Arestech PPC-1964R 19″ Resistive Fanless Panel PC with Intel Celeron J6412 and Front IP54

Supervisory stations and self-service points need more screen area than a machine HMI, with the computer built in behind it. For gloved hands or a stylus, pressure-based 5-wire resistive touch is usually the safer choice. The PPC-1964R is the 5-wire resistive build in the Arestech PPC-1964 series: a 19″ fanless panel PC on the Intel Celeron J6412 with an SXGA display and a front panel sealed to IP54.

The Intel Celeron J6412 runs at up to 2.60 GHz with dual-channel DDR4 3200 up to 32 GB, which suits HMI runtimes, kiosk software and dashboards where low power matters more than raw processing. Storage is a 2.5″ SSD plus an M.2 2280 socket with PCIe x2 or SATA. On the PPC-1964R, the 19 inch display is an SXGA LCD at 1280 x 1024 in 5:4, with 350 nits brightness, a 1000:1 contrast ratio and 170° horizontal and 160° vertical viewing angles. The 5-wire resistive touch screen has a 3 Mohs surface and 80% transparency.

Two GbE ports on Intel I211-AT controllers sit alongside two HDMI 2.0 outputs, four USB 3.2 Gen 1 ports and line-out audio. Serial is optional, with two RS-232/422/485 ports available for PLCs or instruments, and a full-size Mini-PCIe socket with a SIM slot takes an optional 4G LTE or Wi-Fi module. The PPC-1964P is the same build with projected capacitive touch, and the PPC-1912R pairs the same 19″ screen with the Intel Core i5-1235U, adding 2.5GbE, USB 3.2 Gen 2 and a serial port as standard.

Power is 12 to 36 V DC on a 2-pin terminal block with AT and ATX modes. The PPC-1964R is fanless, runs from -20 °C to 60 °C and is tested to IEC 60068-2-64 vibration and IEC 60068-2-27 shock, with CE and FCC Class A marks. Its SECC steel front panel is rated IP54 against dust and splashing water, and it mounts on VESA or in a panel cut-out. We supply it configured, with Windows 11 IoT or Linux installed, and tested.