Skip to main content
Contact Us
Arestech

Arestech SM-119/VM-2100 19″ Non-Touch Sunlight Readable Monitor with 1,600 Nit SXGA LCD and Front IP65

The SM-119/VM-2100 is the non-touch build in the Arestech SM-119(P)(R)/VM-2100 series: a 19 inch, 1,600 nit sunlight readable LCD with no touch layer over the panel. It suits camera feeds, status boards and machine displays in bright light, where operators read the screen but control the process elsewhere.

  • No Touch Layer: Non-touch 19″ build for camera views, dashboards and status screens that are read rather than pressed, adjusted from the OSD keys.
  • 1,600 Nit Sunlight Readable LCD: 5:4 SXGA LCD at 1280 x 1024 with 1,600 nits and 1000:1 contrast, readable through cab windows and in open-sided halls.
  • VGA, DVI and DisplayPort Inputs: Three video inputs on the VM-2100 module, so the monitor connects to older controllers and current industrial PCs alike.
  • Ignition-Sensing DC Input: 9 to 48 V DC terminal-block power with ignition sensing and a PC/Car mode switch for vehicle and machine installs.
  • Front IP65 in Die-Cast Aluminium: Front panel IP65 compliant with operation from -10 °C to 60 °C, for panel, VESA or wall mounting.
View SM-119(P)(R)/VM-2100 Series
Display Brightness: High BrightHigh Bright
Ignition Sensing: Supports Ignition ControlIgnition Control
Thermal Dissipation: FanlessFanless
Ingress Protection: Front IP65Front IP65
Certification: CECE
Certification: FCCFCC
USA Support Team: +1 407 214 9446 Call
Select section
  • Overview
  • Specifications
  • Downloads

SM-119/VM-2100 Overview

Not every screen on a machine or vehicle needs to be touched. Camera feeds, line dashboards and status displays are read at a glance, often in daylight, and a touch layer only adds a surface between the panel and the viewer. The SM-119/VM-2100 is the non-touch configuration in the Arestech SM-119(P)(R)/VM-2100 series: a 19 inch sunlight readable LCD at 1,600 nits in a front IP65 aluminum die-cast bezel.

The panel is a 5:4 SXGA LCD at 1280 x 1024 with a 1000:1 contrast ratio and 170° horizontal and 160° vertical viewing angles, so the image holds its contrast for operators standing off to one side. At 1,600 nits it stays legible where a typical industrial display fades, which suits control desks, operator stations and outdoor kiosks. The multi-language on-screen display has Menu, Auto and Up/Down keys, and a remote OSD connector lets the screen be adjusted from a separate keypad once it is sealed into a panel.

Arestech’s VM-2100 video module on the rear takes VGA, DVI and DisplayPort, with USB 2.0 and COM ports, a line-in for two 2 W internal speakers, a two-pin terminal block for remote power on/off and a remote OSD connector, so the SM-119/VM-2100 connects to older controllers as easily as current industrial PCs. Where the same screen needs input, the SM-119P/VM-2100 adds projected capacitive touch and the SM-119R/VM-2100 a 5-wire resistive touch screen.

Power is 9 to 48 V DC on a three-pin terminal block with ignition sensing and a PC/Car mode switch, protected against over-voltage to 52 V, reverse voltage to -48 V and over-current to 20 A, with an optional 12 V, 90 W adapter for mains sites. The SM-119/VM-2100 runs from -10 °C to 60 °C, is rated for 20 Grms shock and 1.5 Grms vibration from 5 to 500 Hz, and fits a 442.5 x 367.5 mm panel cut-out or a 100 x 100 mm VESA mount.

SM-119/VM-2100 Specifications

Overview
Brand & ModelArestech SM-119/VM-2100
FeaturesFanless
Industrial
Display
Display19"[5:4, 1280 x 1024, SXGA]
Touch Screen HardnessIK07
Display TreatmentProtective Glass
Brightness1,600 Nits
Viewing AngleWide Viewing Angle
170° Horizontal, 160° Vertical
Aspect Ratio5:4
FormatStandard
Contrast1000:1
Number of Display Inputs3x Display Ports
Video Inputs1x Display Port Input
1x DVI Input
1x VGA Input
Power
Power Input9-48V DC Input, Terminal Block
Optional AC Power Supply
Ignition SensingSupports Ignition Control
Environmental Conditions
Thermal DissipationFanless Passively Cooled Chassis
Operating Temperature-10°C to 50°C [14°F to 122°F]
Storage Temperature-20°C to 70°C [-4°F to 158°F]
Humidity10-80% (Non-condensing)
Ingress ProtectionFront IP65
Front IP65 [Dustproof, Protection against low pressure water jets spraying from the front side]
CertificationCE
FCC
Mechanical Properties
Weight6.6Kg (14.55Lbs)
Dimensions450mm x 374mm x 77mm (17.72" x 14.72" x 3.03")

Official Arestech USA Distributor

Things Embedded is an official Arestech USA distributor, supplying the SM-119/VM-2100 configured and tested for USA vehicle, yard and machine installs. Within the Arestech range the DM-119P/VM-2100 offers a 19 inch PCAP touch monitor at standard brightness, and the SM-117(P)(R)/VM-2100 is the same SM build at 17 inches.

As a non-touch build the SM-119/VM-2100 sits among our high brightness monitors, our industrial panel mount monitors and our VESA mount industrial monitors. Where the screen is read in daylight, driven from a controller or PC elsewhere and never pressed, this is the configuration of the SM-119(P)(R)/VM-2100 series to specify.

Shop Arestech

Consult. Design. Integrate.

Things Embedded is a leading USA supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.

Services
Send Inquiry