PC. Power comes from PoE or a 7.5 to 15V DC input. The matching receiver is the Dante AV Ultra to HDMI2.0, and where NDI, SRT or RTSP is needed with an optional Dante AV-H licence the SC6F0N1 HDMI2.0+ is an HDMI 2.0 encoder with a wider protocol list.

Plan Dante subscriptions and switch settings before installation, as they decide how sources reach each display. We supply the HDMI2.0 to Dante AV Ultra configured and tested with the sources, receivers and network it will connect to.

HDMI2.0 to Dante AV Ultra Specifications

Overview
Brand & ModelYuan HDMI2.0 to Dante AV Ultra
FeaturesPoE Powered
I/O
Ethernet1x Ethernet Ports
1x GbE LAN [RJ45] [PoE-PD]
USB1x USB Ports
1x USB 2.0 [Type B]
Video Capture
Simultaneous Video Inputs1
Video Input1x HDMI2.0
Video Resolution Input4K60 [4096×2160p @ 60/50fps]
Video Output1x RJ45 (1G)
Recording ModeHardware Compression
Streaming ProtocolsDante AV Ultra
Audio Input1x 3.5mm Audio Input
1x HDMI Embedded Audio Input
Power
Power Input7.5-15V DC
PoE Powered Device (PD) [RJ45]

Official Yuan UK Distributor

Things Embedded is an official Yuan UK distributor, and we supply the HDMI2.0 to Dante AV Ultra configured and tested with the sources, displays and network it will connect to. Within the Yuan range, the Dante AV Ultra to HDMI2.0 is the receiver that turns this stream back into HDMI 2.0, and the SC6G0N1 HDMI2.0 to IP/UVC V2 encodes HDMI 2.0 to SRT, RTSP, NDI and Dante AV-H with a USB UVC output.

Across our range, the HDMI2.0 to Dante AV Ultra sits with our Dante AV encoders and decoders, our AV over IP and our video encoders and decoders.

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.