US 
Diamond Systems EPS-24G4X-L3 Rugged Layer 3 Managed 24 Port Gigabit Ethernet Switch with 4 10G SFP+ Ports
Extended TempEPS-24G4X-L3 Overview
Once a vehicle or rugged network is split into several subnets, traffic between them needs routing, and a separate router adds space, power and another unit to qualify. The EPS-24G4X-L3 is the Layer 3 build in the Diamond Systems EPS-24G4X series: a managed Ethernet switch board that Diamond designed for vehicle and other rugged environments, running routing and switching on the same board.
It carries 24 10/100/1000 Mbps copper ports with non-blocking wire-speed performance and four 10G SFI ports on SFP+ sockets, with 4 MB of packet memory. Diamond’s Layer 3 routing and switching software runs on the board, and every feature is manageable through a web GUI over any port, a command language on the built-in RS-232 port or SNMP v1/v2c/v3. Customer branding can add your logo, color scheme and part numbers to the GUI and serial interface.
On top of the Layer 2+ set of 8K MAC addresses, 4K IEEE 802.1Q VLANs, IEEE 802.3ad link aggregation, RSTP and MSTP, the Layer 3 package adds hardware- and software-based IPv6 static routing, RFC 2328 OSPFv2 dynamic routing, RADIUS accounting and port and queue policers. The EPS-24G4X is the Layer 2+ build, and the EPS-24G4X-1588 adds an IEEE-1588 PTP clock circuit. Our comparison of Layer 2 and Layer 3 switches sets out when routing belongs in the switch.
At 24 V input the board draws 13 W with all ports idle, 20 W with all 24 copper ports active and 26 W with every port active, from a wide-range supply with built-in transient protection. It is rated down to -40 °C, with latching I/O connectors and MIL-STD-202G shock and vibration resistance. Cooling comes from two heat sinks on the switch module assembly. The board is part of the EPSM-10GX4 development kit, whose schematics and bill of materials support custom carrier designs.
EPS-24G4X-L3 Specifications
| Overview | |
|---|---|
| Brand & Model | Diamond Systems EPS-24G4X-L3 |
| Features | Compact Embedded Fanless Industrial Managed Ethernet Switch Rugged |
| I/O | |
| Serial | 1x Serial Ports |
| 1x RS232 [Board] | |
| Networking | |
| Switching Layer | Layer 3 |
| Switch Type | Managed |
| Ethernet Ports | 24x 10/100/1000 BASE-TX [Latching] |
| Number of Ethernet Ports | 24x Ethernet Ports |
| Number of Fiber Ports | 4x 10G [SFP+] |
| Networking Standards | IEEE 802.1D Spanning Tree Protocol IEEE 802.1Q VLAN IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1X Port-Based Network Access Control IEEE 802.3 10BaseTx Ethernet IEEE 802.3ab 1000BaseTx Gigabit Ethernet IEEE 802.3ad Link Aggregation IEEE 802.3ae 10 Gigabit Fiber IEEE 802.3u 100BaseTx Fast Ethernet |
| Power | |
| Power Input | 7-40V DC [Latching] |
| Environmental Conditions | |
| Operating Temperature | -40°C to 80°C [-40°F to 176°F] |
| Certification | RoHS |
| Mechanical Properties | |
| Weight | 0.4 Kg (0.9 Lbs) |
| Dimensions | 107mm x 156mm (4.21" x 6.14") |
| Number of Ports | 24 10/100/1000Mbps Ethernet ports with non-blocking wire-speed performance 4 10G SFP+ ports |
| Power Management | ActiPHY and PerfectReach power management reduce power for shorter cable lengths and shut down power to disconnected ports |
| Operating temperature | -40 to +80°C |
| Weight | 389g / 13.7oz |
| RohS | Compliant |
| Implementation | 2-board solution: EPSM-10GX4 switch module provides core switch function and 12 PHYs; additional 12 PHYs and remaining circuitry implemented on carrier board |
| On-board Memory | 4MB packet memory |
| Network Management | SNMP v1/v2c/v3; Web GUI and command line interface (CLI) |
| Serial Port | 1 RS-232 port for host interface, 38400/N/8/1 |
| Indicator lights | LEDs for each port indicate link status and speed |
| Dimensions | 107 x 156mm / 4.213 x 6.142″ |
| Input voltage | 7-40VDC |
| Power consumption | Vin = 24VDC: 13W, all ports idle 20W, all 24 1G ports active 26W, all 24G ports and all 4 10G ports active |
Official Diamond Systems USA Distributor
Things Embedded is an official Diamond Systems USA distributor, supplying the EPS-24G4X-L3 for USA defense and transport programs. Within the Diamond range the EPS-9600 is another Diamond Layer 3 Ethernet switch board, and the EPSM-10GX4 module is the switch core for teams designing their own carrier.
With Layer 3 routing the EPS-24G4X-L3 sits among our embedded Ethernet switches, our board-level Ethernet switches and our Ethernet switches. Where a rugged network needs routing between subnets as well as 10G uplinks, this is the build to specify.
Consult. Design. Integrate.
Things Embedded is a leading USA supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.
Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.