Skip to main content

Antaira LMP-C602G-SFP-bt-V2 6-Port Compact Gigabit Managed PoE++ Switches with 4x PoE++ (240W), 2x SFP and Extended Temperature Options

The Antaira LMP-C602G-SFP-bt-V2 series is a family of six-port managed industrial PoE switches with four gigabit IEEE 802.3bt PoE++ ports at up to 90 W each, a 240 W PoE budget, two 100/1000 SFP slots, G.8032 ERPS under 50 ms and 48 to 55 V DC redundant input in a small IP40 case. The LMP-C602G-SFP-bt-V2 series suits surveillance, ITS, utility, oil and gas and factory automation sites.

  • Four 802.3bt PoE++ Ports: Four gigabit RJ45 ports with IEEE 802.3bt PoE++ at up to 90 W per port, in Mode A, Mode B or 4-pair.
  • 240 W PoE Budget: A 240 W total PoE budget from redundant 48 to 55 V DC, with load LEDs at 50%, 70% and 90%.
  • Two SFP Slots and G.8032 ERPS: Two 100/1000 SFP slots for a fibre uplink or ring, with ITU-T G.8032 ERPS recovery under 50 ms.
  • Static Routes and Modbus TCP: Layer 2+ firmware with static routes and DHCP Option 82, plus Modbus TCP, 802.1X, LLDP and RMON.
  • Front-Facing IP40 Case: Every connection faces the front of a small IP40 metal case for DIN rail or wall mounting.
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Description
  • Compare Variants
  • Downloads
UK Support Team: +44 (0)1785 558 300

LMP-C602G-SFP-bt-V2 Description

High-power surveillance cameras, access points and other powered devices can each draw more than 802.3at’s 30 W, so a cabinet powering several of them needs PoE++ on every port and a budget to match. The Antaira LMP-C602G-SFP-bt-V2 series gives four 802.3bt PoE++ ports at up to 90 W each, a 240 W budget and two SFP slots for fibre, in a small IP40 metal case with every connection on the front.

Both models share one design. The four 10/100/1000Base-TX RJ45 ports deliver PoE in Mode A, Mode B or 4-pair, and LEDs show PoE load at 50%, 70% and 90% of the budget. Two 100/1000 dual-rate SFP slots carry the fibre uplink or ring, and switching is store-and-forward on a 12 Gbps fabric with an 8K MAC table and 9.6 KB jumbo frames. The Layer 2+ firmware covers IEEE 802.1Q VLANs, QoS, IGMP snooping, LACP, LLDP, RMON, Modbus TCP and 802.1X, and adds static routes with DHCP Option 82. ITU-T G.8032 ERPS recovers a ring in under 50 ms, with STP, RSTP and MSTP available.

Choose by temperature. The LMP-C602G-SFP-bt-V2 is the standard build, rated -10 °C to 65 °C for heated or indoor cabinets. The LMP-C602G-SFP-bt-T-V2 is the extended temperature build, rated -40 °C to 75 °C for unheated surveillance and ITS cabinets. Where the devices are powered locally, the Antaira LMX-C602G-SFP-V2 series is the non-PoE equivalent.

Antaira names power and utility, water and wastewater, oil, gas and mining, factory automation, security surveillance and ITS as typical applications for the LMP-C602G-SFP-bt-V2 series. Each case is tested for shock to IEC 60068-2-27, vibration to IEC 60068-2-6 and free fall to IEC 60068-2-32, with storage from -40 °C to 85 °C and 5% to 95% non-condensing humidity. Power arrives on 48 to 55 V DC redundant inputs on a 6-contact terminal block, with at least 53 V recommended for 802.3bt loads, a power lost relay alarm, overload and reverse polarity protection and a 10.8 W system draw. The series carries FCC and CE marks and comes with Antaira’s 5-year warranty, and we can pre-configure VLANs, PoE and ring settings before it ships.

LMP-C602G-SFP-bt-V2 Specifications

Overview
Brand & ModelAntaira LMP-C602G-SFP-bt-V2
FeaturesCompact
Fanless
Industrial
Managed Ethernet Switch
Networking
Switching LayerLayer 2+
Switch TypeManaged
Ethernet Ports4x 10/100/1000 BASE-TX [PoE++] [RJ45]
Number of Ethernet Ports4x Ethernet Ports
PoE StandardPoE++ 90W [802.3bt]
PoE Power Budget240W
Number of Fiber Ports2x 100/1000 [SFP]
Networking StandardsIEEE 802.1AB LLDP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1X Port-Based Network Access Control
IEEE 802.3 10BaseTx Ethernet
IEEE 802.3ab 1000BaseTx Gigabit Ethernet
IEEE 802.3ad Link Aggregation
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3bt Power over Ethernet
IEEE 802.3u 100BaseTx Fast Ethernet
IEEE 802.3x Back Pressure Flow Control
IEEE 802.3z Gigabit Fiber
ITU-T G.8032 ERPS
Power
Power Input48-55V DC, Terminal Block
Environmental Conditions
Operating TemperatureSee Variant Specifications
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Humidity5% - 95% (Non-condensing)
Ingress ProtectionIP40
ShockIEC 60068-2-27
VibrationIEC 60068-2-6
CertificationCE
FCC
RoHS
Mechanical Properties
Weight0.9 Kg (2.1 Lbs)
Dimensions65mm x 110mm x 90mm (2.56" x 4.33" x 3.54")
Mounting OptionsDIN Mount
Wall Mount

LMP-C602G-SFP-bt-V2 Variants

Antaira LMP-C602G-SFP-bt-T-V2 6-Port Compact Gigabit Managed PoE++ Switch with 4x PoE++ (240W), 2x SFP and Extended Temperature

LMP-C602G-SFP-bt-T-V2 with 4x 802.3bt PoE++, 240 W budget, 2x SFP and -40 to 75 °C

View
Overview
Brand & ModelAntaira LMP-C602G-SFP-bt-T-V2
Environmental Conditions
Operating Temperature-40°C to 75°C [-40°F to 167°F], Extended Temperature

Antaira LMP-C602G-SFP-bt-V2 6-Port Compact Gigabit Managed PoE++ Switch with 4x PoE++ (240W) and 2x SFP

LMP-C602G-SFP-bt-V2 with 4x 802.3bt PoE++, 240 W budget, 2x SFP and G.8032 ERPS

View
Overview
Brand & ModelAntaira LMP-C602G-SFP-bt-V2
Environmental Conditions
Operating Temperature-10°C to 65°C [14°F to 149°F], Extended Temperature

No related media available for this product series.

Official Antaira UK Distributor

Things Embedded is an official Antaira UK distributor, supplying the LMP-C602G-SFP-bt-V2 series for UK surveillance, ITS, utility and factory automation programmes. Within the Antaira range, the LMX-C602G-SFP-V2 is the non-PoE equivalent, and the LMP-3228G-4X24S-bt is a rack mount PoE++ switch with 28 fibre slots for larger aggregation points.

The LMP-C602G-SFP-bt-V2 series sits among our PoE switches for industrial sites, our managed industrial switches and our full Ethernet switch range. Where four high-power PoE devices need a fibre uplink from a tight enclosure, this is the Antaira series to specify. Send us the device count, the fibre runs and the temperature range inside the cabinet, and our team can recommend the right model, then pre-configure IP addressing, VLANs and ring settings before it ships.

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.