DFI PTH173-IE-U7366HRE Intel Core Ultra 7 366HRE Industrial Mini-ITX Motherboard with 12 to 28 V DC Input and -20 to 70 °C

Autonomous mobile robots and automated guided vehicles run on 24 V battery packs, carry cameras and a motion card, and drive through cold stores and unheated warehouses. The PTH173-IE-U7366HRE is the Core Ultra 7 HRE build in the DFI PTH173 series, and it combines a 12 to 28 V DC input, a PCIe slot and a wide temperature rating on one Mini-ITX board.

It carries the Intel Core Ultra 7 366HRE (Panther Lake) with Intel vPro and Arc Xe3 graphics, in the 25 W configuration DFI lists for the board. Two DDR5 SO-DIMM slots run at up to 7200 MHz in dual channel and take up to 128 GB for mapping and perception workloads. HDMI 2.0, DP++ and USB-C with DisplayPort Alt Mode give three 4K outputs at 60 Hz, with a fourth through an optional M.2 A-key module.

As an -IE- build it adds a PCIe Gen5 x4 slot for a frame grabber, motion controller or fieldbus card. An M.2 M-key with PCIe Gen5 x4 takes an NVMe SSD, a B-key with Nano SIM takes a 5G or LTE module, and an E-key takes Wi-Fi for fleet communications. Three 2.5GbE ports on Intel I226V and I226LM controllers link lidar, cameras and the safety controller, with four COM ports, 8-bit DIO, five rear USB Type-A ports and five internal USB 2.0.

The PTH173-IE-U7366HRE operates from -20 to 70 °C under an active cooler, takes 12 to 28 V DC on a barrel connector or 4-pin connector, and carries CE, FCC, UKCA and RoHS compliance. Where battery life matters more than headroom, PTH173-IE-U7365RE uses the 15 W Core Ultra 7 365RE. For the most CPU in a conditioned space, PTH173-IB-U9388H carries the Core Ultra 9 388H.