Skip to main content
Contact Us
Antaira

Antaira LMP-C602G-SFP-bt-T-V2 6-Port Compact Gigabit Managed PoE++ Switch with 4x PoE++ (240W), 2x SFP and Extended Temperature

The LMP-C602G-SFP-bt-T-V2 is the extended temperature build of the Antaira LMP-C602G-SFP-bt-V2 series: a six-port managed gigabit switch with four 802.3bt PoE++ ports at up to 90 W each, a 240 W budget and two SFP slots, rated -40 °C to 75 °C. It suits outdoor surveillance and ITS poles.

  • Extended -40 to 75 °C Rating: Rated -40 °C to 75 °C for unheated surveillance and ITS cabinets that power high-draw PoE devices.
  • Four 802.3bt PoE++ Ports: Four gigabit RJ45 ports with IEEE 802.3bt PoE++ at up to 90 W per port, in Mode A, Mode B or 4-pair.
  • 240 W PoE Budget: A 240 W total budget from 48 to 55 V DC, with load LEDs at 50%, 70% and 90%.
  • Two SFP Slots and ERPS: Two 100/1000 SFP slots for a fibre uplink or ring, with ITU-T G.8032 ERPS recovery under 50 ms.
  • Front-Facing IP40 Case: Every connection faces the front of a small IP40 metal case, for DIN rail or wall mounting in tight enclosures.
View LMP-C602G-SFP-bt-V2 Series
Thermal Dissipation: FanlessFanless
Operating Temperature: Extended TemperatureExtended Temp
Certification: CECE
Certification: FCCFCC
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Overview
  • Specifications
  • Downloads

LMP-C602G-SFP-bt-T-V2 Overview

Outdoor surveillance and ITS poles often carry high-power cameras and other PoE devices in unheated cabinets that swing from frost to summer heat. The LMP-C602G-SFP-bt-T-V2 is the extended temperature build in the Antaira LMP-C602G-SFP-bt-V2 series: a six-port managed gigabit PoE++ switch in a small DIN rail case, rated -40 °C to 75 °C.

It has four 10/100/1000Base-TX RJ45 ports with IEEE 802.3bt PoE++ at up to 90 W per port, from a 240 W total PoE budget, supporting Mode A, Mode B and 4-pair delivery. Two 100/1000 dual-rate SFP slots carry the fibre uplink or ring, and switching is store-and-forward on a 12 Gbps fabric with an 8K MAC table and 9.6 KB jumbo frames. The Layer 2+ firmware covers IEEE 802.1Q VLANs, QoS, IGMP snooping for up to 1024 groups, LACP, LLDP, RMON, Modbus TCP and 802.1X with HTTPS and SSH, and adds static routes with DHCP Option 82. Ring redundancy uses ITU-T G.8032 ERPS with recovery in under 50 ms, alongside STP, RSTP and MSTP.

Power arrives on 48 to 55 V DC redundant inputs on a removable 6-contact terminal block, and Antaira recommends a supply of at least 53 V for 802.3bt loads. The switch itself draws 10.8 W, LEDs show PoE load at 50%, 70% and 90% of the budget, and a power lost warning drives a relay contact rated 24 V DC, 1 A. Overload current and reverse polarity protection are built in, with high EFT and ESD protection. Set-up runs through the web console, Telnet, SSH or CLI, with a Mini USB console port.

The LMP-C602G-SFP-bt-T-V2 sits in an IP40 metal case with every connection on the front, for DIN rail or wall mounting in a tight enclosure. It carries FCC and CE marks, is RoHS compliant and comes with Antaira’s 5-year warranty. The LMP-C602G-SFP-bt-V2 is the same switch rated -10 °C to 65 °C, and the LMX-C602G-SFP-T-V2 is the non-PoE equivalent. We supply and specify the LMP-C602G-SFP-bt-V2 range and can pre-configure IP addressing, VLANs and ring settings before it ships, where you ask.

LMP-C602G-SFP-bt-T-V2 Specifications

Overview
Brand & ModelAntaira LMP-C602G-SFP-bt-T-V2
FeaturesCompact
Fanless
Industrial
Managed Ethernet Switch
Networking
Switching LayerLayer 2+
Switch TypeManaged
Ethernet Ports4x 10/100/1000 BASE-TX [PoE++] [RJ45]
Number of Ethernet Ports4x Ethernet Ports
PoE StandardPoE++ 90W [802.3bt]
PoE Power Budget240W
Number of Fiber Ports2x 100/1000 [SFP]
Networking StandardsIEEE 802.1AB LLDP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1X Port-Based Network Access Control
IEEE 802.3 10BaseTx Ethernet
IEEE 802.3ab 1000BaseTx Gigabit Ethernet
IEEE 802.3ad Link Aggregation
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3bt Power over Ethernet
IEEE 802.3u 100BaseTx Fast Ethernet
IEEE 802.3x Back Pressure Flow Control
IEEE 802.3z Gigabit Fiber
ITU-T G.8032 ERPS
Power
Power Input48-55V DC, Terminal Block
Environmental Conditions
Operating Temperature-40°C to 75°C [-40°F to 167°F]
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Humidity5% - 95% (Non-condensing)
Ingress ProtectionIP40
ShockIEC 60068-2-27
VibrationIEC 60068-2-6
CertificationCE
FCC
RoHS
Mechanical Properties
Weight0.9 Kg (2.1 Lbs)
Dimensions65mm x 110mm x 90mm (2.56" x 4.33" x 3.54")
Mounting OptionsDIN Mount
Wall Mount

Official Antaira UK Distributor

Things Embedded is an official Antaira UK distributor, and we supply the LMP-C602G-SFP-bt-T-V2 with matching SFP transceivers and a DIN-rail power supply, with IP addressing, VLANs and ring settings pre-configured on request. Within the Antaira range, the LMP-C602G-SFP-bt-V2 the standard temperature build for heated or indoor cabinets.

Across our range, the LMP-C602G-SFP-bt-T-V2 sits with our PoE switches for industrial sites, managed switches for industrial networks and industrial network switches.

Shop Antaira

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.

Services
Send Enquiry