DFI PTH173-IE-U7365RE Intel Core Ultra 7 365RE (Panther Lake) Mini-ITX Mainboard with 12 to 28 V DC Input and Wide Temperature

A control cabinet on a packaging line or a water treatment site is usually sealed, fed from a 24 V DC rail and warm inside by the afternoon. The PTH173-IE-U7365RE is the Core Ultra 7 build in the DFI PTH173 series that suits that cabinet: it runs from the rail directly and keeps the processor’s heat output low.

Its Intel Core Ultra 7 365RE (Panther Lake) sits in the 15 W configuration DFI lists for the RE parts, with Intel vPro and Arc Xe3 graphics. Two DDR5 SO-DIMM slots take up to 128 GB in dual channel, enough for a SCADA client, historian and protocol gateway on one board. HDMI 2.0, DP++ and USB-C with DisplayPort Alt Mode drive three 4K displays at 60 Hz, and an optional M.2 A-key module adds a door-mounted panel as a fourth.

The -IE- build has a PCIe Gen5 x4 slot for a fieldbus or I/O card. Three 2.5GbE ports on Intel I226V and I226LM controllers keep the control network, the site network and a remote link apart, and vPro on the I226LM port allows out-of-band management. Four COM ports (two RS-232/422/485, two RS-232), 8-bit DIO, an M.2 M-key for NVMe, an M.2 B-key with Nano SIM for cellular and an M.2 E-key for Wi-Fi complete the board.

The PTH173-IE-U7365RE takes 12 to 28 V DC on a barrel connector or 4-pin connector and operates across a wide temperature range of -20 to 70 °C under an active cooler, with CE, FCC, UKCA and RoHS compliance. With more thermal room, PTH173-IE-U7366HRE moves to the 25 W Core Ultra 7 366HRE. PTH173-IE-U5335RE keeps the 15 W class on the Core Ultra 5 335RE.