Diamond Systems JETBOX FLOYD-SC : JB-FLDSC-BASE-01 NVIDIA Jetson Nano, TX2 NX or Xavier NX DIN Rail Embedded PC Kit (BB01)

Some teams standardise on their own Jetson modules and software image, and only need a proven enclosure and carrier to put them in. The Diamond Systems JB-FLDSC-BASE-01 is a DIN rail embedded PC kit in the JETBOX FLOYD-SC series that includes the Floyd SC carrier board, enclosure and every other component except the Jetson module, in a fanless steel and aluminium enclosure with shelf and DIN rail mounting.

The kit takes any Nano-size Jetson module: Jetson Nano, TX2 NX or Xavier NX. The module is not included, and system assembly and operating system programming are needed before use, so the kit suits teams that already hold modules or have their own JetPack build process.

The JB-FLDSC-BASE-01 is built on Diamond’s FLDSC-BB01 carrier board rather than the BB02 used in the complete JETBOX FLOYD-SC systems, so the exact I/O set depends on that carrier and on the module you install. Diamond’s published JETBOX FLOYD-SC I/O covers HDMI, DisplayPort, Gigabit Ethernet, USB 3.0, USB 2.0, two serial ports and eight screw-terminal GPIO on the BB02, so the BB01 configuration should be confirmed against the chosen module before deployment.

Power on the JB-FLDSC-BASE-01 is a 7-24 V DC input, and a 12 V AC adapter is included for bench work. The integrated heat sink cover cools the module without a fan, and the system supports -25 to +80 °C operation across the full range of the Jetson modules. For complete systems with a module installed, see the JB-FLDSC-NAO-02 or the JB-FLDSC-XNX-02.