Skip to main content
Contact Us
Antaira

Antaira LMP-0702G-SFP-bt-T-V2 7-Port Gigabit Managed PoE++ Switch with 4x PoE++ (240W), 2x SFP and Extended Temperature

The LMP-0702G-SFP-bt-T-V2 is the extended temperature build of the Antaira LMP-0702G-SFP-bt-V2 series: four gigabit IEEE 802.3bt PoE++ ports at up to 90 W, 240 W in total, and two SFP slots, rated -40 °C to 75 °C for outdoor high-draw surveillance devices.

  • Extended Temperature Build: Rated -40 °C to 75 °C for unheated outdoor enclosures, with the same four 90 W PoE++ ports and twin SFP slots.
  • Four 90 W PoE++ Ports: Four gigabit IEEE 802.3bt PoE++ ports at up to 90 W from a 240 W budget, in Mode A, Mode B or 4-pair.
  • G.8032 ERPS Ring Recovery: ITU-T G.8032 ERPS restores a broken ring in under 50 ms, with STP, RSTP and MSTP also supported.
  • Layer 2+ Management: VLANs, QoS, IGMP v1/v2/v3 multicast filtering, LACP, SNMP v3 and Modbus TCP, plus static routes and DHCP Option 82.
  • Redundant DC Input and Relay: Redundant 48 V to 55 V DC inputs on a 6-pin terminal block, a 24 V DC relay contact and FCC and CE approvals.
View LMP-0702G-SFP-bt-V2 Series
Thermal Dissipation: FanlessFanless
Operating Temperature: Extended TemperatureExtended Temp
Certification: CECE
Certification: FCCFCC
USA Support Team: +1 407 214 9446 Call
Select section
  • Overview
  • Specifications
  • Downloads

LMP-0702G-SFP-bt-T-V2 Overview

Some surveillance and outdoor devices draw more than the 30 W that PoE+ can deliver down one cable. The LMP-0702G-SFP-bt-T-V2 is the extended temperature build in the Antaira LMP-0702G-SFP-bt-V2 series: a gigabit managed PoE++ switch with four IEEE 802.3bt ports at up to 90 W each, one more gigabit RJ45 port and two SFP slots for fiber.

It has five 10/100/1000Base-TX RJ45 ports, with IEEE 802.3bt PoE++ at up to 90 W on ports one to four from a 240 W budget in Mode A, Mode B or 4-pair, plus two 100/1000 dual-rate SFP slots. Switching runs on a 14 Gbps store-and-forward fabric with an 8K MAC table. Management is Layer 2+, with IEEE 802.1Q VLANs, QoS, IGMP v1/v2/v3 multicast filtering, LACP and SNMP v1/v2c/v3, plus static routes and DHCP Option 82. ITU-T G.8032 ERPS restores a broken ring in under 50 ms, STP, RSTP and MSTP are supported, and Modbus TCP lets a SCADA system monitor the switch. Set-up is by web console, Telnet or CLI, with HTTPS, SSH and IEEE 802.1X for secure access.

Power comes in on 48 V to 55 V DC redundant inputs through a removable 6-pin terminal block, so a second supply can take over if the first fails; full IEEE 802.3bt output needs a 53 V to 55 V DC supply. Reverse polarity, overload current, EFT and ESD protection are built in, and a 24 V DC, 1 A relay contact can flag a power loss or fault to a PLC or alarm panel.

The LMP-0702G-SFP-bt-T-V2 is rated -40 °C to 75 °C, for unheated outdoor enclosures on ITS, utility and surveillance sites. It has an IP30 metal housing for DIN-rail or wall mounting and is designed to IEC 60068-2-27 shock and IEC 60068-2-6 vibration. Antaira lists FCC and CE certifications with RoHS compliance, and the switch carries Antaira’s 5-year warranty. The LMP-0702G-SFP-bt-V2 is the same switch rated -10 °C to 65 °C, and the LMP-0702G-SFP-bt-24-T-V2 adds a 12 V to 55 V DC input at the same extended range. We supply the LMP-0702G-SFP-bt-T-V2 and can pre-configure IP addressing, VLANs and ring settings.

LMP-0702G-SFP-bt-T-V2 Specifications

Overview
Brand & ModelAntaira LMP-0702G-SFP-bt-T-V2
FeaturesFanless
Industrial
Managed Ethernet Switch
Networking
Switching LayerLayer 2+
Switch TypeManaged
Ethernet Ports1x 10/100/1000 BASE-TX [RJ45]
4x 10/100/1000 BASE-TX [PoE++] [RJ45]
Number of Ethernet Ports5x Ethernet Ports
PoE StandardPoE++ 90W [802.3bt]
PoE Power Budget240W
Number of Fiber Ports2x 100/1000 [SFP]
Networking StandardsIEEE 802.1AB LLDP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1X Port-Based Network Access Control
IEEE 802.3 10BaseTx Ethernet
IEEE 802.3ab 1000BaseTx Gigabit Ethernet
IEEE 802.3ad Link Aggregation
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3bt Power over Ethernet
IEEE 802.3u 100BaseTx Fast Ethernet
IEEE 802.3x Back Pressure Flow Control
IEEE 802.3z Gigabit Fiber
ITU-T G.8032 ERPS
Power
Power Input48-55V DC, Terminal Block
Environmental Conditions
Operating Temperature-40°C to 75°C [-40°F to 167°F]
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Humidity5% - 95% (Non-condensing)
Ingress ProtectionIP30
ShockIEC 60068-2-27
VibrationIEC 60068-2-6
CertificationCE
FCC
RoHS
Mechanical Properties
Weight1.0 Kg (2.3 Lbs)
Dimensions54mm x 142mm x 99mm (2.13" x 5.59" x 3.9")
Mounting OptionsDIN Mount
Wall Mount

Official Antaira USA Distributor

Things Embedded is an official Antaira USA distributor, and we supply the LMP-0702G-SFP-bt-T-V2 with matching SFP transceivers and a DIN-rail power supply, with IP addressing, VLANs and ring settings pre-configured on request. Within the Antaira range, the LMP-0702G-SFP-bt-V2 standard temperature build rated -10 °C to 65 °C.

Across our range, the LMP-0702G-SFP-bt-T-V2 sits with our industrial PoE switches, managed industrial switches and industrial Ethernet switches.

Shop Antaira

Consult. Design. Integrate.

Things Embedded is a leading USA supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.

Services
Send Inquiry