Skip to main content
Loading...

Diamond Systems ZETA : ZETA-E3940-8G064A Rugged Ultra Compact Type 10 COM Express SBC with DAQ

The ZETA-E3940-8G064A is the Atom E3940 data acquisition build in the Diamond Systems ZETA series, a COM Express SBC with 8 GB of RAM, 64 GB of eMMC and 16 analog inputs on a COM Express Mini Type 10 board. It suits vehicle and airborne systems that need analog measurement without a separate I/O module.

  • Intel Atom E3940: Quad-core Apollo Lake processor at 1.6 GHz with 8 GB of RAM and 64 GB of eMMC on the COM Express Mini module.
  • 16-Bit Analog Inputs: 16 single-ended or eight differential inputs at up to 100 kHz aggregate, with ranges up to ±10 V and a 2048-sample FIFO.
  • Analog Outputs and Counters: Four 16-bit analog outputs with a waveform generator, 27 digital I/O lines, eight 32-bit counter/timers and four 24-bit PWMs.
  • Dual GbE and Four Serial Ports: Two Gigabit Ethernet ports, four RS-232/422/485 ports, four USB 2.0 and one USB 3.0, plus VGA and single-channel LVDS.
  • 6 to 36 V DC, -40 to 85 °C: Wide-range DC input and a bottom heat spreader for fanless operation from -40 to 85 °C, measured at the spreader surface.
View ZETA Series
Processor Brand: IntelIntel
Operating Software: LinuxLinux
Operating Software: WindowsWindows
USB Generation: USB3USB3
mPCIe: 11x mPCIe
Operating Temperature: Extended TemperatureExtended Temp
Operating Temperature: Wide Temperature [-40 to 85°C]Wide Temp
USA Support Team: +1 407 214 9446 Call
Select section
  • Overview
  • Specifications
  • Downloads

ZETA-E3940-8G064A Overview

Vehicle and airborne systems often need analog sensor inputs alongside the computer, but rarely have room for a separate data acquisition board in the stack. The ZETA-E3940-8G064A puts both on one assembly. It is the Atom E3940 data acquisition build in the Diamond Systems ZETA series: a COM Express SBC made of a COM Express Mini Type 10 module, a same-size carrier board and a heat spreader, supplied pre-assembled.

The Intel Atom E3940 is a quad-core Apollo Lake processor at 1.6 GHz, with 8 GB of RAM and 64 GB of eMMC on the module for the operating system and application. Because the COM is an industry-standard module, a later processor can replace it in the same form factor with little or no redesign of the system around it. Graphics drive VGA and single-channel 24-bit LVDS, and a watchdog timer is built in.

The data acquisition circuit gives 16 single-ended or eight differential 16-bit analog inputs at up to 100 kHz aggregate, four 16-bit analog outputs with a waveform generator, 27 digital I/O lines at 3.3 or 5 V logic, eight 32-bit counter/timers and four 24-bit PWMs, all programmed through Diamond’s Universal Driver library. System I/O covers two Gigabit Ethernet ports, four RS-232/422/485 ports, four USB 2.0 and one USB 3.0 port, a MiniCard/mSATA socket and a Micro SD socket. The ZETA-E3940-8G064D swaps the analog circuit for 16 digital I/O lines, and the ZETA-E3950-8G128A pairs the same circuit with an Atom E3950 and 128 GB of eMMC.

Input is 6 to 36 V DC, which suits vehicle supplies directly. The ZETA-E3940-8G064A runs fanless from -40 to 85 °C, measured at the external surface of the bottom heat spreader, which conducts heat into the enclosure and leaves the top side free for expansion. An expansion connector carries two PCIe x1 links, SATA, HD audio and USB 2.0 to Diamond’s optional daughterboards, which add a second MiniCard socket and an M.2 SATA socket. Diamond supports Ubuntu Linux 16.04 LTS and Windows 10 IoT Enterprise LTSB.

ZETA-E3940-8G064A Specifications

Overview
Brand & ModelDiamond Systems ZETA : ZETA-E3940-8G064A
FeaturesCompact
Embedded
Expandable
Fanless
Industrial
Rugged
Performance
Processor SeriesIntel Atom X Series Apollo Lake
Processor ModelsIntel Atom x5-E3940: 1.6~1.8GHz, 4 Cores, 4 Threads, 2MB Cache, 9.5W
Intel Atom x7-E3950: 1.6~2.0GHz, 4 Cores, 4 Threads, 2MB Cache, 12W
Performance Cores4 Cores
Memory8GB Soldered On-board
Operating SystemLinux
Windows 10
Graphics
Display Outputs1x LVDS
1x VGA
I/O
Ethernet2x Ethernet Ports
2x GbE LAN [Board]
USB5x USB Ports
1x USB 3.0 [Board]
4x USB 2.0 [Board]
Serial4x Serial Ports
4x RS232/422/485 [Board]
Expansion
mPCIe1x mPCIe Slots
1x mPCIe [PCIe/USB/SATA]
Storage
Storage1x Micro SD
1x SATA Port
64GB eMMC
Power
Power Input6-36V DC Input [Terminal Block]
Environmental Conditions
Thermal DissipationOptional Heat Spreader
Optional Heatsink
Operating Temperature-40°C to 85°C [-40°F to 185°F]
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Humidity5% - 95% (Non-condensing)
Mechanical Properties
Dimensions84mm x 55mm (3.31" x 2.17")
Data Acquisition Features
Analog Inputs 16 Single-Ended / 8 Differential voltage inputs
Input ranges +/-10V, +/-5V, 0-10V, 0-5V
Maximum Sample Rate 100,000 samples/sec aggregate
On-board FIFO 2048 samples, programmable threshold
DAQ Calibration No calibration required
Analog Outputs 4 16-bit voltage outputs
Output ranges 0-5V, 0-2.5V programmable
A Model Digital I/O 27 lines independently programmable
D Model Digital I/O 16 lines independently programmable for input/output
PWM 4 24-bit pulse width modulators
Counter / timers 8 32-bit counter/timers
Expansion Buses
MiniCard 1 socket combining PCIe x1, mSATA, and USB 2.0 interfaces
SATA 1 port on expansion connector
PCIe 2x PCIe x1 links on expansion connector
USB 1 USB 2.0 port on expansion connector
Ordering Information
ZETA-E3940-8G064A Zeta SBC, E3940 CPU, 8GB RAM, 64GB eMMC, With DAQ
ZETA-E3940-8G064D Zeta SBC, E3940 CPU, 8GB RAM, 64GB eMMC, With DIO
ZETA-E3950-8G128A Zeta SBC, E3950 CPU, 8GB RAM, 128GB eMMC, With DAQ
ZETA-E3950-8G128D Zeta SBC, E3950 CPU, 8GB RAM, 128GB eMMC, With DIO
DK-ZETA-E3940-8G064A-LNX64 Dev Kit, Zeta SBC, E3940 CPU, 64GB eMMC, Linux 64-bit OS
DK-ZETA-E3940-8G064A-WE1064 Dev Kit, Zeta SBC, E3940 CPU, 64GB eMMC, Windows 10 64-bit OS
DK-ZETA-E3950-8G128A-LNX64 Dev Kit, Zeta SBC, E3950 CPU, 128GB eMMC, Linux 64-bit OS
DK-ZETA-E3950-8G128A-WE1064 Dev Kit, Zeta SBC, E3950 CPU, 128GB eMMC, Windows 10 64-bit OS
SDK-ZETA-E3940-8G064A-LNX64 Software Dev Kit, Zeta SBC, E3940 CPU, 64GB eMMC, Linux 64-bit OS
SDK-ZETA-E3940-8G064A-WE1064 Software Dev Kit, Zeta SBC, E3940 CPU, 64GB eMMC, Windows 10 64-bit OS
SDK-ZETA-E3950-8G128A-LNX64 Software Dev Kit, Zeta SBC, E3950 CPU, 128GB eMMC, Linux 64-bit OS
SDK-ZETA-E3950-8G128A-WE1064 Software Dev Kit, Zeta SBC, E3950 CPU, 128GB eMMC, Windows 10 64-bit OS
ZETA-DB-01 Zeta daughterboard with MiniCard and M.2 sockets, audio, and GPIO
ZETA-DB-02 Zeta daughterboard with MiniCard and M.2 sockets

Official Diamond Systems USA Distributor

Things Embedded is an official Diamond Systems USA distributor, supplying the ZETA-E3940-8G064A configured for USA vehicle and airborne projects. Within the Diamond Systems range the ATHENA IV puts a COM Express Type 10 module on a PC/104 board with its own data acquisition circuit, and the DS-MPE-SER4M adds four serial ports through the MiniCard socket.

With a COM Express Mini module and on-board analog I/O the ZETA-E3940-8G064A sits among our COM Express SBCs, our rugged SBCs and our wide temperature computers. Where a vehicle system needs a quad-core Atom and analog measurement on one small board, this is the model to specify.

Consult. Design. Integrate.

Things Embedded is a leading USA supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.