Skip to main content
Contact Us
Antaira

Antaira LMP-0501-S3-T-V2 5-Port 10/100 Managed Industrial Ethernet Switch with 4x PoE+, 1x 100FX SC Single-mode Fiber and Extended Temperature

The LMP-0501-S3-T-V2 is the single-mode SC fiber, extended temperature build of the Antaira LMP-0501-V2 series: a Layer 2 managed switch with four 30 W PoE+ ports, one 100Base-FX port to 30 km, 48 to 55 V DC input and a -40 °C to 75 °C rating, for outdoor SCADA and surveillance links.

  • Extended Temperature Rating: Rated from -40 °C to 75 °C in an IP30 metal DIN-rail housing for unheated outdoor cabinets, with Antaira’s 5-year warranty.
  • 100Base-FX Single-Mode SC Fibre: One 100Base-FX single-mode port with an SC connector carries the uplink up to 30 km, clear of electrical noise.
  • Four PoE+ Ports at 30W: Four 10/100Base-TX IEEE 802.3af/at ports supply up to 30 W each from a 120 W total PoE budget.
  • ERPS Ring Under 50ms: ITU-T G.8032 ERPS recovers a broken ring in under 50 ms, with STP, RSTP and MSTP also supported.
  • Layer 2 Management: VLANs, QoS, IGMP snooping, LACP, SNMP v3, RMON and Modbus TCP, plus static routes and DHCP Option 82.
View LMP-0501-V2 Series
Thermal Dissipation: FanlessFanless
Operating Temperature: Extended TemperatureExtended Temp
Certification: CECE
Certification: FCCFCC
USA Support Team: +1 407 214 9446 Call
Select section
  • Overview
  • Specifications
  • Downloads

LMP-0501-S3-T-V2 Overview

Single-mode fiber carries a link far enough to bring a remote SCADA site or surveillance point back to a control room without a repeater. The LMP-0501-S3-T-V2 is a Layer 2 managed industrial PoE switch in the Antaira LMP-0501-V2 series series, with four PoE+ copper ports and one 100Base-FX single-mode SC fiber port for links up to 30 km, rated -40 °C to 75 °C for outdoor enclosures.

Its four 10/100Base-TX RJ45 ports support IEEE 802.3af/at at up to 30 W per port, from a 120 W PoE budget. Management covers IEEE 802.1Q VLANs, QoS with 802.1p, CoS/ToS and DSCP, IGMP v1/v2/v3 for up to 1024 groups, LACP, and SNMP v1/v2c/v3 with RMON and Modbus TCP. Ring redundancy uses ITU-T G.8032 ERPS with recovery under 50 ms, alongside STP, RSTP and MSTP, and it also handles static routes and DHCP Option 82. Set-up is by web console, CLI or RS232 console, with HTTPS, SSH and 802.1X for secure access.

Redundant 48 to 55 V DC inputs connect through a removable 6-contact terminal block, with reverse polarity and overload current protection and a relay contact rated 1 A at 24 V DC for alarms. The system draws 7.5 W before PoE. A PoE ping alarm can power-recycle a port, and USB configuration backup and dual firmware images ease recovery. Immunity is tested to IEC 61000-4-2, -3, -4, -5, -6 and -8.

The LMP-0501-S3-T-V2 sits in an IP30 metal housing for DIN rail or optional wall mounting and is tested for shock, vibration and free fall to IEC 60068-2-27, -2-6 and -2-32. It carries FCC and CE marks, is RoHS compliant and comes with Antaira’s 5-year warranty. Antaira names power and utility, water, oil and gas, factory automation and ITS among its uses. The LMP-0501-S3-V2 is the same switch rated -10 °C to 70 °C, the LMP-0501-M-T-V2 swaps to multi-mode fiber for links up to 2 km, and the LMP-0501-S3-24-T-V2 takes a 12 to 55 V DC input for lower-voltage supplies. We can pre-configure IP addressing, VLANs and ring settings before the switch ships.

LMP-0501-S3-T-V2 Specifications

Overview
Brand & ModelAntaira LMP-0501-S3-T-V2
FeaturesFanless
Industrial
Managed Ethernet Switch
Networking
Switching LayerLayer 2+
Switch TypeManaged
Ethernet Ports4x 10/100 BASE-TX [PoE+] [RJ45]
Number of Ethernet Ports4x Ethernet Ports
PoE StandardPoE+ 30W [802.3at]
PoE Power Budget120W
Number of Fiber Ports1x 100FX [SC] [Single-mode]
Networking StandardsIEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1X Port-Based Network Access Control
IEEE 802.3 10BaseTx Ethernet
IEEE 802.3ad Link Aggregation
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3u 100BaseTx Fast Ethernet
IEEE 802.3x Back Pressure Flow Control
ITU-T G.8032 ERPS
Power
Power Input48-55V DC, Terminal Block
Environmental Conditions
Operating Temperature-40°C to 75°C [-40°F to 167°F]
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Humidity5% - 95% (Non-condensing)
Ingress ProtectionIP30
ShockIEC 60068-2-27
VibrationIEC 60068-2-6
CertificationCE
FCC
RoHS
Mechanical Properties
Weight0.9 Kg (1.9 Lbs)
Dimensions54mm x 142mm x 99mm (2.13" x 5.59" x 3.9")
Mounting OptionsDIN Mount
Wall Mount

Official Antaira USA Distributor

Things Embedded is an official Antaira USA distributor, and we supply the LMP-0501-S3-T-V2 with a matching DIN-rail power supply, with IP addressing, VLANs and ring settings pre-configured on request. Within the Antaira range, the LMP-0501-S3-V2 the same switch rated -10 °C to 70 °C.

Across our range, the LMP-0501-S3-T-V2 sits with our managed industrial switches, PoE+ switches for industrial sites and DIN-rail network switches.

Shop Antaira

Consult. Design. Integrate.

Things Embedded is a leading USA supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.

Services
Send Inquiry