UK 
Neousys Jemii-150D-PoE NVIDIA Jetson Orin NX and Orin Nano Mini-ITX Carrier Board, PoE++, CAN, Supplied Without Module
Linux
PoE Support
Type C
USB3
1x M.2
1x PCIe
NVMe SSD
Extended Temp
CE
FCCJemii-150D-PoE Overview
Indoor autonomous mobile robots need a Jetson board that runs from the vehicle battery, talks to motor controllers over CAN and powers its own cameras. The Jemii-150D-PoE is the DC-powered variant of the Neousys Jemii-150 Mini-ITX carrier board for Jetson Orin NX and Orin Nano modules, supplied without module.
The Jemii-150D-PoE takes the Orin NX 16GB or 8GB and the Orin Nano 8GB or 4GB, and Neousys lists it as Super Mode-enabled. It is 100% BSP-compatible with the Orin Nano Developer Kit and flashes directly from NVIDIA SDK Manager across JetPack releases, so navigation and perception software developed on the kit carries over. Storage is an M.2 Key M 2280 NVMe slot at PCIe Gen4 x1 with an Orin NX module, or Gen3 with an Orin Nano, and a PCIe Gen3 x4 slot takes Ethernet, USB 3.0, PoE or DIO cards.
Power comes in at 9-32 V DC on a terminal block, and Neousys offers a 160 W AC-DC adapter for bench use. A CAN 2.0 pin header, unique to the Jemii-150D-PoE in the series, links the board to drive and battery controllers. Four GbE ports on an Intel I350-AM4 controller supply IEEE 802.3bt PoE++ with up to 90 W on one port and 100 W in total, for depth and vision cameras, and a fifth GbE port comes from the module. The rear panel adds two USB 3.2 Gen1 ports, USB Type-C OTG, DisplayPort at 3840 x 2160 and 60 Hz, an RS-232/422/485 port and three isolated digital inputs and outputs.
An internal RS-232 header, I2C and a debug UART cover sensors and service access. The Jemii-150D-PoE is rated from -25 to 70 °C with CE and FCC Class A EMC compliance. Unlike the Jemii-150A-PoE, it does not include Allxon out-of-band management.
Jemii-150D-PoE Specifications
| Overview | |
|---|---|
| Brand & Model | Neousys Jemii-150D-PoE |
| Features | Compact Fanless |
| Performance | |
| AI Performance | 20–100 TOPS |
| System-on-Module | NVIDIA Jetson Orin Nano 4GB: 20 TOPS, 512-core Ampere GPU with 16 Tensor Cores, 6-core Arm Cortex-A78AE 1.5GHz, 4GB 64-bit LPDDR5, 5-10W NVIDIA Jetson Orin Nano 8GB: 40 TOPS, 1024-core Ampere GPU with 32 Tensor Cores, 6-core Arm Cortex-A78AE 1.5GHz, 8GB 128-bit LPDDR5, 7-15W NVIDIA Jetson Orin NX 16GB: 100 TOPS, 1024-core Ampere GPU with 32 Tensor Cores, 8-core Arm Cortex-A78AE 2.0GHz, 16GB 128-bit LPDDR5, 10-25W NVIDIA Jetson Orin NX 8GB: 70 TOPS, 1024-core Ampere GPU with 32 Tensor Cores, 6-core Arm Cortex-A78AE 2.0GHz, 8GB 128-bit LPDDR5, 10-20W |
| PCIe Gen Support | PCIe 4.0 PCIe 3.0 |
| Operating System | Linux |
| Graphics | |
| Multi Display Support | Single Display Support |
| Display Outputs | 1x Display Port |
| Audio | |
| Interface | Line-Out Mic-In |
| I/O | |
| Ethernet | 5x Ethernet Ports |
| 1x GbE LAN [RJ45] 4x GbE LAN [RJ45] [PoE] | |
| LAN Controllers | Intel i350AM4 |
| PoE Standard | PoE++ [IEEE 802.3bt] PoE [IEEE 802.3af] PoE+ [IEEE 802.3at] |
| PoE Power Budget | 90W |
| USB | 5x USB Ports |
| 1x USB 2.0 [Type C] 2x USB 3.2 Gen 1 [Board] 2x USB 3.2 Gen 1 [Type A] | |
| Serial | 1x Serial Ports |
| 1x RS232/422/485 [DB9] | |
| Digital I/O | Isolated DIO [3-in, 3-out] |
| Remote Management | Allxon Out-of-Band |
| Expansion | |
| M.2 | 1x M.2 Expansion Slots |
| 1x M.2 M-Key [PCIe x1 Gen4] [2280] | |
| PCIe | 1x PCIe Slots |
| 1x PCIe [x4 Slot] [Gen3] | |
| Storage | |
| Storage | 1x M.2 SSD [PCIe] |
| NVMe | NVMe SSD Support |
| Power | |
| Power Input | Optional AC Power Supply |
| Power Support Modes | AT: PWR on Input ATX: Press Button to Power |
| Environmental Conditions | |
| Thermal Dissipation | Optional Fan |
| Operating Temperature | -25°C to 70°C [-13°F to 158°F] |
| Storage Temperature | -40°C to 85°C [-40°F to 185°F] |
| EMC | EN55032 EN55035 |
| Certification | CE FCC |
| Mechanical Properties | |
| Weight | 0.2 Kg (0.44 Lbs) |
| Dimensions | 170mm x 170mm (6.69" x 6.69") |
- Jemii-150D-PoE Datasheet Download
Official Neousys UK Distributor
Things Embedded is an official Neousys UK distributor, and the Jemii-150D-PoE is the DC-powered, CAN-equipped build of the Jemii-150. For an enclosed robotics build, the NRU-160-FT takes the same Orin NX and Orin Nano modules with GMSL2 or M12 PoE+, and the NRU-150-FT is the flattop fanless Orin NX edge AI computer.
The Jemii-150D-PoE sits with our NVIDIA Jetson Orin carrier boards and the wide-temp industrial PCs range.
Consult. Design. Integrate.
Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.
Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.