UK 
Stereolabs ZED-X-ONE-CORE-FISHEYE (ZED-414013) Ultra-Small Board-Level MIPI Camera with Fisheye 1.38 mm Lens, 204° Field of View and Global Shutter
Extended TempZED-X-ONE-CORE-FISHEYE Overview
A robot that moves among people needs to see to the sides as well as ahead, and every extra camera adds cost, wiring and compute. The Stereolabs ZED-X-ONE-CORE-FISHEYE fits a 1.38 mm f/2.0 fisheye lens with a 204° horizontal view to the board-level camera of the ZED-X-ONE-CORE series, so a few modules can cover the space around a machine. For a flatter image, the ZED-X-ONE-CORE-WIDE gives 110° and the ZED-X-ONE-CORE-NARROW 73°.
The full field is 204°(H) x 137°(V) x 218°(D), with f-theta distortion under 18.8%, the figure to model when you undistort the image. The 1/2.6″ 2.3MP sensor uses a global shutter, so the scene is captured without skew while the robot turns. Output runs at 1920 x 1200 at 60 fps, 1920 x 1080 at 60 fps in cropping mode or 960 x 600 at 120 fps in binning mode, with 71.4 dB dynamic range and a Bosch BMI088 six-axis IMU at 200 Hz.
Four-lane MIPI CSI-2 leaves the ZED-X-ONE-CORE-FISHEYE on a 30-pin Micro I-PEX connector that also carries 3.3 V power, a frame-sync input so several fisheye modules trigger together, and a flash-enable output for external lighting. The ZED-LINK-MIPI-QUAD takes up to four cameras on a Jetson AGX Orin Developer Kit, or two on Jetson Thor through the NVIDIA Holoscan Sensor Bridge, over I-PEX cables of up to 50 cm.
The camera draws 0.8 W at 3.3 V over the MIPI cable and is rated from -20 °C to 60 °C. Four mounting holes fix the board inside your housing. Stereolabs lists REACH and RoHS compliance and a two-year warranty. We supply it tested with the ZED Link MIPI Quad, I-PEX cables and Jetson host for your robot, with drivers configured before it ships.
ZED-X-ONE-CORE-FISHEYE Specifications
| Overview | |
|---|---|
| Brand & Model | Stereolabs ZED-X-ONE-CORE-FISHEYE (ZED-414013) |
| Features | Compact Embedded |
| Camera | |
| Camera Type | Monocular |
| Camera Interface | MIPI CSI-2 [Micro I-PEX] |
| Image Sensor | 2.3MP 1/2.6" [3µm] |
| Video Modes | 1920x1200 @ 60fps 960x600 @ 120fps |
| Shutter Type | Global Shutter |
| Lens | Fisheye |
| Field of View | 204°H x 137°V x 218°D [1.38mm] |
| Motion Sensors | 6-axis IMU [200Hz] |
| Compatible Hosts | NVIDIA Jetson Orin NVIDIA Jetson Thor |
| Environmental Conditions | |
| Operating Temperature | -20°C to 60°C [-4°F to 140°F] |
| Certification | REACH RoHS |
| Mechanical Properties | |
| Weight | 17 g (0.6 oz) |
| Dimensions | 27mm x 27mm x 30mm (1.06" x 1.06" x 1.17") |
- ZED-X-ONE-CORE-FISHEYE Datasheet Download
Official Stereolabs UK Distributor
Things Embedded is an official Stereolabs UK distributor, and we supply the ZED-X-ONE-CORE-FISHEYE tested with the I-PEX MIPI cable and the ZED Link MIPI Quad on your Jetson host before it ships. Within the Vecow range, the ZED-X-ONE-CORE-WIDE narrows the view to 110° with lower distortion for a flatter forward image.
Across our range, the ZED-X-ONE-CORE-FISHEYE sits with our inspection and vision cameras and the Stereolabs range.
Consult. Design. Integrate.
Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.
Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.