Nexcom X102 3.5" SBCs with Intel Alder Lake-N, Dual 2.5GbE and Triple Display
The Nexcom X102 series is a family of 3.5 inch SBCs on the Intel Processor N50 or N97, with DDR4 to 16 GB, two HDMI outputs plus eDP, two 2.5GbE ports, four USB 3.2 Gen 2, an M.2 Key M socket and mini-PCIe for Wi-Fi 6/6E or LTE on 12 V DC. The series suits IoT gateways, self-service kiosks, bus stops and smart city displays.
- Intel Alder Lake-N: Intel Processor N50 at 6 W or N97 at 12 W, with Intel UHD graphics.
- Dual 2.5GbE: Two 2.5GbE ports on Intel i226-V controllers with wake on LAN.
- Three Displays: Two HDMI 1.4b outputs at up to 3840 x 2160 plus eDP, with LVDS by jumper.
- M.2 and Mini-PCIe with SIM: M.2 2242 Key M for SATA or PCIe SSDs and mini-PCIe with nano SIM for Wi-Fi 6/6E or LTE.
- Four USB 3.2 Gen 2: Four USB 3.2 Gen 2 ports on the edge, three USB 2.0 internally and onboard TPM 2.0.
Intel
Linux
Windows
Triple Display Support
2.5GbE
USB3
1x M.2
1x mPCIe
1x SIM
4G
5G
Wi-Fi
CE
FCC
X102 Description
Self-service kiosks, drive-thru screens, bus stop signs and IoT gateways share a brief: a small board that runs quietly on 12 V, drives two or three screens, connects over fast Ethernet and adds Wi-Fi or LTE where there is no cable. The Nexcom X102 series is a 3.5 inch SBC on Intel Alder Lake-N processors built for that brief, with two 2.5GbE ports, three display outputs and a mini-PCIe slot with a nano SIM.
Every X102 shares the same layout. One 260-pin DDR4-3200 non-ECC SO-DIMM socket takes up to 16 GB. Two HDMI 1.4b outputs run at up to 3840 x 2160 at 30 Hz and an eDP interface drives a panel at up to 1920 x 1080 at 60 Hz, with LVDS selected by jumper, from integrated Intel UHD graphics. I/O covers two 2.5GbE ports on Intel i226-V controllers with wake on LAN, four USB 3.2 Gen 2 ports on the edge and three USB 2.0 internally, one RS-232/422/485 and one RS-232 port, 4 GPI and 4 GPO, and Realtek ALC888S audio with a 2 W speaker output. Storage is an M.2 2242 Key M socket with SATA and PCIe signals plus a SATA port, and a full-size mini-PCIe slot with a nano SIM slot takes Wi-Fi 6/6E or LTE modules. A TPM 2.0 chip and watchdog timer are onboard.
The X102-N50 carries the Intel Processor N50 at up to 3.4 GHz with a 6 W TDP, which suits gateways and signage at the lowest power draw. The X102-N97 carries the Intel Processor N97 at up to 3.6 GHz with a 12 W TDP for kiosk front ends and heavier playback. Both keep the same I/O and connector positions, so one enclosure design covers either build.
Power is 12 V DC through a locking DC jack. The series operates from 0 to 60 °C, stores from -20 to 80 °C and handles humidity up to 95%, non-condensing. The boards measure 146 x 102 mm, support Windows 10 64-bit, Windows 11 and Linux 4.1 and above, and carry CE marks under EN 55035 and EN 55032 and an FCC Class A mark under Part 15B. Nexcom names IoT gateways, self-service kiosks, endless aisles, QSRs, drive-thru kiosks, bus stops, digital transit information signs, intelligent pole and lighting systems and passenger information displays for smart cities as target applications.
X102 Specifications
| Overview | |
|---|---|
| Brand & Model | Nexcom X102 |
| Features | Compact Embedded Fanless Industrial |
| Performance | |
| Processor Series | Intel Processor N Series Alder Lake |
| Processor Models | See Variant Specifications |
| Performance Cores | See Variant Specifications |
| Memory | 1x DDR4 3200MHz SO-DIMM Slot, 16GB |
| Operating System | Linux |
| Graphics | |
| Integrated GPU | Intel UHD Series |
| Display Standards | eDP 1.4b HDMI 1.4b |
| Multi Display Support | Triple Display Support |
| Display Outputs | 1x eDP 2x HDMI |
| Audio | |
| Codec | RealTek ALC888S, HD Audio |
| Interface | Line-Out Mic-In |
| I/O | |
| Ethernet | 2x Ethernet Ports |
| 2x 2.5 GbE LAN [RJ45] | |
| LAN Controllers | Intel I226V |
| USB | 7x USB Ports |
| 3x USB 2.0 [Board] 4x USB 3.2 Gen 2 [Type A] | |
| Serial | 2x Serial Ports |
| 1x RS232 [Board] 1x RS232/422/485 [Board] | |
| GPIO | GPIO [4-in, 4-out] |
| Expansion | |
| M.2 | 1x M.2 Expansion Slots |
| 1x M.2 M-Key [PCIe/SATA] [2242] | |
| mPCIe | 1x mPCIe Slots |
| 1x mPCIe [PCIe/USB/SIM] | |
| SIM Slots | 1x SIM Slots |
| Wireless Connectivity | Optional 4G Modem Optional 5G Modem Optional WiFi/Bluetooth |
| Storage | |
| Storage | 1x M.2 SSD 1x SATA Port |
| Power | |
| Power Input | 12V DC [Barrel Connector] |
| Power Support Modes | ATX: Press Button to Power |
| Environmental Conditions | |
| Thermal Dissipation | Optional Heatsink |
| Operating Temperature | 0°C to 60°C [32°F to 140°F] |
| Storage Temperature | -20°C to 80°C [-4°F to 176°F] |
| Humidity | 0% - 95% (Non-condensing) |
| Certification | CE FCC UKCA |
| Mechanical Properties | |
| Weight | 0.2 Kg (0.44 Lbs) |
| Dimensions | 146mm x 102mm x 0mm (5.75" x 4.02" x 0") |
No specifications match your search.
See product variants.
X102 Variants
Nexcom X102-N97 3.5″ SBC with Intel Processor N97, Dual 2.5GbE and Triple Display
X102 with Intel Processor N97 at 12 W
| Overview | |
|---|---|
| Brand & Model | Nexcom X102-N97 |
| Performance | |
| Processor Models | N97 |
| Performance Cores | 4 |
Nexcom X102-N50 3.5″ SBC with Intel Processor N50, Dual 2.5GbE and Triple Display
X102 with Intel Processor N50 at 6 W
| Overview | |
|---|---|
| Brand & Model | Nexcom X102-N50 |
| Performance | |
| Processor Models | N50 |
| Performance Cores | 2 |
- X102 Datasheet Download
No related media available for this product series.
Official NEXCOM UK Distributor
Things Embedded is an official Nexcom UK distributor, supplying the X102 series configured for UK retail and smart city projects. Within the Nexcom range the EBC 358 offers an Elkhart Lake design with 12 or 24 V DC and three RS-232 ports, and the X101-J3455-E is the earlier Celeron J3455 board with two HDMI.
The X102 series sits among our 3.5 inch SBCs, our Intel Alder Lake products and our Linux SBCs. Where a kiosk, sign or gateway needs 2.5GbE, three screens and Wi-Fi 6/6E or LTE on 12 V, this is the Nexcom series to specify.
Consult. Design. Integrate.
Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.
Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.