Skip to main content

DFI RPP173 Intel 13th Gen Core Mini-ITX SBCs with 9 to 36 V DC Input and Triple 2.5GbE

The DFI RPP173 series is a family of Mini-ITX SBCs on 13th Gen Intel Raptor Lake processors, from the ten-core Core i7-1365UE to the five-core Intel Processor U300E, with a 9 to 36 V DC input. Every board carries triple 2.5GbE, up to 64 GB DDR5, two DP++ outputs plus USB-C display, four M.2 slots and a PCIe x4 Gen4 slot. The RPP173 series suits 24 V machine cabinets, mobile robots, vehicles and self-service terminals.

  • 9 to 36 V DC Input: Wide-range 9 to 36 V DC on a barrel jack or 4-pin connector runs the board from 12 V, 24 V or battery supplies.
  • Intel 13th Gen Raptor Lake: Ten-core Core i7-1365UE and i5-1345UE, the six-core Core i3-1315UE and the five-core Intel Processor U300E, at up to 28 W TDP.
  • Triple 2.5GbE: Three 2.5GbE ports on Intel I226V and I226LM controllers separate machine, camera and uplink networks on one board.
  • DDR5 and Quad Display: Up to 64 GB DDR5 5200 MHz in two SO-DIMMs, two DP++ outputs at 4K, USB-C DisplayPort Alt Mode and an optional display module.
  • Mini-ITX I/O and Expansion: Four COM ports, 8-bit DIO, four M.2 slots, a PCIe x4 Gen4 slot and CE, FCC, UKCA and RoHS compliance on 170 x 170 mm.
UK Support Team: +44 (0)1785 558 300 Call
Select section
  • Description
  • Compare Variants
  • Downloads
UK Support Team: +44 (0)1785 558 300

RPP173 Description

Plenty of machines and vehicles have no clean 12 V rail. A control cabinet runs from a 24 V DC supply, a mobile robot from a battery pack whose voltage sags under load, and a kiosk from whatever the enclosure builder fitted. The DFI RPP173 series accepts 9 to 36 V DC directly, so a 13th Gen Intel Core Mini-ITX board can sit on those supplies without an extra converter in the cabinet.

The compute matches the RPP171 series. Every RPP173 board takes two DDR5 5200 MHz SO-DIMMs in dual channel, up to 64 GB, and runs its processor at up to 28 W TDP. The Core i7 and i5 builds use Intel Iris Xe Graphics, and the i3 and U300E builds use Intel UHD Graphics. Two DP++ outputs drive up to 4096 x 2304 at 60 Hz, a rear USB-C port adds a third display through DisplayPort Alt Mode, and an M.2 A-key takes DFI’s optional M2A module for an eDP, LVDS, VGA, HDMI or DP panel.

Four builds cover the range. RPP173-IE-1365UE has the ten-core Core i7-1365UE at up to 4.9 GHz for multi-camera robots and inspection vehicles. RPP173-IE-1345UE uses the ten-core Core i5-1345UE at up to 4.6 GHz for HMIs and line controllers on 24 V. Both run from -20 to 70 °C. RPP173-IB-1315UE has the six-core Core i3-1315UE for indoor machine control, and RPP173-IB-U300E uses the five-core Intel Processor U300E for vending machines, kiosks and signage. These two run from -5 to 65 °C.

Each board has three 2.5GbE ports on Intel I226V and I226LM controllers, four rear USB 3.2 Gen 2 ports, four internal USB 2.0 headers, four COM ports (two RS-232/422/485 and two RS-232) and 8-bit DIO. An M.2 M-key runs NVMe at PCIe Gen4 x4, an M.2 B-key with a SIM slot takes a cellular module, an M.2 E-key (2230) takes Wi-Fi, and two SATA 3.0 ports and a PCIe x4 Gen4 slot add drives or an I/O card.

Power arrives on a barrel jack or a 4-pin connector, both rated 9 to 36 V DC. The boards ship with an active cooler as standard, with a fanless heatsink available on request for 15 W builds, and carry CE, FCC, UKCA and RoHS compliance, a discrete TPM, a watchdog programmable from 1 to 255 seconds and Realtek ALC888S audio. DFI lists support for Windows 10 IoT Enterprise LTSB, Windows 11 and Linux. For projects on a fixed 12 V supply, the RPP171 series is the same board with a 12 V input.

RPP173 Specifications

Overview
Brand & ModelDFI RPP173
FeaturesEmbedded
Industrial
Performance
Processor SeriesSee Variant Specifications
Processor ModelsSee Variant Specifications
Performance CoresSee Variant Specifications
Memory2x DDR5 5200MHz SO-DIMM Slots, 64GB
BIOSAMI
Operating SystemLinux
Windows 11
Graphics
Integrated GPUSee Variant Specifications
Display StandardsDP++
Multi Display SupportQuad Display Support
Display Outputs1x USB Type C
2x Display Ports
Audio
InterfaceLine-Out
Mic-In
I/O
Ethernet3x Ethernet Ports
3x 2.5 GbE LAN [RJ45]
LAN ControllersIntel I226LM
Intel I226V
USB9x USB Ports
1x USB 3.2 Gen 2 [Type C]
4x USB 2.0 [Board]
4x USB 3.2 Gen 2 [Type A]
Serial4x Serial Ports
2x RS232 [Board]
2x RS232/422/485 [Board]
Digital I/ODIO [8-lines]
Expansion
M.24x M.2 Expansion Slots
1x M.2 A-Key [Display] [3042]
1x M.2 B-Key [PCIe x1 Gen3/USB 3.2 Gen 2/USB 2.0/SIM] [2242/3042/3052]
1x M.2 E-Key [PCIe x1/USB 2.0] [2230]
1x M.2 M-Key [PCIe x4 Gen4] [2242/2280]
PCIe1x PCIe Slots
1x PCIe [x4 Slot] [Gen4]
SIM Slots1x SIM Slots
Wireless ConnectivityOptional 4G Modem
Optional WiFi/Bluetooth
Storage
Storage1x M.2 SSD
2x SATA Ports
NVMeNVMe SSD Support
Power
Power Input9-36V DC [4-Pin]
9-36V DC [Barrel Connector]
Environmental Conditions
Operating TemperatureSee Variant Specifications
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Humidity5% - 95% (Non-condensing)
CertificationCE
FCC
RoHS
UKCA
Mechanical Properties
Dimensions170mm x 170mm (6.69" x 6.69")

RPP173 Variants

DFI RPP173-IB-U300E Intel Processor U300E Mini-ITX Embedded Motherboard with 9 to 36 V DC Input and Triple 2.5GbE

RPP173 with Intel Processor U300E, five cores, 9 to 36~V DC and triple 2.5GbE

View
Overview
Brand & ModelDFI RPP173-IB-U300E
Performance
Processor SeriesProcessor Series Raptor Lake
Processor ModelsU300E
Performance Cores5
Graphics
Integrated GPUIntel UHD Series
Environmental Conditions
Operating Temperature-5°C to 65°C [23°F to 149°F]
Overview
Brand & ModelDFI RPP173-IB-1315UE
Performance
Processor Series13th Gen Raptor Lake
Processor Modelsi3-1315UE
Performance Cores6
Graphics
Integrated GPUIntel UHD Series
Environmental Conditions
Operating Temperature-5°C to 65°C [23°F to 149°F]
Overview
Brand & ModelDFI RPP173-IE-1345UE
Performance
Processor Series13th Gen Raptor Lake
Processor Modelsi5-1345UE
Performance Cores10
Graphics
Integrated GPUIntel Iris Xe Series
Environmental Conditions
Operating Temperature-20°C to 70°C [-4°F to 158°F], Extended Temperature
I/O
Remote ManagementIntel vPro

DFI RPP173-IE-1365UE Intel Core i7-1365UE Mini-ITX SBC with 9 to 36 V DC Input and Wide Temperature

RPP173 with Intel Core i7-1365UE, 9 to 36~V DC and -20 to 70~°C

View
Overview
Brand & ModelDFI RPP173-IE-1365UE
Performance
Processor Series13th Gen Raptor Lake
Processor Modelsi7-1365UE
Performance Cores10
Graphics
Integrated GPUIntel Iris Xe Series
Environmental Conditions
Operating Temperature-20°C to 70°C [-4°F to 158°F], Extended Temperature
I/O
Remote ManagementIntel vPro

No related media available for this product series.

Official DFI UK Distributor

Things Embedded is an official DFI UK distributor, supplying the RPP173 series configured with memory, storage, wireless and an OS image, fitted with its cooling and tested before it ships. RPP171 is the same Raptor Lake board with a single 12 V DC input, where the supply is already regulated. PTH173 brings Intel Core Ultra Series 3 (Panther Lake) processors to an industrial Mini-ITX board, and EHL173 is the Intel Elkhart Lake Mini-ITX board on 9 to 36 V for lower-power designs already qualified on that generation. Our team can advise on processor choice against the workload, supply and wiring for vehicles and 24 V cabinets, memory and storage sizing, and cellular and Wi-Fi modules for the M.2 slots.

For other sizes and processors, browse our industrial Mini-ITX motherboards, the wider range of embedded boards and our Intel Raptor Lake boards and systems. The -20 to 70 °C Core i7 and i5 builds also sit with our wide temperature computers, next to boxed systems rated for unheated cabinets and vehicles.

Consult. Design. Integrate.

Things Embedded is a leading UK supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.