Skip to main content

Vecow PE-9000 Intel E610-XAIT2 10GbE 802.3at PoE+ Frame Grabber Cards with Extended Temperature

The Vecow PE-9000 series is a family of 10GbE PoE+ frame grabber cards on the Intel E610-XAIT2 controller, with two or four 10GBASE-T RJ45 ports, 802.3at PoE+ at up to 25.5 W per port, PCI Express Gen 4 x4, IEEE 1588 PTP and -40 °C to 70 °C operation. The PE-9000 series suits machine vision, inspection and video streaming systems with 10GbE cameras in unheated or hot enclosures.

  • Intel E610-XAIT2 10GbE: Each RJ45 port runs at 10, 5, 2.5 or 1 Gbps or 100 Mbps on the Intel E610-XAIT2 controller.
  • 802.3at PoE+ per Port: Every port supports 802.3af and 802.3at with up to 25.5 W at 48 V DC and PoE on/off control.
  • PCIe 4.0 x4 Interface: A PCI Express Gen 4 x4 host link, with PXE boot, Intel Virtualization Technology and 9728-byte jumbo frames.
  • IEEE 1588 PTP: Precision Time Protocol support helps align timestamps across cameras, with 802.3az Energy Efficient Ethernet on idle links.
  • -40 °C to 70 °C Operation: Rated from -40 °C to 70 °C in operation and -40 °C to 85 °C in storage, on a full-height bracket.
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Description
  • Compare Variants
  • Downloads
UK Support Team: +44 (0)1785 558 300

PE-9000 Description

Many 10GbE camera systems sit in unheated cabinets, roadside housings and outdoor inspection stations, where the card in the host sees much the same cold and heat as the cameras. The Vecow PE-9000 series is built for that envelope: 10GbE PoE+ frame grabber cards on the Intel E610-XAIT2 controller, rated from -40 °C to 70 °C in operation and from -40 °C to 85 °C in storage. We supply each card configured and tested, fitted in the host with the drivers installed and the PoE budget checked against the cameras.

Every PE-9000 card connects to the host over PCI Express Gen 4 x4. The Intel E610-XAIT2 runs each RJ45 port at 10 Gbps, 5 Gbps, 2.5 Gbps, 1 Gbps or 100 Mbps, so a project can mix 10GbE cameras with NBASE-T and Gigabit models on the same card. The controllers support jumbo frames up to 9728 bytes, PXE boot, Intel Virtualization Technology and Intel Ethernet power management, with 802.3az Energy Efficient Ethernet on idle links and IEEE 1588 Precision Time Protocol for time-aligned capture. Each port supports IEEE 802.3af and 802.3at and supplies up to 25.5 W at 48 V DC, with PoE on/off control, and PoE power comes from one 4-pin 12 V connector.

The series has two models. The PE-9002 carries two 10GbE PoE+ ports on one Intel E610-XAIT2 controller, which suits a stereo pair or a two-camera inspection cell. The PE-9004 carries four 10GbE PoE+ ports on two Intel E610-XAIT2 controllers, for four-view inspection or a multi-camera traffic or perimeter position served by one host. Both models share the controller family, bracket and environmental rating, so a project can typically start with two cameras and move to four without changing the driver set in the host image. Where cameras need more than 25.5 W per port, the Vecow PE-6004H series moves to 802.3bt PoE++ on 2.5GbE ports.

Both PE-9000 cards use a full-height bracket and have the same environmental envelope: -40 °C to 70 °C in operation and 5% to 95% humidity non-condensing. Vecow lists Windows 11 and Linux support, and the datasheet shows CE and FCC under EMC with the RoHS mark. Typical deployments include machine vision on production lines, outdoor inspection and video streaming from 10GbE cameras, where the extended temperature range can reduce the heating or cooling the enclosure needs.

PE-9000 Specifications

Overview
Brand & ModelVecow PE-9000
I/O
EthernetSee Variant Specifications
LAN ControllersIntel E610-XAIT2
PoE StandardPoE+ [IEEE 802.3at]
PoE Power Budget25.5W
Power
Power Input12V DC [4-Pin]
Environmental Conditions
Operating Temperature-40°C to 70°C [-40°F to 158°F]
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Humidity5% - 95% (Non-condensing)
CertificationCE
FCC
RoHS
Mechanical Properties
Dimensions168mm x 111mm (6.61" x 4.37")

PE-9000 Variants

Vecow PE-9004 Intel E610-XAIT2 4-Port 10GbE 802.3at PoE+ PCIe Expansion Card with Extended Temperature

PE-9004 with four 10GbE PoE+ RJ45 ports, two Intel E610-XAIT2 and PCIe 4.0 x4

View
Overview
Brand & ModelVecow PE-9004
I/O
Ethernet4x Ethernet Ports
4x 10 GbE LAN [RJ45] [PoE]

Vecow PE-9002 Intel E610-XAIT2 2-Port 10GbE 802.3at PoE+ Frame Grabber Card for -40 to 70 °C

PE-9002 with two 10GbE PoE+ RJ45 ports, Intel E610-XAIT2 and PCIe 4.0 x4

View
Overview
Brand & ModelVecow PE-9002
I/O
Ethernet2x Ethernet Ports
2x 10 GbE LAN [RJ45] [PoE]

No related media available for this product series.

Official Vecow UK Distributor

Things Embedded is an official Vecow UK distributor, and we supply the PE-9000 series tested in the host system it goes into, with drivers installed and the PoE budget checked against the cameras. We also check the 4-pin 12 V PoE feed from the host power supply and the airflow across the slot, so the card is ready for the cameras on delivery. Within the Vecow range, the PE-5004 also carries four 10GbE PoE+ ports, on an Intel XL710 over PCIe 3.0 x8 and rated -25 °C to 55 °C, and the PE-8004MX puts four 10GbE PoE+ ports on X-coded M12 connectors for M12 camera harnesses.

Across our range, the PE-9000 series sits with our frame grabber cards, our PoE frame grabbers and our PCIe expansion cards.

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.