SabreNet-12000-120 Overview
When sensors, cameras and recorders on a vehicle or mast have to timestamp data against one clock, the switch between them needs to carry time as well as packets. The SabreNet-12000-120 is the timing build of the low-profile models in the Diamond Systems SabreNet-12000 series: a complete rugged Ethernet switch that Diamond builds around its EPS-12000 board-level switch, adding IEEE-1588 PTP support to a MIL-STD-461 filtered supply.
It carries 12 10/100/1000Base-T copper Ethernet ports, arranged in groups of four and eight on two MIL-DTL-38999 connectors, so every link enters the case through a sealed circular connector rather than an RJ-45 socket. Diamond’s embedded IStaX Layer 3 routing and switching software runs on the switch, and you manage it through a web interface on any of the ports or through a local RS-232 port on the four-port connector. Diamond can also customise the software branding and the connector arrangement.
IEEE-1588 PTP support lets the switch take part in network time distribution, and Diamond’s block diagram shows a 1PPS input for a GPS time source on the four-port connector. The Layer 3 software also routes between subnets, which helps where sensor, computer and radio traffic run on separate segments. The SabreNet-12000-100 is the same build without PTP, and the SabreNet-12000-220 keeps PTP but moves to an isolated MIL-grade power supply in a taller case. Our article on synchronising machine vision with IEEE-1588 PTP explains how that shared clock is used.
Power enters through an integrated MIL-STD-461 filter module that accepts 7 to 34 V DC, and this is the short enclosure of the two Diamond offers. The case has an IP67 design and the switch operates from -40 to +85 °C. Inside, an EPSM-10GX switch module sits on a carrier board. Diamond publishes a shock and vibration test report for the SabreNet-12000, and a lab bench-grade external cable kit lets you run the switch on the bench.
SabreNet-12000-120 Specifications
| Overview | |
|---|---|
| Brand & Model | Diamond Systems SabreNet-12000-120 |
| Features | Embedded Fanless Managed Ethernet Switch Rugged |
| I/O | |
| Serial | 1x Serial Ports |
| 1x RS232 [MIL-STD] | |
| Networking | |
| Switching Layer | Layer 3 |
| Switch Type | Managed |
| Ethernet Ports | 12x 10/100/1000 BASE-TX [MIL-STD] |
| Number of Ethernet Ports | 12x Ethernet Ports |
| Networking Standards | IEEE 1588 PTP IEEE 802.1D Spanning Tree Protocol IEEE 802.1Q VLAN IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1X Port-Based Network Access Control IEEE 802.3 10BaseTx Ethernet IEEE 802.3ab 1000BaseTx Gigabit Ethernet IEEE 802.3ad Link Aggregation IEEE 802.3u 100BaseTx Fast Ethernet |
| Power | |
| Power Input | 7-34V DC [MIL-STD] |
| Environmental Conditions | |
| Thermal Dissipation | Fanless Passively Cooled Chassis |
| Operating Temperature | -40°C to 85°C [-40°F to 185°F] |
| Storage Temperature | -40°C to 85°C [-40°F to 185°F] |
| Ingress Protection | IP67 IP67 [Dustproof, Protection against immersion in water up to 1 meter for 30 minutes] |
| Shock | MIL-STD-202G MIL-STD-810G |
| Vibration | MIL-STD-810G |
| EMC | MIL-STD-461G |
| Certification | MIL-STD-461 |
| Mechanical Properties | |
| Chassis Material | Aluminium |
| Dimensions | 163mm x 137mm x 85mm (6.40” x 5.40” x 3.30”) |
Official Diamond Systems UK Distributor
Things Embedded is an official Diamond Systems UK distributor, supplying the SabreNet-12000-120 for UK defence and vehicle programmes. Within the Diamond range the EPS-12000-CM is the board-level route to the same switch core for your own enclosure, and the SABRENET-24000 scales to 24 gigabit ports with 10G uplinks.
The SabreNet-12000-120 sits among our military Ethernet switches and our broader choice of Ethernet switches for demanding sites. Where a sealed 12-port network must share precise time over a filtered 7 to 34 V DC supply, this is the build to specify.
Consult. Design. Integrate.
Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.
Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.