Skip to main content

Antaira LNP-0500G 5-Port Gigabit Unmanaged Industrial Ethernet Switches with 4x PoE+ and Extended Temperature Options

The Antaira LNP-0500G series is a family of industrial unmanaged Gigabit PoE switches with four 10/100/1000 IEEE 802.3af/at PoE+ ports at 30 W each and one Gigabit uplink, with a 10 Gbps backplane, redundant 48 to 55 V DC inputs and an IP30 metal DIN-rail case. The LNP-0500G series suits surveillance, ITS traffic, oil and gas, mining, utility and factory automation deployments.

  • Four Gigabit PoE+ Ports: Four 10/100/1000Base-T RJ45 ports supply IEEE 802.3af/at PoE at up to 30 W each, plus one Gigabit uplink.
  • 10 Gbps Switching Fabric: Store-and-forward switching with an 8K MAC table, 4 Mbit buffer and 10 KB jumbo frames for video traffic.
  • Redundant 48 to 55 V DC: Dual DC inputs on a 6-contact terminal block, with surge protection to 2,000 V DC and ESD to 6,000 V DC.
  • Power Failure Relay: One relay output warns a PLC or alarm panel when a supply fails, so a dropped feed is flagged quickly.
  • UL Class 1 Division 2: Antaira lists UL Class 1 Division 2 and UL 61010-1 certification, in an IP30 metal case for DIN rail or wall.
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Description
  • Compare Variants
  • Downloads
UK Support Team: +44 (0)1785 558 300

LNP-0500G Description

Adding a few high-resolution IP cameras or a new wireless access point to a site is often a matter of finding power and a Gigabit port in the nearest cabinet. The Antaira LNP-0500G series is built for that kind of quick expansion: a five-port Gigabit industrial unmanaged PoE switch with four PoE+ ports and one uplink, in a slim IP30 metal case for a DIN rail.

Every LNP-0500G shares the same design. Four 10/100/1000Base-T RJ45 ports deliver IEEE 802.3af/at PoE at up to 30 W per port, and a fifth 10/100/1000Base-T port links back to the network over Cat.5/5E cable to 100 m. Switching is unmanaged and store-and-forward on a 10 Gbps backplane with an 8K MAC address table, a 4 Mbit packet buffer and 10 KB jumbo frames, so all five ports run at full Gigabit rate with no set-up, and Cat.5/5E cabling to each camera is enough. Redundant 48 to 55 V DC inputs on a 6-contact terminal block let a second supply take over, with reverse polarity and overload current protection, surge protection to 2,000 V DC and ESD protection to 6,000 V DC.

The series comes in two temperature grades. The LNP-0500G is the standard build, rated -10 °C to 70 °C for heated or indoor cabinets. The LNP-0500G-T is the extended temperature build, rated -40 °C to 75 °C for unheated outdoor enclosures. Ports, power and approvals match, so the choice comes down to whether the cabinet is heated or exposed to the weather. For a 12 to 36 V DC supply the LNP-0500G-24 series keeps the same layout, and the LNP-0500G-bt series raises each port to 90 W PoE++.

Antaira lists the LNP-0500G series as UL Class 1 Division 2 and UL 61010-1 certified, with FCC and CE marks and RoHS compliance, and tests it to IEC 60068-2-27 shock and IEC 60068-2-6 vibration. One relay output gives a power failure warning to a PLC or alarm panel, and both models carry Antaira’s 5-year warranty. Antaira names security surveillance, ITS traffic monitoring, oil and gas, mining, power and utility facility management, water and wastewater treatment and automated production lines as typical homes for these Gigabit PoE+ switches.

LNP-0500G Specifications

Overview
Brand & ModelAntaira LNP-0500G
FeaturesFanless
Industrial
Networking
Switch TypeUnmanaged
Ethernet Ports1x 10/100/1000 BASE-TX [RJ45]
4x 10/100/1000 BASE-TX [PoE+] [RJ45]
Number of Ethernet Ports5x Ethernet Ports
PoE StandardPoE+ 30W [802.3at]
Networking StandardsIEEE 802.3 10BaseTx Ethernet
IEEE 802.3ab 1000BaseTx Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3u 100BaseTx Fast Ethernet
IEEE 802.3x Back Pressure Flow Control
Power
Power Input48-55V DC, Terminal Block
Environmental Conditions
Operating TemperatureSee Variant Specifications
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Humidity5% - 95% (Non-condensing)
Ingress ProtectionIP30
ShockIEC 60068-2-27
VibrationIEC 60068-2-6
CertificationCE
FCC
RoHS
UL 61010-1
UL Class 1 Division 2
Mechanical Properties
Weight0.5 Kg (1.1 Lbs)
Dimensions30mm x 142mm x 99mm (1.18" x 5.59" x 3.9")
Mounting OptionsDIN Mount
Wall Mount

LNP-0500G Variants

Antaira LNP-0500G-T 5-Port Gigabit Unmanaged Industrial Ethernet Switch with 4x PoE+ and -40 to 75 °C

LNP-0500G-T with 4x Gigabit PoE+, 1x Gigabit uplink, 48-55V DC and -40 to 75°C

View
Overview
Brand & ModelAntaira LNP-0500G-T
Environmental Conditions
Operating Temperature-40°C to 75°C [-40°F to 167°F], Extended Temperature

Antaira LNP-0500G 5-Port Gigabit Unmanaged Industrial Ethernet Switch with 4x PoE+

LNP-0500G with 4x Gigabit PoE+, 1x Gigabit uplink and 48-55V DC input

View
Overview
Brand & ModelAntaira LNP-0500G
Environmental Conditions
Operating Temperature-10°C to 70°C [14°F to 158°F], Extended Temperature

No related media available for this product series.

Official Antaira UK Distributor

Things Embedded is an official Antaira UK distributor, supplying the LNP-0500G series for UK surveillance, utility and oil and gas programmes. Within the Antaira range, the LNP-0500G-24 keeps the same Gigabit ports on a 12 to 36 V DC input, and the LNP-0500G-bt raises each port to 90 W PoE++. We supply and specify Antaira switches, and our team can help match the LNP-0500G build to the cabinet supply, the operating temperature and the PoE load before you order.

The LNP-0500G series sits among our industrial switches with PoE, our unmanaged industrial switches and our industrial network switches. Where four Gigabit cameras or access points need 30 W each from a 48 V DC cabinet, this is the Antaira series to specify. If you are unsure which build fits, speak to an Antaira specialist on our team.

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.