Vecow RCX-2750R PEG Intel Xeon W-1350 or Core i7-11700 Industrial GPU Computer with 4 Front-Access SSD Trays

Inspection lines and mapping vehicles that capture large image sets often need to write them locally before anything leaves the machine, and that data has to survive a failed drive. The RCX-2750R PEG is the storage build of the Vecow RCX-2700 PEG series, an industrial GPU computer with four front-access drive trays alongside room for two full-size graphics cards.

An 11th Gen Intel Rocket Lake-S processor runs on the Intel W580 chipset, with a choice of Xeon W-1350, Core i7-11700, i7-11700T, i5-11500 or i5-11500T. Four DDR4 SO-DIMM slots take up to 128 GB, with ECC memory on the Xeon. Two PCIe x16 slots with Gen4 x8 signal take up to two 750 W, 3-slot NVIDIA or AMD graphics cards within a 1500 W power budget, so the RCX-2750R PEG can run GPU inference or 3D reconstruction beside the CPU workload.

The four front-access 2.5″ SSD or HDD trays sit on four SATA III ports with software RAID 0, 1, 5 and 10, and an M.2 Key M 2280 socket at PCIe x4 adds an NVMe boot drive. Three further PCIe x16 slots with x4 signal take frame grabbers or network cards. One GbE port with iAMT, one 2.5GbE port, six USB 3.2 Gen 2 ports, four RS-232/422/485 ports and 32 isolated DIO cover cameras and triggers, with up to seven displays across three DisplayPort outputs and the graphics cards.

Power for the RCX-2750R PEG is 9 V to 55 V DC through a 4-pin terminal block with 16-mode software ignition control. Vecow rates it from -25°C to 60°C, with shock and vibration tested to IEC 61373 for rolling stock and EN 50155 and EN 50121-3-2 EMC listings. It weighs 9.8 kg. Where data moves off the unit, the RCX-2750 PEG drops the drive trays.