Skip to main content
Loading...

Yuan SC6E0N1 HDMI to IP/UVC V2 HDMI Streaming Encoder with USB UVC Output and PoE at 1080p60

The SC6E0N1 HDMI to IP/UVC V2 is Yuan's HDMI streaming encoder for 1080p60 sources, sending the picture to the network and to a USB UVC output at the same time. It lists Full NDI, optional licensed NDI HX and Dante AV-H, RTSP, RTMP, HLS, TS and SRT. It suits lecterns, meeting rooms and cameras where PoE power is easiest.

  • HDMI to Network and USB: One HDMI input feeds both a gigabit network stream and a USB 3.0 Type-B UVC output that a PC sees as a webcam.
  • 1080p60 Encoding: Encodes from 1920x1080 at 60fps down to 720p and PC modes to 640x480, using H.264 Baseline, Main and High profiles.
  • NDI and Dante AV-H Options: Full NDI is listed, with NDI HX and Dante AV-H as optional protocols that need a licence.
  • Streaming Protocols: RTSP, RTMP, HLS, TS over UDP and SRT cover streaming services, players and contribution links over the open internet.
  • PoE or 12V DC Power: Runs from PoE on the RJ45 port or a 12V DC input, in a small enclosure with mounting flanges.
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Overview
  • Specifications

SC6E0N1 HDMI to IP/UVC V2 Overview

Many HDMI sources, from presentation PCs to compact cameras, only need to reach the network at 1080p. The Yuan SC6E0N1 HDMI to IP/UVC V2 is a small HDMI streaming encoder for that job, publishing the source as a network stream and presenting it to a PC as a USB UVC device, which can make it easier to bring an HDMI camera into conferencing or capture software.

It takes one HDMI input at up to 1920×1080 at 60fps, with 1080i, 720p and PC modes down to 640×480, and encodes H.264 at Baseline, Main or High profile with AAC-LC audio. Outputs are the gigabit RJ45 port and a USB 3.0 Type-B UVC port. The SC6E0N1 HDMI to IP/UVC V2 lists Full NDI, with NDI HX and Dante AV-H as optional licensed protocols, plus RTSP, RTMP, HLS, TS over UDP and SRT.

Configuration is through a web interface with upgradable firmware and DHCP. Power comes from PoE or a 12V DC input, so one cable can often serve a lectern or ceiling position. The SC6E0N1 IP/UVC to HDMI2.0 V2 is the matching decoder at the display end, and the SC6G0N1 HDMI2.0 to IP/UVC V2 is the step up when the source is 4K60.

Because the network stream and the UVC output run together, one source can reach a remote room and a local capture PC from the same encoder. Confirm which protocol the receiving end expects before choosing licences. We supply the SC6E0N1 HDMI to IP/UVC V2 configured and tested with the sources, displays and network it will connect to, with encoder settings matched to the decoder or service it feeds.

SC6E0N1 HDMI to IP/UVC V2 Specifications

Overview
Brand & ModelYuan SC6E0N1 HDMI to IP/UVC V2
FeaturesPoE Powered
I/O
Ethernet1x Ethernet Ports
1x GbE LAN [RJ45] [PoE-PD]
Video Capture
Host InterfaceUSB3.0
Simultaneous Video Inputs1
Video Input1x HDMI
Video Resolution InputHD60 [1920x1080p @ 60/50fps]
Video Output1x RJ45 (1G)
Video Resolution OutputHD60 [1920x1080p @ 60/50fps]
Recording ModeHardware Compression
Video CodecH.264
Streaming ProtocolsDante AV-H
HLS
NDI
NDI HX
RTMP
RTSP
SRT
TS over IP
UVC
Power
Power Input12V DC [Barrel Connector]
PoE Powered Device (PD) [RJ45]

Official Yuan UK Distributor

Things Embedded is an official Yuan UK distributor, and we supply the SC6E0N1 HDMI to IP/UVC V2 configured and tested with the sources, displays and network it will connect to. Within the Yuan range, the SC6G0N1 HDMI2.0 to IP/UVC V2 does the same HDMI to network and UVC job at 3840x2160p60, and the SC6E0N1 IP/UVC to HDMI2.0 V2 is the decoder that turns the stream back into HDMI.

Across our range, the SC6E0N1 HDMI to IP/UVC V2 sits with our video encoders and decoders, our AV over IP and our NDI encoders and decoders.

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.