Sintrones IBOX-600-IP66 NVIDIA Jetson Orin NX and Orin Nano IP66 Waterproof Edge AI Computers

Camera and sensor analytics increasingly have to run where the equipment is mounted: on a pole beside a road, on the outside of a vehicle, at a trackside cabinet or above a field. Those installs see rain, dust and wide temperature swings, so the computer either lives inside a separate enclosure or is sealed itself. The Sintrones IBOX-600-IP66 series takes the second route. These waterproof edge AI computers put NVIDIA Jetson Orin NX and Orin Nano modules inside an IP66 aluminium alloy enclosure that is dustproof and protected against powerful water jets, with fanless passive cooling and no vents to seal.

Every connection on the front panel is a circular industrial connector. Two M12 X-coded ports carry one 2.5GbE and one GbE link, while M8 A-coded connectors handle an RS-232/422/485 serial port, a CAN FD port that is backward compatible with CAN 2.0, and three digital inputs with four digital outputs. Two USB 3.2 Type-A ports sit behind a protection cover alongside an HDMI output with 4K support. Inside, an M.2 2280 Key M slot holds the NVMe SSD with the JetPack BSP pre-installed, and an M.2 Key B slot with a nano SIM, an M.2 2230 Key E slot and a full-size mPCIe slot take optional 4G or 5G WWAN, Wi-Fi and GPS modules, with five SMA antenna holes on the rear panel.

The four waterproof edge AI computers in the IBOX-600-IP66 series differ only in the Jetson module. The IBOX-600-IP66-ONX16 uses the Orin NX 16GB with an 8-core Arm Cortex-A78AE CPU and two NVDLA v2 deep learning accelerators, for the largest models and stream counts in the family. The IBOX-600-IP66-ONX8 keeps the 1024-core Ampere GPU with a 6-core CPU, one NVDLA and 8 GB of LPDDR5. The IBOX-600-IP66-ON8 moves to the Orin Nano 8GB with the same GPU core count and a 1.5 GHz CPU, and the IBOX-600-IP66-ON4 runs the Orin Nano 4GB with a 512-core GPU for single-model inference.

Power arrives on an M12 K-coded connector accepting 9 to 60 V DC, with smart power and ignition management, over-current, over-voltage, surge and reverse polarity protection, plus an optional backup battery kit. The computers operate from -25 °C to 70 °C and are tested to IEC 60068-2-64 vibration and MIL-STD-810G shock and vibration. They carry CE, FCC Class A and E-Mark certification, are designed to the EN 50155 and EN 45545-2 (R25) railway standards, and Sintrones states Jetson Orin module availability through January 2032. Typical IBOX-600-IP66 deployments include rolling stock, fleet vehicles, smart poles and traffic control, construction sites and precision agriculture.