Skip to main content
Loading...

Antaira LMP-2004G-SFP-T 20-Port Gigabit Managed DIN Rail Switch with 16x PoE+ (240W), 4x SFP and -40 to 75 °C

The LMP-2004G-SFP-T is the extended temperature build of the Antaira LMP-2004G-SFP series: a 20-port Light Layer 3 managed switch with sixteen 30 W PoE+ ports on a 240 W budget and four 100/1000 SFP slots, rated -40 °C to 75 °C. It suits unheated outdoor cabinets that join a fiber ring and power many devices.

  • -40 °C to 75 °C Operation: The extended temperature rating keeps 16 PoE+ ports and four fiber links running in unheated outdoor cabinets year round.
  • Four Dual-Rate SFP Slots: Four 100/1000 SFP slots cover two ring links plus two fiber branches or uplinks, with single-mode or multi-mode modules.
  • Sixteen 30 W PoE+ Ports: Sixteen 10/100/1000 RJ45 ports to IEEE 802.3at/af supply up to 30 W each from a shared 240 W budget.
  • Light Layer 3 and G.8032: Static routes and DHCP Options 66, 67 and 82, with ERPS ring recovery under 50 ms and STP, RSTP, MSTP.
  • IEC 61850-3 and NEMA TS2: Antaira lists IEC 61850-3 Edition 2.0 for substations, NEMA TS2 and UL 61010-1 alongside FCC and CE.
Thermal Dissipation: FanlessFanless
Operating Temperature: Extended TemperatureExtended Temp
Certification: CECE
Certification: FCCFCC
USA Support Team: +1 407 214 9446 Call
Select section
  • Overview
  • Specifications
  • Downloads

LMP-2004G-SFP-T Overview

Outdoor cabinets that power a large group of devices and also join a fiber ring often need more than two fiber ports, and they rarely have heating. The LMP-2004G-SFP-T is the extended temperature model in the Antaira LMP-2004G-SFP series, a 20-port Light Layer 3 managed industrial PoE+ switch rated -40 °C to 75 °C.

Sixteen 10/100/1000 RJ45 ports support IEEE 802.3at/af PoE+ at up to 30 W per port from a 240 W total budget, and four 100/1000 SFP slots leave room for two ring links plus two more fiber branches or uplinks. IPv4/IPv6 and DHCP Options 66, 67 and 82 are supported. Store-and-forward switching runs on a 40 Gbps fabric with an 8K MAC table and 9.6K jumbo frames. The Light Layer 3 firmware adds static routes and DHCP Option 82 to 802.1Q VLANs, QoS, IGMP v1/v2 snooping, LACP and Modbus TCP, and ITU-T G.8032 ERPS restores the ring in under 50 ms, with STP, RSTP and MSTP as alternatives.

Power comes in on redundant 48 to 55 V DC inputs through removable terminal blocks, with overload current and reverse polarity protection. The switch draws 18.4 W itself, and a 24 V DC, 1 A relay contact and system warnings flag a lost supply or port fault. Security covers 802.1X, SNMPv3, HTTPS, SSH and port lock, and an RS232 console and USB configuration backup make a replacement unit quick to load.

The LMP-2004G-SFP-T runs fanless in an IP30 metal case for DIN-rail or wall mounting. Antaira lists FCC, CE, UL 61010-1 and NEMA TS2 approvals, with IEC 61850-3 Edition 2.0 for substation use, and covers it with its 5-year warranty. The LMP-2004G-SFP is the -10 °C to 70 °C model for heated cabinets, and the LMX-2004G-SFP-T offers the same ports without PoE. We supply and specify the switch, and can pre-configure IP addressing, VLANs and ring settings on request.

LMP-2004G-SFP-T Specifications

Overview
Brand & ModelAntaira LMP-2004G-SFP-T
FeaturesFanless
Industrial
Managed Ethernet Switch
Networking
Switching LayerLayer 2+
Switch TypeManaged
Ethernet Ports16x 10/100/1000 BASE-TX [PoE+] [RJ45]
Number of Ethernet Ports16x Ethernet Ports
PoE StandardPoE+ 30W [802.3at]
PoE Power Budget240W
Number of Fiber Ports4x 100/1000 [SFP]
Networking StandardsIEEE 802.1AB LLDP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1X Port-Based Network Access Control
IEEE 802.3 10BaseTx Ethernet
IEEE 802.3ab 1000BaseTx Gigabit Ethernet
IEEE 802.3ad Link Aggregation
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3u 100BaseTx Fast Ethernet
IEEE 802.3x Back Pressure Flow Control
IEEE 802.3z Gigabit Fiber
ITU-T G.8032 ERPS
Power
Power Input48-55V DC, Terminal Block
Environmental Conditions
Operating Temperature-40°C to 75°C [-40°F to 167°F]
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Humidity5% - 95% (Non-condensing)
Ingress ProtectionIP30
ShockIEC 60068-2-27
VibrationIEC 60068-2-6
CertificationCE
FCC
IEC 61850-3
NEMA TS2
RoHS
UL 61010-1
Mechanical Properties
Weight1.2 Kg (2.7 Lbs)
Dimensions67mm x 142mm x 99mm (2.64" x 5.59" x 3.90")
Mounting OptionsDIN Mount
Wall Mount

Official Antaira USA Distributor

Things Embedded is an official Antaira USA distributor, and we supply the LMP-2004G-SFP-T with matching SFP transceivers and a DIN-rail power supply, with IP addressing, VLANs and ring settings pre-configured on request. Within the Antaira range, the LMP-2004G-SFP standard temperature build rated -10 °C to 70 °C for heated cabinets.

Across our range, the LMP-2004G-SFP-T sits with our PoE switches for industrial sites, managed industrial switches and industrial Ethernet switches.

Consult. Design. Integrate.

Things Embedded is a leading USA supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.