Vecow PE-2001H Intel I210 1-Port GigE 802.3bt PoE++ PCIe Card with 90W Output and Wide Temperature

Some cameras and sensors draw more than a PoE+ port can deliver, and a single high-power device often sits on its own link, apart from the rest of the vision system. The PE-2001H is Vecow’s single-port PoE++ PCIe card for that job, and Vecow names medical vision, video streaming, real-time inspection and scientific research among its uses. We supply it configured and tested, with the card fitted in the host and the PoE budget checked against the device it powers.

An Intel I210 Gigabit controller drives the one RJ45 port at 1 Gbps, 100 Mbps or 10 Mbps, with jumbo frames up to 9728 bytes. The host interface is PCI Express x1, so the PE-2001H fits the smallest PCIe slot and leaves wider slots for a GPU or further network cards.

The port complies with IEEE 802.3bt Type 3 and Type 4 and supplies up to 90 W at 54 V DC. It is also compliant with 802.3at and 802.3af, so standard PoE and PoE+ devices connect too. PoE power comes from a 6-pin 12 V ATX connector by default; for 802.3at or 802.3af loads, a jumper can switch the supply to the PCIe bus, which provides 25 W. An LED shows the PoE on/off state. For more ports, the PE-6004H carries four 2.5GbE PoE++ ports, and the PE-2004 offers four Gigabit PoE+ ports on Intel I210 controllers.

Vecow rates the PE-2001H from -25 °C to 60 °C with airflow, so the host needs air moving across the slot, and from -40 °C to 85 °C in storage, with humidity from 5% to 95% non-condensing. The card has a full-height bracket. Vecow lists Windows 11 and Linux support, and the datasheet shows CE and FCC under EMC with the RoHS mark.