DFI PR810-C622IRV 1st and 2nd Gen Intel Xeon Scalable EATX Dual CPU Motherboard with C622 Chipset, VGA Output and Dual 10GbE

A medical imaging or simulation server often sits in an equipment room where engineers want a local screen during installation and service. The PR810-C622IRV is the VGA build in the DFI PR810 series of dual-socket EATX server motherboards, with DFI’s SEM2510-VGA module fitted for a rear VGA output at up to 1920 x 1200.

Two LGA 3647 sockets take 1st and 2nd Gen Intel Xeon Scalable processors on the Intel C622 chipset, each from eight to 24 cores at up to 150 W TDP. DFI lists 31 models, so a pair of 12-core Gold 6126 processors can suit a moderate load and two 24-core Gold 6252N processors a heavy one. Twelve DDR4 RDIMM slots hold up to 768 GB of registered ECC memory at up to 2933 MHz, with Intel DC Persistent Memory support.

Networking is two 10GbE ports on an Intel X557-AT2 and two GbE ports on Intel I210AT controllers, and DFI provides a slot for its optional EXT-100GbE module. The rear panel has four USB 3.1 Gen 1 ports, with two USB 3.1 Gen 1 and three USB 2.0 inside, plus an RS-232 DB9 and an RS-232 header. Four PCIe x16 slots and one open-ended PCIe x8 slot, all Gen3, take GPUs and capture cards, and a PCI slot through a bridge takes a legacy card. Storage is an M.2 2280 NVMe or SATA slot and eight SATA 3.0 ports with RAID 0, 1, 5 and 10.

Power comes from an ATX supply on 24-pin and 8-pin connectors, with an operating range of 0 to 40 °C and CE, FCC, UKCA and RoHS compliance. PR810-C622IR is the headless build without a module, and PR810-C622IRI adds IPMI remote management to the PR810-C622IRV’s VGA output.