Skip to main content

Vecow SE-1000 Four Port Gigabit LAN Switch Cards for PCIe x1 Slots

The Vecow SE-1000 series is a family of LAN switch cards with four Gigabit RJ45 ports behind an integrated single-chip switch on one Intel I210 controller, in a PoE+ build and a LAN bypass build. Both use PCI Express x1 and operate from -40 to 85 °C. The series suits surveillance, in-vehicle, transport and mobile NVR systems.

  • Four Switched Gigabit Ports: Four 10/100/1000 Mbps RJ45 ports behind an integrated single-chip Gigabit switch.
  • PCI Express x1: One Intel I210 controller links the switch to the host through a PCIe x1 slot.
  • PTP and Traffic Shaping: IEEE 1588 PTP, 802.1AS and the 802.1Qav traffic shaper for timed, prioritised streams.
  • Energy Efficient Ethernet: 802.3az EEE and jumbo frames up to 9728 bytes on every port.
  • -40 to 85 °C Operation: Industrial-grade operation and storage from -40 to 85 °C, with Windows and Linux listed.
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Description
  • Compare Variants
  • Downloads
UK Support Team: +44 (0)1785 558 300

SE-1000 Description

Vehicle and road-side computers often have only a short PCIe x1 slot free, yet the system still needs four Gigabit ports for cameras or network segments. The Vecow SE-1000 series answers with a LAN switch card: four RJ45 ports behind an onboard Gigabit switch, fed to the host through one x1 link. Vecow’s ordering table names both as 4-port RJ45 PCI Express LAN switch cards. We specify these cards for the transport and surveillance systems we build and supply.

Both builds share one architecture. An all-in-one, fully integrated single-chip Gigabit switch serves four 8-pin RJ45 ports at 10/100/1000 Mbps, and one Intel Ethernet Controller I210 links the switch to the host over PCI Express x1. The four ports therefore share one host link rather than each having its own controller. Vecow describes the switch as an all-in-one design with lower power consumption. The design supports jumbo frames up to 9728 bytes, 802.3az Energy Efficient Ethernet, IEEE 1588 PTP, 802.1AS and the 802.1Qav traffic shaper for timed, prioritised streams.

The two variants differ in what the ports add. The SE-1004 is the PoE+ build: each port complies with IEEE 802.3at and supplies up to 25.5 W at 48 V DC from a 4-pin 12 V connector, so four cameras each need one cable. The SE-1014 is the LAN bypass build: Vecow lists it with advanced LAN bypass, and the series supports hardware LAN bypass mode, with relays on the board. Both builds keep the same switch, controller, x1 interface, board size and temperature rating, so the choice rests only on power or bypass. Choose the SE-1004 for powered cameras and the SE-1014 where the host joins network segments.

Vecow does not state a total PoE budget for the SE-1004, so we size its 12 V feed against the camera loads. Vecow rates both cards industrial-grade, operating and storing from -40 to 85 °C, at 5 to 95% humidity. Each board measures 168 x 121 mm with a full-height bracket, and Vecow lists CE and FCC. Vecow lists Windows 10, 8.1 and 7 and Linux support, and names intelligent surveillance, in-vehicle management, intelligent transport systems, mobile DVR/NVR and industrial Ethernet as applications.

SE-1000 Specifications

Overview
Brand & ModelVecow SE-1000
I/O
EthernetSee Variant Specifications
LAN ControllersIntel I210
Power
Power Input12V DC [4-Pin]
Environmental Conditions
Operating Temperature-40°C to 85°C [-40°F to 185°F]
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Humidity5% - 95% (Non-condensing)
CertificationCE
FCC
Mechanical Properties
Dimensions168mm x 121mm (6.61" x 4.76")

SE-1000 Variants

Vecow SE-1014 Intel i210 4-Port Gigabit RJ45 LAN Bypass PCIe x1 Expansion Card

SE-1000 LAN switch card with advanced hardware LAN bypass

View
Overview
Brand & ModelVecow SE-1014
I/O
Ethernet4x Ethernet Ports
4x GbE LAN [RJ45]

Vecow SE-1004 Intel i210 4-Port Gigabit RJ45 PoE+ PCIe x1 Expansion Card

SE-1000 LAN switch card with PoE+ on four Gigabit RJ45 ports

View
Overview
Brand & ModelVecow SE-1004
I/O
Ethernet4x Ethernet Ports
4x GbE LAN [RJ45] [PoE]
PoE StandardPoE+ [IEEE 802.3at]
PoE Power Budget25.5W

No related media available for this product series.

Official Vecow UK Distributor

Things Embedded is an official Vecow UK distributor, supplying the SE-1000 series for UK transport and surveillance programmes. Within the Vecow range the PE-3000 series offers the same PoE+ or bypass choice on an I350 for PCIe x4, and the PE-2000 series gives each port its own controller.

The SE-1000 series sits among our PoE PCIe cards, our PCIe frame grabbers and our PCIe expansion cards. Where four Gigabit ports must fit a PCIe x1 slot in a vehicle or cabinet, this is the Vecow series to specify.

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.