UK CAN Bus I/O Modules
CAN Bus I/O Modules for Vehicle and Machine Networks
CAN bus modules let an embedded computer join a CAN 2.0 network for telemetry, engine and drivetrain data, or sensor and actuator control in vehicle, rail, marine and robotics applications.
The range covers isolated dual and quad-port CAN boards for PC/104 and PC/104-Plus hosts, each with 16 digital I/O lines, and a dual-port PCIe MiniCard with latching connectors, all rated for -40 to +85 °C.
New to the protocol? Read what CAN bus is.
Browse Our Range of CAN Bus Cards
- CANbus: 2x Isolated CANbus, DB9
- Power: 3.3V DC [Bus]
- Temp: -40°C to 85°C [-40°F to 185°F]
- CANbus: 2x Isolated CANbus [Board]
- Power: 3.3V DC [Bus]
- Temp: -40°C to 85°C [-40°F to 185°F]
- Certification: RoHS
-
JNMM-2L-XT
JANUS-MM-LP with 2 isolated CAN 2.0B ports, 16 digital I/O and PC/104 -
JNMM-2LP-XT
JANUS-MM-LP with 2 isolated CAN 2.0B ports, 16 digital I/O and PC/104-Plus -
JNMM-4L-XT
JANUS-MM-LP with 4 isolated CAN 2.0B ports, 16 digital I/O and PC/104 -
JNMM-4LP-XT
JANUS-MM-LP with 4 isolated CAN 2.0B ports, 16 digital I/O and PC/104-Plus
- Power: 5V DC [Bus]
- Temp: -40°C to 85°C [-40°F to 185°F]
- CANbus: 2x Isolated CANbus [Board]
Beyond CAN Bus: Data Acquisition and I/O Modules
Analog I/O Modules16-bit analog input and output boards
Digital I/O ModulesGPIO, opto-isolated input and relay output boards
Serial I/O ModulesRS-232/422/485 modules and cards
Ethernet I/O Modules10/100 and Gigabit network modulesData Acquisition and I/O ModulesThe full range by signal type
Power SuppliesPC/104 DC/DC supplies for the stackWhat to Specify in a CAN Bus Module
A CAN bus module connects an embedded computer to vehicle, machine and industrial control networks through a PC/104 stack, Mini PCIe socket or USB port. These are the points to check before you choose one.
Channel Count
One, two or four CAN channels per module. Separate channels keep different vehicle or machine networks apart.
Isolated Channels
Isolated CAN channels protect the computer from ground differences and electrical noise on the bus.
Host Interface
PC/104 and PC/104-Plus for stacks, Mini PCIe for compact computers and USB adapters for laptops and test benches.
Protocols and Firmware
CAN 2.0B on every module, with CANopen firmware on selected adapters for industrial device networks.
Rugged and Military Builds
Latching connectors and MIL-STD tested modules suit military vehicles, heavy machinery and off-highway equipment.
Drivers and Software
Linux drivers on every module and Windows on most, with libraries for logging and sending CAN frames.
CAN Bus Innovation & Vehicle Network Insights
Put Your Computer on the CAN Bus.
Tell us the network, the number of channels and the host board. We will recommend the right CAN module, then configure and test the host computer before it ships.