Skip to main content
Contact Us
Sintrones

Sintrones IMB-600-ONX8-DEV KIT NVIDIA Jetson Orin NX 8GB Mini-ITX Edge AI Developer Kit

The IMB-600-ONX8-DEV-KIT is the entry configuration in the Sintrones IMB-600 series, pairing the NVIDIA Jetson Orin NX 8GB SOM with the same low-profile Mini-ITX edge AI developer kit board as its 16GB sibling. Suits single-camera vision, CAN-connected vehicle prototypes and edge inference work that fits within 8GB of module memory.

  • NVIDIA Jetson Orin NX 8GB SOM: The 8GB Orin NX module covers single-stream and lighter multi-stream inference where the workload fits a smaller memory budget.
  • Low-Profile 35.4mm Build: At 170mm x 170mm x 35.4mm and 0.9kg, the base kit mounts easily in bench rigs, test fixtures and prototype vehicles.
  • 8-Lane MIPI CSI-2 Interface: A direct MIPI camera connection supports vision development; the Plus sibling adds GMSL-2 capture for automotive cameras.
  • Gen4 NVMe Plus Wireless Expansion: Three M.2 slots and full-size mPCIe take NVMe storage and optional 4G/5G, GPS/GLONASS and WiFi/Bluetooth modules.
  • Ignition-Aware Wide-Range Power: A 9-60V DC terminal-block input with AT/ATX modes and ignition control runs the kit from vehicle batteries during development.
View IMB-600 Series
Operating Software: LinuxLinux
Ethernet Speed: 2.5GbE2.5GbE
USB Connector Type: Type CType C
USB Generation: USB3USB3
M.2: 33x M.2
mPCIe: 11x mPCIe
Connectivity: 4G4G
Connectivity: 5G5G
Connectivity: GPSGPS
Connectivity: WirelessWi-Fi
NVMe: NVMe SSD SupportNVMe SSD
Ignition Sensing: Supports Ignition ControlIgnition Control
Thermal Dissipation: FanlessFanless
Certification: CECE
Certification: FCCFCC
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Overview
  • Specifications
  • Downloads

IMB-600-ONX8-DEV KIT Overview

Right-sizing compute is half the job in edge AI: a model that fits an 8GB module does not need a 16GB system underneath it. The Sintrones IMB-600-ONX8-DEV-KIT is the Mini-ITX edge AI developer kit in the IMB-600 series that pairs the NVIDIA Jetson Orin NX 8GB system-on-module with the same carrier board, I/O set and power envelope as its 16GB sibling, running JetPack 6.2 on Linux.

Proving a workload on the 8GB module during development answers the sizing question before any deployment hardware is ordered. PCIe 4.0 runs through the board, with the M-key 2280 slot taking an NVMe SSD on four lanes of Gen4 for datasets and recorded sensor logs. The IMB-600-ONX8-DEV-KIT is the low-profile 35.4mm build, easy to fix into bench rigs and test enclosures, and pipelines that outgrow the module can move to the IMB-600-ONX16-DEV-KIT without changing the board around it.

Vision development starts at the 8-lane MIPI CSI-2 connector, with HDMI for a local display. The dual-LAN arrangement of one 2.5GbE and one GbE port on Intel I226 controllers covers streaming and bench networking, alongside two USB 3.2 Gen 2 Type-A ports and a USB 2.0 Type-C port. CAN FD, an RS232/422/485 serial port and 4-in/4-out digital I/O connect prototypes to vehicle and machine networks, while B-key, E-key and full-size mPCIe sockets accept optional 4G/5G, GPS/GLONASS and WiFi/Bluetooth modules.

Like the rest of the range, the IMB-600-ONX8-DEV-KIT follows Sintrones deployment practice on power and environment: 9-60V DC on a terminal block, AT and ATX modes, ignition control, and fanless operation from -25°C to 50°C in a 0.9kg aluminium build with CE, FCC and UKCA marks. For automotive multi-camera work on the same module, the IMB-600-ONX8-DEV-KIT-PLUS adds four GMSL-2 inputs on FAKRA-Z connectors.

IMB-600-ONX8-DEV KIT Specifications

Overview
Brand & ModelSintrones IMB-600-ONX8-DEV KIT
FeaturesCompact
Embedded
Fanless
Performance
AI Performance70 TOPS
System-on-ModuleNVIDIA Jetson Orin NX 8GB: 70 TOPS, 1024-core Ampere GPU with 32 Tensor Cores, 6-core Arm Cortex-A78AE 2.0GHz, 8GB 128-bit LPDDR5, 10-20W
PCIe Gen SupportPCIe 4.0
Operating SystemLinux
Jetpack VersionJetPack 6.2
Graphics
Display Outputs1x HDMI
I/O
Ethernet2x Ethernet Ports
1x 2.5 GbE LAN [RJ45]
1x GbE LAN [RJ45]
LAN ControllersIntel I226
USB3x USB Ports
1x USB 2.0 [Type C]
2x USB 3.2 Gen 2 [Type A]
Serial1x Serial Ports
1x RS232/422/485 [DB9]
CANbus1x CANbus Ports
1x CAN FD [DB9]
Digital I/ODIO [4-in, 4-out]
MIPI Interface1x 8 Lane MIPI CSI-2
Expansion
M.23x M.2 Expansion Slots
1x M.2 B-Key [USB] [3042/3052]
1x M.2 E-Key [PCIe x1/USB 2.0] [2230]
1x M.2 M-Key [PCIe x4 Gen4] [2280]
mPCIe1x mPCIe Slots
1x mPCIe [USB]
Wireless ConnectivityOptional 4G/5G
Optional GPS/GLONASS
Optional WiFi/Bluetooth
Storage
Storage1x M.2 SSD
NVMeNVMe SSD Support
Power
Power Input9-60V DC Input [Terminal Block]
Power Support ModesAT: PWR on Input
ATX: Press Button to Power
Ignition SensingSupports Ignition Control
Environmental Conditions
Operating Temperature-25°C to 50°C [-13°F to 122°F]
Storage Temperature-40°C to 80°C [-40°F to 176°F]
Humidity10-90% (Non-condensing)
CertificationCE
FCC
UKCA
Mechanical Properties
Weight0.9 Kg (1.98 Lbs)
Chassis MaterialAluminium
Dimensions170mm x 170mm x 35.4mm (6.7″ x 6.7″ x 1.4″)

Official Sintrones UK Distributor

Things Embedded is an official Sintrones UK distributor, scoping, building and supporting Sintrones hardware across the full development-to-deployment path. Projects proven on the IMB-600-ONX8-DEV-KIT typically deploy onto the IBOX-600 series, which offers the same Orin NX modules in compact fanless enclosures, with the IBOX-600-IP66 family the sealed step up for outdoor and washdown installs.

More widely, our industrial Jetson computers show the deployable options at this compute level, and the catalogue of AI edge computers we support covers projects that land outside the Jetson line altogether. Prototypes that will live beside an engine bay or in an unheated cabinet can be checked against our wide-temp industrial PCs before the enclosure is chosen.

Shop Sintrones

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.

Services
Send Enquiry