AVerMedia D133OXB NVIDIA Jetson Orin NX Rugged Embedded Computer with -25 to 60 °C and 9-24V Terminal Block Input

Traffic, security and smart city projects often put the AI computer right beside the camera, in a pole box or ceiling space with little room and a DC supply on terminals. The AVerMedia D133OXB is a rugged embedded computer for that kind of install, built around an NVIDIA Jetson Orin NX, and it is the Orin NX box in the D133 series. It uses the D133 carrier board; the D133ONB takes an Orin Nano 8GB instead, and the D133OXB-1 adds out-of-band management and optional 4G/5G.

The D133OXB is supplied with a Jetson Orin NX 16GB or 8GB module, rated by NVIDIA at up to 100 TOPS and 70 TOPS respectively, enough for detection, tracking and classification across several streams. Two internal MIPI CSI-2 connectors with four lanes each, on 22-pin FPCs, take embedded cameras directly. AVerMedia publishes JetPack 6.2 board support packages on Ubuntu 22.04, and power consumption runs from 17.6 W to 31.5 W depending on load.

Networking is one GbE RJ45 port, with an M.2 E-key 2230 socket for an optional Wi-Fi and Bluetooth card. One HDMI output drives a 4K display at 60 Hz, two USB 3.2 Type-A ports cover peripherals and USB-C handles recovery flashing. A 256GB NVMe SSD sits in the M.2 M-key 2280 socket. The 20-pin expansion header carries nine GPIO lines, two I2C buses and one UART, which suits trigger inputs, relay outputs and serial sensors.

The D133OXB is fan-cooled and rated from -25 °C to 60 °C, with storage from -40 °C to 85 °C and up to 95% humidity at 40 °C, non-condensing. Power is 9-24 V DC on a screw terminal, and AVerMedia lists CE, FCC and KC marks with RoHS 2 compliance. We supply it with the Orin NX module fitted, JetPack flashed and the SSD installed, with any optional Wi-Fi card and antennas fitted, and test it before it ships.